Denver portable DVD player single screen User Guide

June 7, 2024
Denver

DENVER® MT-1084NB USER’S GUIDE

FUNCTIONS & CONTROLS

Side View

DENVER® MT-1084NB

Front View

Front View

REMOTE

Remote Battery

The remote control needs to install battery. When using remote control at the first time, please pull out the insulation sheet from the button cell holder. The battery will be energized and ready to use.

diagramRemote Battery

Battery Installation/removal

Battery Installation-removal

Please note: Battery type required is “Cr2025”

REMOTETFT
LCD On/Off

MUTE
Press to mute the volume.

SETUP
Press to access the setup menu.

ARROWS /OK
OK
is used for selecting; Up / Down / Left / Right directions buttons are used for moving Up / Down / Left / Right in disc menu or setup menu.

AUDIO
Press to change the audio setting according to the disc.

OSD
Display current title and time of playback.

PLAY /PAUSE
BACKWARD
Press to rewind. Press to change the speed mode of rewind.

FORWARD
Press to fast forward. Press to change the speed mode of fast forward.

PREV
Press to skip back between chapters or tracks.

Next
Press to skip forward between chapters or tracks

MODE
Press to switch between AV IN and DVD mode.

SD /USB
Press to select between DVD, USB and SD/MMC card input.

REPEAT
Press to repeat the current chapter or track.

GO TO
Press to select the time you want to start playing with the number keys.

SUBTITLE
Press to switch caption and turn on or off.

PROG
Press to play contents of disc in the order you want by programming the track to be played.

ANGLE
On supported DVDs, press and hold to view alternate angles.

ZOOM
Press to zoom in or zoom out the image on the display when playing a loaded DVD.

VOLUME +/-
Press to adjust the volume level.

WIDE
Press to switch between different aspect ratio settings.

MENU
Press to access DVD disc menu.

TITLE
Press to access the title menu of a loaded DVD.

STOP

POWER

Power and Charging the Internal Battery

DC Power input: requires an AC/DC adapter, or 12V DC car adapter (included).

TO POWER THE UNIT , plug the included AC/DC adapter into the unit and a standard wall outlet.

If using in a car, plug the 12V DC car adapter into the unit and a standard 12V Power outlet in the car.

The Power Indicator will turn green whenever the portable DVD player is powered on.

The Charge Indicator will turn red whenever the battery is charging.

POWER

CONNECTING & PLAYING MEDIA

Loading and Playing a Disc

  1. Slide the Open latch to open the Disc Door.
  2. Load a disc into the DVD player , label side facing up. Close the Disc Door. After a disc is loaded, it will begin playing automatically.
  3. If the disc does not begin playing automatically, press the Play/Pause button.

Programming a Loaded Disc

  1. While the loaded disc is playing, press the PROG button on the remote control.
  2. Use the Arrow buttons to select a program slot.
  3. Use the Number Keypad to enter in the chapter and title, or track.
  4. Titles and chapters, or tracks will play in the order they are listed.
  5. Repeat step 3 until the desired titles and chapters, or tracks are programmed.
  6. Use the Arrow buttons to highlight the on-screen START button. Press the OK button to begin playing the programmed disc.

Connecting a USB Thumb Drive

AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported.

  1. Connect a USB thumb drive to the USB Port.
  2. Press the DVD/SD/USB button to enter DVD/SD/USB mode.
  3. Use the Up/Down Arrow and Play buttons to select USB mode and play content from the connected USB thumb drive.

Connecting a Memory Card

AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported. Note: Formats are not universally compatible. Playback may be dependent on recording conditions.

  1. Connect a SD or MMC memory card to the Memory Card Port.
  2. Press the DVD/SD/USB button to enter DVD/MCR/USB mode.
  3. Use the Up/Down Arrow and Play buttons to select MCR mode and play content from the connected memory card.

Accessing the Setup Menu

To access the Setup Menu, press the Setup button on the DVD player or the remote control.

Using the 3.5mm AV Output

Require a 3.5mm to 3x RCA audio/video cable (included).

  1. Connect the 3.5mm to 3x RCA audio/video cable to the AV Output on the unit’s display.
  2. Connect the 3.5mm to 3x RCA audio/video cable to the RCA stereo audio inputs and c omposite video input on a television.
  3. Audio and video played through the portable DVD player will now be seen and heard through the connected television.

Using the 3.5mm AV Input

Require a 3.5mm to 3 x RCA audio/video cable (included).

  1. Connect the 3.5mm to 3 x RCA audio/video cable to the 3.5mm AV Input on the portable DVD player and the composite video outputs on an audio/video source such, as a television.
  2. Press the DVD/AV In button to switch to AV In mode.
  3. Audio and video played from the connected source (a television) will now be output to the portable DVD player.

WARNING

a. Do not ingest battery, Chemical Burn Hazard
b. The remote control contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death
c. Keep new and used batteries away from children.
d. If the battery compartment does not close securely, stop using the product and keep it away from children
e. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention

AC/DC adapter

AC-DC adapter

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Denver Logo

Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.

Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.

All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup

www.facebook.com/denverelectronics

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals