brinno ART200 Pan Lapse Rotating Camera User Guide

brinno ART200 Pan Lapse Rotating Camera

Product Information

The ART200 is a Pan Lapse device that allows for smooth and controlled rotation of your camera or smartphone. It comes with various components including a smartphone clamp, tripod mount for the camera, tripod mount, power ON/OFF switch, and battery cover. The device also features a LED indicator that displays the battery status, power on/off status, time lapse working status, and Bluetooth connectivity status.

Product Usage Instructions

1. Install the Brinno Pan Lapse APP on your smartphone by visitingwww.brinno.com/art200.
2. Turn on Bluetooth on your smartphone.
3. Open the Brinno Pan Lapse APP.
4. Connect your smartphone to the Pan Lapse device via Bluetooth.  A pop-up screen will appear if your smartphone’s Bluetooth is turned off.
5. Attach your camera or smartphone to the appropriate mount on the Pan Lapse device.
6. Adjust the desired settings on the APP for rotation speed, direction, and duration.
7. Press the power ON/OFF switch on the Pan Lapse device to turn it on.
8. Monitor the LED indicator on the device for battery status, power on/off status, time lapse working status, and Bluetooth connectivity status.
9. Once you are ready, start the time lapse recording using the controls on the APP.
10. To stop the rotation, press the power ON/OFF switch on the Pan Lapse device to turn it off.

Parts of Pan Lapse

1. Smartphone Clamp
2. Tripod Mount for Camera
3. Tripod Mount
4. Power ON/OFF Switch
5. Battery Cover Status LED Indicator
6. Red: Battery Low
7. Green: Power On Non-Stop Rotating
   • Green Light Blink: Time Lapse working
8. Blue: Bluetooth Connecting

Power On

Smartphone Clamp Camera Tripod Mount

Caution

Installing Brinno Pan Lapse APP on your smartphone

For more information please go to:

Brinno APP

You may rename your device. ( Six characters limited)

Setting

1. Set Speed
   • 1: Slow
   • 10: Fast : Non Stop(Fastest)
2. Set Time Interval (This time interval should match the setting on your time lapse camera.)
3. Set Panning Angle (Back-and-forth sweeping)
4. Press “OK”
5. Choose Direction and Start

Tip-1

1. Video Recording:
   When Speed Setting is “ ” with time interval “0”, Pan Lapse will Non-Stop Rotating. Ready Approx.
   Panning Time: 2 min /32 Sec

2. Time Lapse Recording:
   Speed setting should not be “ ” . Time Interval setting should not be “0” .

Tip-2

How To Set Perfect Panning Angle?

Ex:

• If camera Fov =120° Plan to shoot a 180° panning time lapse
• Panning angle = 180°-120° =60°

Tip-3

FCC

Note
NCC LP0002
FCC FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>