ASHATA ishuyzm421-1 3D Surround Sound TV Speaker User Manual
- June 13, 2024
- ASHATA
Table of Contents
ASHATA ishuyzm421-1 3D Surround Sound TV Speaker
Introduction
The ASHATA ishuyzm421-1 is not your average TV speaker. Designed with meticulous care and incorporating a range of features, this speaker aims to transform your auditory experience. From computer usage to TV binge-watching, this versatile 3D surround sound speaker with Bluetooth 5.0 is set to elevate your multimedia experience.
Key Features
- Bluetooth 5.0 Connectivity: The speaker comes with Bluetooth 5.0, offering faster connection times and lower power consumption. Pairing devices such as smartphones and tablets is simple, taking your mobile entertainment to a new level.
- USB Power Supply: Forget the hassle of batteries; this machine relies on a USB power supply, which means you can plug it into your computer or mobile phone charger.
- Double Speaker Design: The ASHATA ishuyzm421-1 boasts a double speaker design to deliver cinema-grade sound effects. The 3D sound effect is more three-dimensional and realistic, enhancing your overall experience.
- Sleek Design: The flat and long body of the speaker has a slight angular design to optimize the acoustic effect of the sound. It can easily be mounted on a bar or plugged into your system, making it versatile and user-friendly.
- Note on Battery: It’s essential to note that this speaker does not contain an internal battery and must be plugged in to operate.
Technical Specifications
- Product Size : Approximately 320x65x60mm
- Output Power : 3W
- Frequency Response : 30Hz~15KHz
- Signal to Noise Ratio : ≥65dB
- Power Supply Voltage and Current : USB/DC 5V, 600mA
- Channel : 2.0
- Bluetooth Version : 5.0
- Effective Distance : ≤10 meters
How To Use
- Powering Up: Since the speaker doesn’t have an internal battery, you’ll need to plug it into a USB jack of either a computer or mobile phone charger. For enhanced sound quality, use a charger with 1000mA or more.
- Booting: Once the power is plugged in, press the knob to turn the speaker on. The speaker will then emit a “sound source input mode” prompt and the light on the speaker will illuminate.
- Bluetooth Connection: To connect via Bluetooth, switch the speaker to Bluetooth mode by pressing the knob. From there, follow the regular steps on your Bluetooth-enabled device to pair with the speaker. The initial pairing password is “0000”.
What’s in the Box
- 1 x Computer Audio
- 1 x Chinese Manual
Usage Instructions
- Power Supply : This speaker requires a USB power supply and must be plugged in to operate. Plug the speaker into a computer or mobile phone charger with an output of DC 5V 600mA or more for better performance.
- Bluetooth Connection : To use Bluetooth features, make sure to switch the speaker into Bluetooth mode by pressing the knob on the device. From your Bluetooth-enabled device, find the speaker and enter the pairing code “0000” to establish the connection.
- Placement : For optimal sound experience, place the soundbar in front of your TV or computer screen, and align it with the middle of the display.
- Sound Settings : The speaker might have different sound modes like 3D Surround, Cinema, or Night Mode. Familiarize yourself with these to optimize the listening experience.
Care and Maintenance
- Dusting : Keep your speaker clean by lightly dusting it with a soft, dry cloth.
- Moisture : Keep the speaker in a dry place and avoid areas with high humidity to prevent internal damage.
- Cables and Connectors : Periodically inspect all cables and connectors to ensure they are in good condition. Replace any worn-out cables as needed.
- Software Updates : If applicable, keep an eye out for firmware or software updates that might improve the speaker’s functionality or correct issues.
- Temperature : Store and use the speaker in a moderate-temperature environment. Excessive heat or cold could damage internal components.
Safety Instructions
- Mounting : If you are mounting the speaker, make sure it is securely fastened to prevent it from falling and causing injury.
- Volume Levels : Be mindful of the volume level to avoid hearing damage. Always start at a low volume and gradually increase to a comfortable level.
- Electrical Safety : Ensure that the speaker is connected to a properly grounded electrical outlet. Disconnect the speaker during electrical storms to prevent any potential damage.
- Child Safety : Keep the speaker and its components out of reach of children to avoid any potential hazards.
- Unattended Operation : If you’re not using the speaker for an extended period, it’s advisable to unplug it to save energy and reduce wear and tear on the unit.
FAQs
How do I power up the ASHATA ishuyzm421-1 speaker?
Plug the speaker into a USB jack of either a computer or mobile phone charger with an output of DC 5V 600mA or more.
How do I turn on the speaker?
Once the power is plugged in, press the knob on the speaker to turn it on.
How do I connect my device to the speaker via Bluetooth?
Switch the speaker to Bluetooth mode by pressing the knob, then follow the regular steps on your Bluetooth-enabled device to pair with the speaker. The initial pairing password is '0000'.
What is the power supply requirement for the speaker?
The speaker requires a USB power supply with an output of DC 5V 600mA or more.
Can I use batteries to power the speaker?
No, the speaker does not contain an internal battery and must be plugged in to operate.
How should I place the speaker for optimal sound experience?
Place the soundbar in front of your TV or computer screen, aligning it with the middle of the display.
Are there different sound modes available on the speaker?
Yes, the speaker might have different sound modes like 3D Surround, Cinema, or Night Mode. Familiarize yourself with these to optimize the listening experience.
How do I clean the speaker?
Keep your speaker clean by lightly dusting it with a soft, dry cloth.
Can I mount the speaker?
Yes, if you choose to mount the speaker, make sure it is securely fastened to prevent it from falling and causing injury.
What should I do during electrical storms?
Disconnect the speaker from the electrical outlet during electrical storms to prevent any potential damage.
Can children use the speaker?
Keep the speaker and its components out of reach of children to avoid any potential hazards.
Should I unplug the speaker when not in use?
It is advisable to unplug the speaker if you're not using it for an extended period to save energy and reduce wear and tear on the unit.