ZAHEES Built in Smart Toilet with Bidet Installation Guide
- June 16, 2024
- ZAHEES
Table of Contents
ZAHEES Built in Smart Toilet with Bidet
Thank you!
Thank you for choosing our product. Please read the instructions carefully before installation and keep it available for future maintenance or reference.
Remote Control installation
-
Clean the wall
-
Remove the sticker
-
Press the fixed frame
-
Put into the remote control
Remote Control Introduction
| Rear Wash| Be seated. Press this button then the water comes out of
wand to clean the rear/front portion of body
---|---|---
| Front Wash| It automatically stops after a cycle of cleaning.
| Stop / Power| Press this button then it will stop working. Keep
pressing this button then the power will be off . Keep pressing this button
again then the power will be on .
| Drying| Be seated. Press this button then it will begin to dry. It
automatically stops after a cycle of drying.
| Flush| Press this button then it will begin to flush.
| Forward Backward| During cleaning press this button then the nozzle
will reach forward / backward
| Flow +/-| During cleaning press this button then the water flow will
be Increase or decrease
| Open / close Lip| Not be seated. Press this button then the lip will
open. Press this button again the lip will close. It automatically closes
after about 90 seconds.
---|---|---
| Water Temperature| Press this button then the water temperature will
be changed. There are four grades
| Seat Temperature| Press this button then the seat temperature will be
changed. There are four grades.
| Dry Temperature| Press this button then the air temperature will be
changed. There are four grades.
| Open / close Seat Light when holding| Not be seated. Press this button
then the seat will open. Press this button again the seat will close. The lip
and seat automatically closes after about 90 seconds.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>