MYKRONOZ ZeBuds Pro Earbuds User Guide

: June 7, 2024
: MyKronoz

Table of Contents

MYKRONOZ ZeBuds Pro Earbuds User Guide
OVERVIEW
CHARGING
LED INFORMATION
- Battery status
Charging status
HOW TO PAIR WITH ANOTHER SMARTPHONE
OPERATIONS
TROUBLESHOOTING
I Can’t hear other end on phone calls / Poor Audio Quality
TECH SPECS
I WIRELESS CHARGING CASE:
WHAT’S IN THE BOX
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MYKRONOZ ZeBuds Pro Earbuds User Guide

OVERVIEW

LEFT EARBUD RIGHT EARBUD WIRELESS CHARGING CASE

USB-C CHARGING CABLE

CHARGING

Before the first time use, make sure to fully charge your ZeBuds Pro inside their charging case with the USB-C cable for about 2 hours. You can also charge your
ZeBuds wirelessly into their charging case with a Qi-certified charging pad. Make sure to place the center of the charging case on
the center of the wireless charger.

ZeBuds Pro and its charging case will reach maximum battery capacity in order to provide you with up to 20 hours playtime.
ZeBuds Pro can deliver about 4 hours of battery life. When reaching low battery level, you will hear an audio indication in your earbuds inviting you to put them back
in the charging case to recharge them. It will take about 90 minutes to fully charge your earbuds in the charging case. Once the charging case is fully charged, you can recharge your earbuds up to 4 times until it reaches low battery.

LED INFORMATION

Battery status

There are 3 LED indicators in the charging case to indicate its built-in battery level.
I 3 LEDs ON = between 75% and 100%
I 2 LEDs ON = between 25% and 75%
I 1 LED ON = below 25% and requires your attention
I LED OFF = 0% battery

Charging status

There is 1 LED indicator in front of the charging case to indicate the charging status of the case itself. I Start charging The LED indicator will start flashing
slowly for 15 seconds before it turns off.
Note: Each time you open or close the charging case, the indicator light stays on for 3 seconds before going off.

PAIRING

In order to pair your ZeBuds Pro with your smartphone, please follow the below instructions:

Search for the MyKronoz App in the App store or Google Play store, download and install the App on your mobile device.
Open the MyKronoz App on your mobile device. Sign up if you are a new member or login with your existing account.
Ensure the Bluetooth® is enabled on your mobile smartphone.
Then follow the on-screen instructions.
When your ZeBuds Pro are successfully paired, you will be notified on your mobile device’s screen and white LED on either earbud will stay solid state for one second then turn off.
You’re now ready to enjoy your new ZeBuds Pro.
Note: Thanks to the MyKronoz mobile app you’ll also enjoy new features and performance improvements.

HOW TO PAIR WITH ANOTHER SMARTPHONE

Android user: To pair your ZeBuds Pro with another phone, please unpair ZeBuds Pro from MyKronoz mobile app first, then perform a new pairing procedure with another smartphone as mentioned above.
iOS user: To pair your ZeBuds Pro with another phone, please forget ZeBuds Pro from your
iOS device’s Bluetooth list, then perform a new pairing procedure with another smartphone as mentioned above.

OPERATIONS

diagram

Play / Pause| x2|
---|---|---
Next track| | | x2
Voice control| x3| ou| x3
Answer call| x2| ou| x2
Reject call| Press & hold for 3 seconds| ou| Press & hold for 3 seconds
End call| x2| ou| x2

TROUBLESHOOTING

I Bluetooth® disconnection issues
ZeBuds Pro are Bluetooth® 5.0 earphones, which provide a more stable connection with
compatible mobile devices and less interference.

Make sure that both devices are within Bluetooth® range.
Ensure both earphones have enough battery power.
Make sure to install all available updates to the My Kronoz app.
Put the earbuds back to the charging case. Then take the earbuds out of the case. Reboot your Bluetooth® device and pair the earbuds once again after restarting.

I Bluetooth® connection issues

Insert the both ZeBuds back into the case and open the case to enter pairing mode again.
Make sure the mobile device is within 10m of ZeBuds when trying to pair initially.
Double tap on the top section (touch area) of 2 earbuds at the same time to reconnect both earbuds together. If it works, the 2 earbuds will start blinking very quickly, then the light stays on for 2 seconds. After that, the lights blink in normal speed.

I Can’t hear other end on phone calls / Poor Audio Quality

Adjust the volume on the connected mobile device.
Move to another area with better quality signal.
Make sure your ZeBuds are fully and properlyinserted into your ears.
Ensure the mobile device is within 10m of ZeBuds while on a call.

TECH SPECS

I EARBUDS:
Bluetooth® 5.0 – Dimensions: 17.84319mm – Weight: 4 g each – Battery capacity: 40 mAh Battery life: up to 4h of playtime – Charging time: 20 min for 1h listening / 1h30 full charge Dual microphone – Speaker impedance: 32 – Frequency: 20Hz/20KHz – IPX4 water resistant – Operating temperature: -10°C to +60°C

I WIRELESS CHARGING CASE:

Dimensions: Ø 55,5 x 22mm – Weight: 48 g – Battery capacity: 380 mAh – Battery life: 16h of extra playtime – Charging time: 1h30 for full charge – Wireless charging (Qi compatible or via USB-C cable Compatible with iOS and Android devices. 1 year international warranty.