PawHut D00-188V00,D00-188V01 Pet Stroller User Guide

PawHut D00-188V00,D00-188V01 Pet Stroller

Important Information

WARNING: Keep Away From Fire

1. Please read this instruction carefully before use and keep it properly for future reference. If you do not follow this instruction, the safety of pets may be affected.
2. Do not leave the caregiver while the product is in use.
3. Do not use accessories not provided by the manufacturer.
4. Any load attached to the handle will affect the stability of the pet stroller.
5. Ensure that all the locking devices are assembled before using the pet stroller.
6. Pets must use restraints when using.
7. Do not use the pet stroller in rough areas, near stoves and other dangerous areas.
8. Avoid use or storage in damp, cold or high temperature environment and keep away from fire or strong heat source.
9. Do not use it to put dangerous animals which are aggressive and destructive.

Maintenance and Care

Please check and maintain the pet stroller frequently. The cloth cover cannot be dipped and washed. When the cloth cover is cleaned, please use a brush and other cleaning instruments to clean the dirt.

Parts

• Stroller frame x1

• Front wheel x2

• Rear wheel x2

Unfolding and folding pet stroller

1. Unfolding frame
   Take out the frame, hold the handle bar and lift it up. It is ok when you hear “click” ; After opening the frame, snap the buckle onto both sides of the tube, make the convex point inside the seat just stuck in the hole above the plastic joint on both sides of the handle tube. Finally unfold the canopy and zip it up.

2. Folding frame
   In the braking state, unzip the zipper and close the canopy first. And then, lift up the two sides of the folding keys, hold the handle to press down. The frame can be folded and hang the hook finally.

Use of wheels

1. Install & disassemble front wheels :
   Insert the front wheel set into the front wheel seat, it is installed when hear ”Click”. Press the buckle on the front wheel seat with your hand and pull it down, then the front wheel set is removed.

2. Install & disassemble rear wheels:
   Insert the rear wheel set into the rear wheel seat, it is installed when the barb on the rear wheel seat pops out .Hold the barb on the rear wheel seat and pull it out, the rear wheel set can be removed.

Use of other functions

1. Brake:
   press down the brakes on both sides Motion:
   hook the rear wheel brakes on both sides

2. For pet safety belt

CUSTOMER SUPPORT

If you have any questions, please contact our customer care center, Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA

Documents / Resources

| PawHut D00-188V00,D00-188V01 Pet Stroller [pdf] User Guide
D00-188V00 D00-188V01 Pet Stroller, D00-188V00, D00-188V01 Pet Stroller, Pet Stroller, Stroller
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>