brinno MAC200 DN Outdoor Security Camera User Guide
- June 12, 2024
- brinno
Table of Contents
brinno MAC200 DN Outdoor Security Camera
Installation
Preview Screen
-
Capture Mode
M
Motion Mode
**T**
Time Lapse Mode
**H**
Hybride Mode -
Timer
-
Night Vision
-
overwite
-
Battery Status
Set Date and Time
ST: Standard Time /DT : Daylight Saving Time
Start Recording
Motion Mode
Time Lapse Mode
Hybrid Mode
**Stop Recording
**
- Hold “OK” Until The screen turns on.
Set Capture Mode
Motion Mode
Time Lapse Mode
Image captured at a Fixed Capture Rate are capture in the Time lapse mode and cover a range over 100 meters deep in the capture area.
Hybrid Mode
Brinno Hybrid Mode combines Fixed Capture Rate and Flexible Motion Detection, They provide Dual Protection in the Hot Zone. In standby mode the camera will capture images at your desired Capture Rate ( 2 Second -24 hours) When motion is detected the camera will switch to motion Mode and capture 2-3 frames per second. You Will never miss a shot!
Quick Guide
Menu Setting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>