brinno Command Center Instructions

: June 3, 2024
: brinno

Table of Contents

brinno Command Center
Instruction
Download & Install Brinno Commoand Center
Install offline Brinno Command Center
Before using Brinno Command Center
Brinno Command Center Step by Step
Appendix & Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

brinno Command Center

Instruction

brinno-Command-Center-1

Go to TLC2000 / TLC2020 support page to down- load ﬁrmware in your desired language. Follow the PDF instructions or video tutorial to complete ﬁrmware upgrade.

Download & Install Brinno Commoand Center

Download the Brinno Command Center installer.
Download the installation ﬁle and follow system instructions to complete the installation.

Create Shortcut.
Create a shortcut on the desktop by selecting “Create a desktop shortcut”.

Install offline Brinno Command Center

After installing the online Brinno Command Center, the computer will automatically execute Brinno Connect and open the command center with the default browser.

Click “Install app for ofﬂine use” to install ofﬂine Brinno Command Center. (Mandatory step)
The download button might not appear immedi-ately, so please wait for it to appear before clicking.

Click “INSTALL” once the reminder window pops out.

Once the ofﬂine Brinno Command Center is successfully installed, the ofﬂine com-mand center window will pop out, and then you can close the online command center.

Before using Brinno Command Center

Install batteries to the Power Housing Battery Slot correctly.
Install 8 AA batteries on one side. If correctly inserted, the LED lights up. Next, remove one battery from the same side so the LED light turns off. Install another 8 AA batteries on the other side, if correctly inserted, the
LED lights up again. Once conﬁrmed that both sides of batteries were in-
serted correctly, insert the removed battery back to the battery slot. This will conﬁrm that all 16 AA batteries were installed correctly.

Connect Brinno Camera Extender Kit (AFB1000) and battery slot to the camera.
Plug the cable into the Multi-task Dongle using the port on the left side. Plug the Battery Slot Micro USB connector into the port on the right side. Restart the camera – the dongle LED will turn GREEN, indicating you are ready to start ﬁlming.

PLEASE FOLLOW THE STEPS BELOW TO MAKE SURE YOUR CAMERA IS INSTALLED CORRECTLY

Make sure your camera is powered off before connecting to the Brinno Command Center.
Turn off your camera and plug the cable into your laptop or tablet and then open the Brinno Command Center.

Brinno Command Center Step by Step

Open the Brinno Command Center on your computer.

The Online Brinno Command Center will check for the latest ﬁrmware from the server when your computer is connected to the internet.
The Ofﬂine Brinno Command Center is more stable when used ofﬂine(during operation under a non-internet environment.)

When the software starts, an operational window will pop-up followed by your web browser popping up with the Brinno Command Center page.
Minimize the operational window but do not close it otherwise you will disrupt the camera’s connection.

Click “Connect” to complete the camera’s connection.
Open the online Brinno Command Center and conﬁrm the ﬁrmware version and feature updates.

While using an Internet connection, the online Brinno Command Center will detect whether the camera’s ﬁrmware is the latest version. If it’s not, there will be a pop up notiﬁcation to tell you to update your ﬁrmware.
Go to the TLC2000/TLC2020 support page and download ﬁrmware in your desired language.