alza power APW-PSM1500S Power Station Metal User Manual

: June 9, 2024
: alza power

Table of Contents

alza power APW-PSM1500S Power Station Metal
TECHNICAL PARAMETERS
OVERVIEW
INSTRUCTIONS
SAFETY INFORMATION
WARRANTY & SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

alza power APW-PSM1500S Power Station Metal

THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.

We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!

Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

Packaging you can eat. Well, almost:

We use ink made from soybeans as opposed to classic petroleum-based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.

We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place the findings of the scientific community into practice. We don’t just try to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

Battery type	Lithium-iron-phosphate (LiFePO4)
Capacity	1497.6Wh /58.5 Ah/25.6V
Maximum output power (total)	1500W
2 x output AC outlet	230 V / 50 Hz, output in pure sine wa11e
4 > < output USB- A	SV/2,4A(max.12W),9V/2A(max.18W),

OVERVIEW

OVERVIEW (FRONT PAGE)

alza-power-APW-PSM1500S-Power-Station-Metal-fig-1

LCD display Shows information about the operating status of the battery station.
The main switch Turns on/off the battery station
DCON/OFF Turns DC charging on/off
AC On/OFF Turns AC charging on/off
USB connectors 4 x USB-A, 1″ USB-C
DC 12V connector To connect two-wire power cables type 5521
Jump starter To connect jump start cables
AC 230V sockets To connect standard mains plugs (e.g. a notebook adapter)
12V cigarette plug To connect devices equipped with a cigarette lighter plug.

OVERVIEW (BACK PAGE)

Input DC INPUT 1 Connector DC 5521 (female) to connect a power adapter
Input DC INPUT 2 Connector DC 7909 (male) to connect a cable from the solar panel

INSTRUCTIONS

Charging the station
Charge the station using only the supplied power adapter. The station can also be charged using a solar panel, but this is not included in the package.

If you are going to charge the station using an adapter, connect its connector to the left power input(marked De INPUT 1 N).
Connect the connector from the solar panel to the right power input (marked “DC INPUT 2”).

Starting operation and use
To start the station tum the main switch to the I position. The blue indicator beside the switch turns blue along with the LCD display. The station is now ready for use. The display will show the time that has elapsed since the last power-up, information about the current power of the battery station in watts (W), and the remaining battery capacity in percent.

Oarglng with dlrac:t currant (sodrab marked DC)

Direct current is used to power devices connected to the USB-A or USB-C connectors, to a 12V cigarette connector, or to a two-wire 12V connector.
Plug the device you want to charge into the desired connector.
Press the DC ON/OFF button. The display shows De OW and charging starts.
Once the charging is complete, press first the button DC ON/OFF and then unplug the cable from the charging connector.

Charging with attempting content(sockets marked AC)

Alternating current is used to power devices and appliances equipped with a standard mains plug connected to one of the sockets marked AC 230V.
Plug the device you want to charge or use into one of the sockets.
Press the AC ON/OFF button. The display shows Ac ONH and charging starts.
Once the charging is complete, press first the AC ON/OFF button and then disconnect the plug from the socket.

Using jump starter

The battery station has enough power to start a vehicle’s engine. However, before using the jump starter, make sure that the remaining battery capacity is at least 60%.
Observe the correct polarity of the jumper cables.
After connecting the jumper cables to the battery station, tum it on with the main power switch and then turn the ignition key.

Displayed error messages and their solutions

OVERLOAD (-rlaad)
The message “OVERLOAD” appears on the display if the power consumption of the devices connected to the AC sockets is too high. Disconnect one of the devices and try it again by pressing the AC ON/OFF button.

HI-TEMP (temperature too high)
This warning message indicates that the temperature inside the station is too high. It appears when the temperature exceeds BO °C. In this case, the station cannot be used. Tum off the station with the main switch, wait until the temperature drops below at least 40 ° C, and switch it on again.

SAFETY INFORMATION

Please check compatibility with the information specified on the product before use.
Unplug the product from power sources when not in use.
Use the product only for the purposes for which it is designed.
Improper use of the product may present a risk of fire, explosion, or other hazards and may void your warranty.
This product is not a toy. It may contain small components. Please keep away from children.
Do not use or leave the product in a dusty or otherwise polluted environment.
Do not expose the product to high temperatures or low temperatures. Store the product in a dry place
Do not disassemble the product. Inexpert modifications can damage the product and cause serious injuries.
Do not use the product if it is damaged or emits a suspicious odor.
Use a soft, clean, dry towel for cleaning the surface of the product.
Do not disassemble the product. Inexpert modifications can damage the product and cause serious injuries.

WARRANTY & SUPPORT

Your new product is protected by our 24-month warranty, or extended warranty(if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centers.

Online: www.alzashop.com/contact.

Cesko +420225 340111
Deutschland +49 3222 1096000
Magyarország +36-1-701-1111
Österreich +43 720815999
Slovensko +421 257 101 800
United Kingdom +44 (0)2035144411

The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item.

This product meets all of the related basic EU regulatory requirements. The EU declaration of conformity is available at www.alzashop.com/doc.
This product sold in the European Union meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). alza-power-APW-PSM1500S-Power-
Station-Metal-fig-3