nedis Fully Wireless Earphones with voice control User Guide

: June 7, 2024
: nedis

Table of Contents

Quick start guide
Intended use
Specifications
Main parts (image A)
Safety instructions –
Pairing the earphones to a Bluetooth audio source
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fully Wireless Earphones
with voice control HPBT5053BK

nedis Fully Wireless Cover

http://ned.is/HPBT5053BK

Quick start guide

Assamble image 1 Assamble image 2 Fully Wireless Earphones
HPBT5053BK

For more information see the extended manual online: ned.is/hpbt5053bk

Intended use

The Nedis HPBT5053BK is a pair of fully wireless earphones. The product can be paired with any Bluetooth-enabled audio/ video device.
The earphones can be charged up to 2 times in the fully charged case.
The earphones can also be charged with the battery cable. Any modification of the product may have consequences for safety, warranty, and proper functioning.

Specifications

Product	Fully Wireless Earphones
Article number	HPBT5053BK
Power input	5 VDC ; 0.5 A (charging case)

Main parts (image A)

Lid
Left earphone slot
Right earphone slot
Battery cable
Micro USB port
Micro USB cable
Micro USB port
Charging indicator LEDs
Status indicator LED
Right earphone button
Left earphone button
3 pairs of ear tips (S/M/L)

Safety instructions –

WARNING

Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not expose the product to direct sunlight, naked flames, or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Do not open the product.
Keep the product out of reach from children.
This product is not a toy. Never allow children or pets to play with this product.
Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Listening on high volume for a long time will damage your hearing.
Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Do not short circuit.
Do not repair the product. If damaged, it must be properly disposed of.

Pairing the earphones to a Bluetooth audio source

Take the earphones out of the charging case. The earphones switch on automatically.
Press and hold both earphone buttons A A for 1 second to switch the earphones on manually.
If the earphones are not paired within 3 minutes, they switch off.
A blinks red and blue to indicate pairing mode is active.
Enable Bluetooth on the device you want to pair the earphones with.
Select “HPBT5053BK” from the list of available Bluetooth devices on your device.

Charging the product

Plug the micro USB cable A into the micro USB port A.
Plug the other end of A into a computer or power adapter.
Plug the power adapter into a power outlet.
The charging indicator LEDs A indicate the charging progress of the battery.
Place the earphones into the respective slots A A and close the lid A to charge the earphones.
The status indicator LED A switches off when the earphones are fully charged.
The earphones and the charging case can charge simultaneously.
You can also charge the earphones using the battery cable
A as shown in image B. This allows you to use the product while charging.

Switching off the earphones

Tap and hold A and A for 5 seconds to switch the product off.

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

To answer an incoming call, press A or A.
To reject an incoming call, press and hold A or A for 1 second.
To end a call, press A or A.

Controlling the music

Press A or A to play or pause the music.
Double press A to skip to the next track.
Double press A to skip to the previous track.

Add Siri/Google Assistant function

Press and hold A or A for 1 second to activate Siri/Google Assistant.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT5053BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: webshop.nedis.com/hpbt5053bk#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands