nedis HDMI Switch User Guide
- June 7, 2024
- nedis
Table of Contents
nedis HDMI Switch
Intended use
The Nedis VSWI3482AT switches between 2 HDMI signals, depending on the
configuration.
The product is exclusively intended for switching between HDMI signals using
the switch button.
Configuration A allows the user to switch between 2 different source devices
on a single display.
Configuration B allows the user to switch between 2 different display with a
single source device. The product is not intended for professional use. Any
modification of the product may have consequences for safety, warranty and
proper functioning.
Specifications
| Product | HDMI Switch |
|---|---|
| Article number | VSWI3482AT |
| Dimensions (l x w x h) | 51 x 48 x 20 mm |
| Resolution | Up to 4K2K at 60 Hz |
| Data rate | 5.4 Gbps |
| HDMI type | HDMI 19 pin female |
Main parts
(image A)
1 HDMI port
Button
Status indicator LED
2 HDMI ports
Safety instructions
WARNING
- Only use the product as described in this document.
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not open the product.
- Do not drop the product and avoid bumping.
- Do not expose the product to water or moisture.
- Do not expose the product to direct sunlight, naked flames or heat.
- Place the product on a stable and flat surface.
- Keep the product out of reach from children.
- Make a backup of your data prior to first use.
Connecting the product
Make sure all the devices you want to connect have been switched off.
Depending on the configuration you want to use, follow one of these
instructions accordingly.
In configuration B, only one monitor can be used simultaneously.
Configuration A
(image B)
- Plug 2 HDMI cables (not included) into A .
- Plug the other end of the HDMI cables into the source devices.
- Plug an HDMI cable (not included) into A .
- Plug the other end of the HDMI cable into a display.
Configuration B
(image C)
- Plug 2 HDMI cables (not included) into A .
- Plug the other end of the HDMI cables into the displays.
- Plug an HDMI cable (not included) into A .
- Plug the other end of the HDMI cable into a source device
For more information see the extended manual online: ned.is/vswi3482at
References
- HDMI™ Switch | 3-Port | 1x HDMI™ Input / 2x HDMI™ Input | 1x HDMI™ Output / 2x HDMI™ Output | 4K@60Hz | 6 Gbps | Metal | Anthracite | Nedis
- HDMI™ Switch | 3-Port | 1x HDMI™ Input / 2x HDMI™ Input | 1x HDMI™ Output / 2x HDMI™ Output | 4K@60Hz | 6 Gbps | Metal | Anthracite | Nedis
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>