brinno TLC300 Time Lapse Camera User Manual
- June 12, 2024
- brinno
Table of Contents
brinno TLC300 Time Lapse Camera
Product Information
- Product: Time Lapse Camera TLC300
- Version: EN A5 202303
Product Usage Instructions
- Prepare the following items:
- TLC300 Camera
- SD Card
- 4 AA Batteries
- Micro USB and DC Adapter
- If you are using a new SD card that is over 32GB, it needs to be formatted by the camera before use. To format a new SD card, insert it into the camera and follow the formatting prompts on the LCD screen.
- Download the firmware upgrade package from the following location: www.brinno.com/pages/support-tlc300
- Unzip the compressed file and find two folders: STEP1 and STEP2.
- STEP 1:
- Duplicate the “tlc300bl.uf2” file in the STEP 1 folder to the root directory of the SD card (SD:/).
- Install 4 new AA batteries to the camera and connect the camera to external power using a micro USB and DC adapter.
- Insert the SD card into the camera.
- Turn on the camera and it will automatically upgrade the firmware.
- The LED indicator and the LCD display will flash constantly for about 1 minute while the firmware is upgraded.
- When the upgrade is completed, the camera will restart automatically and return to the preview screen.
- Turn off the camera and remove the SD card for the next upgrade procedure.
- STEP 2:
- Duplicate the “tlc300fw.bin”, “tlc300hw.udf”, and “tlc300ui.uf2” files in the STEP 2 folder to the root directory of the SD card.
- Install 4 new AA batteries to the camera and connect the camera to external power using a micro USB and DC adapter.
- Insert the SD card into the camera.
- Turn on the camera and it will automatically upgrade the firmware.
- The LED indicator and the LCD display will flash constantly for about 5 minutes while the firmware is upgraded.
- When the upgrade is completed, the camera will restart automatically and return to the preview screen.
- To confirm the firmware version, go to MENU > Advanced > System Info on the camera.
- Do not turn off the power or remove the SD card while the camera is updating firmware, as it may damage the camera.
Note: For further support, contact customerservice@brinno.com or visit www.brinno.com.
Prepare items
We recommend that the SD card that came with the camera be used for all firmware updates. If you are using a new SD card that is over 32GB it will need to be formatted by your camera before it can be used. To format a new SD card, insert the card into your camera and follow the formatting prompts on the LCD screen before you start the firmware upgrade process.
Download Firmware
STEP 1
Download Firmware
- Download the firmware upgrade package from the location below: www.brinno.com/pages/support-tlc300
- Unzip the compressed file and find two folders, “STEP1” and “STEP2” folders.
- Upgrade your firmware in two steps.
Duplicate the “tlc300bl.uf2” file in the “STEP 1” folder to the root directory of the SD card. (SD:/ ) Install 4 new AA batteries to the camera and connect the camera to external power using a micro USB and DC adapter. Insert the SD card into the camera. Turn on the camera and it will automatically upgrade the firmware. The LED indicator and the LCD display will flash constantly for about 1 minute while the firmware is upgraded. When the upgrade is completed, the camera will restart automatically and return to the preview screen. Turn off the camera and remove the SD card for the next upgrade procedure.
STEP 2
Duplicate the files in the “STEP 2” folder to the root directory of the SD
card. Install 4 new AA batteries to the camera and connect the camera to
external power using a micro USB and DC adapter. Insert the SD card into the
camera. Turn on the camera and it will automatically upgrade the firmware.
Step 2 upgrading procedure will take longer, the LED indicator and the LCD
display will flash constantly for about 5 minutes while the firmware is
upgrading. When the upgrade is completed, the camera will restart
automatically and return to the preview screen. Confirm the firmware version
in the camera setting. MENU>Advanced>System Info
Note: Do not TURN OFF power or REMOVE the SD card when the camera is
updating firmware as that will damage the camera!
Supports: customerservice@brinno.com www.brinno.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>