ACURITE Temperature & Humidity Monitor Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
ACURITE Temperature & Humidity Monitor Instruction Manual
Questions? Contact Customer Support at
877-221-1252
or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Package Contents
1. Temperature & Humidity Monitor
2. Mounting hardware
3. Instruction manual
Features & Benefits
FRONT
- Wireless Signal Indicator
Flashes when data is being wirelessly transmitted.
BACK
2. Sensor Input Plug-in for additional sensors (sold separately).
3. Integrated Keyhole For easy wall mounting.
4. Wired Sensor Retention Slot
– Simplifies cord management when using add-on wired sensors (sold
separately).
5. Monitor ID
– Alphanumeric ID used to identify the Monitor during system configuration.
6. Reset Button
– Resets sensor transmission.
7. Battery Compartment
8. Battery Compartment Cover
9. Mounting Hardware
– Includes drywall anchor and screw.
SETUP
Monitor Setup
-
Install or Replace Batteries Batteries
MUST be installed for this product to operate. AcuRite recommends high quality alkaline or lithium batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. -
Twist off the battery compartment cover.
-
Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
-
Replace the battery cover.
-
Write Down the Monitor’s ID
Record the unique 6-digit alphanumeric ID, located on the back of the Monitor. This unique ID may be referenced for connectivity functions.
ID:___
The Monitor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the Monitor for temperatures below -4°F / -20°C.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY : Clean the battery contacts and also those of the device
prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in
the battery compartment. Promptly remove dead batteries from the device.
Dispose of used batteries properly. Only batteries of the same or equivalent
type as recommended are to be used. DO NOT incinerate used batteries. DO NOT
dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old
and new batteries or types of batteries (alkaline/standard). DO NOT use
rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT
short-circuit the supply terminals.
Placement for Maximum Accuracy
AcuRite products are sensitive to surrounding environmental conditions. Proper placement of the Monitor is critical to the accuracy and performance of the product.
Monitor Placement
The Monitor is designed for indoor or outdoor use. The Monitor stands upright
for tabletop use or is wall-mountable. Place the Monitor outside to observe
outdoor conditions. The Monitor is water-resistant and designed for general
outdoor use. However, to extend its life, place the Monitor in an area
protected from direct weather elements.
Hang the Monitor using the integrated keyhole in a suitable location, like a well-covered tree branch. The best location is 4 to 8 feet (1.2 – 2.4 meters) above ground with permanent shade and plenty of fresh air to circulate around the Monitor.
Important Placement Guidelines
Monitor must be within 330 feet (100 meters) of companion unit (sold
separately).
MAXIMIZE WIRELESS RANGE
Place Monitor away from large metallic items, thick walls, metal surfaces, or
other objects that may limit wireless communication.
PREVENT WIRELESS INTERFERENCE
Place Monitor at least 3 feet (90 cm) away from electronic devices (TV,
computer, microwave, radio, etc.).
LOCATE AWAY FROM HEAT SOURCES
To ensure accurate temperature measurement, place Monitor out of direct
sunlight and away from any heat sources.
LOCATE AWAY FROM HUMIDITY SOURCES
To ensure accurate humidity measurement, locate Monitor away from humidity
sources. Avoid installing the Monitor near indoor pools, spas, or other bodies
of water. Water sources may impact humidity accuracy.
LOCATE AWAY FROM SPRINKLER HEADS
DO NOT install the Monitor where it will be sprayed by a sprinkler system.
This may force water inside the Monitor.
For more information, visit our Knowledge Base at http://www.AcuRite.com/kbase
Basic Setup is Complete
The Monitor is now ready for use, and may be synchronized with a companion
unit.
OPERATION
Using the Monitor
The Monitor features built-in temperature and humidity sensors, to view
current conditions in the location where the Monitor is placed.
Expand the System
The Monitor can be expanded to track additional conditions using compatible
wired sensors (optional; sold separately) that simply plug into the Monitor.
Wired sensors feature an extra-long cord, perfect for installing the sensors
in hard-to-reach places.
Compatible digital displays, wired sensors and companion units are available at: www.AcuRite.com
Add-on Wired Sensors Add-On Sensor
Troubleshooting
If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call 877-221-1252 for assistance.
Care & Maintenance
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives.
Specifications
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference received, including interference that may cause undesired operation of the device.
Customer Support
AcuRite customer support is committed to providing you with best-in class service. For assistance, please have the model number of this product available and contact us in any of the following ways:
877-221-1252
info@chaney-inst.com
24/7 support atwww.AcuRite.com
- Installation Videos
- Instruction Manuals
- Replacement Parts
- Register your Product
- Support User Forum
- Submit Feedback & Ideas
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase.
We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.
Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney. The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For in-warranty claims: Chaney Instrument Co. 965 Wells St., Lake Geneva, WI 53147
It’s More than Accurate, it’s ACURITE.
AcuRite offers an extensive assortment of precision instruments, designed to
provide you with information you can depend on to
Plan your day with confidence™.
Printed in China
00275 INST 060115
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.
References
- Home
- AcuRite Weather Monitoring | #1 Weather Station Brand in North America
- AcuRite
- Acurite GDPR Notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>