MYKRONOZ ZeCircle Activity Tracker User Guide
- June 17, 2024
- MyKronoz
Table of Contents
MYKRONOZ ZeCircle Activity Tracker
OVERVIEW
To interact with ZeCircle touchscreen, tap on the touch-sensitive area below the display section. ZeCircle touchscreen only respond to tap gestures in this specific touch-sensitive area. Other type of gestures like sliding, swiping, or pressing will not be detected. ZeCircle screen turns off when not in use. Single tap the touch area to wake the device. To ensure ZeCircle is responding accurately to your taps, we recommend using your fingertip and not your nail.
CHARGING
Charge ZeCircle for two hours before your first use.
- Put ZeCircle on the magnetic charging dock
- Make sure the 5 pins on the charging dock fit correctly onto the charging terminals on the back of ZeCircle
- Plug the small end of the USB cable provided into the charging’s dock USB port
- Plug the big end of the USB cable into a power source
- A battery indicator will fill to indicate the charging is in progress. Once ZeCircle is charged, the battery indicator will be full
A full charge takes 1:30 hours. When the battery level gets low, a battery indicator will appear.
PAIRING
The first time you use ZeCircle, a SET UP message will prompt you to set up your ZeCircle using a mobile device or a computer.
GET ZeCircle APP
To set up your ZeCircle using your mobile device, you first need to get
ZeCircle App. Search for ZeCircle App in the App store, Google Play or Windows
Phone store, download and install the App on your mobile device.
System Requirements
iOs
iOS 7+ devices with Bluetooth 4.0 BLE iPhone 4s, 5, 5c, 5s, 6, 6 Plus, iPad (3rd, 4th and 5thgen) iPad Mini, iPod touch (5thgen)
Android
Select Android 4.3 + devices that support Bluetooth 4.0 BLE
Windows Phone
Select Windows Phone 8.1 that supports Bluetooth 4.0 BLE
- Enable Bluetooth on your mobile device
- Open the ZeCircle App on your mobile device. Sign up if you are a new member or Log in with your existing account. After entering your personal information, tap Set up
- Make sure ZeCircle is nearby and select ZeCircle in the list of devices
- You will receive a pairing request on your mobile device. Press Pair to accept it
- Then, a pairing request will appear on your ZeCircle display Tap on your ZeCircle to accept the pairing
- 6. When ZeCircle is successfully paired, you will be notified on ZeCircle and on your mobile device’s screen
- You can also set up your ZeCircle using our Mac or PC software available on the MyKronoz website: http://www.mykronoz.com/support/
- System requirements: Windows 7,8, XP – Mac OS X 10.7 and above
If pairing fails, repeat the same steps. Pairing is a one-time process. If you want to pair ZeCircle with another account, you first need to unpair it from the current one. Open ZeCircle App, go to Settings > Connect ZeCircle > Unpair ZeCircle. Tap Connect ZeCircle to pair a new device
WEARING
ZeCircle is adjustable to fit different wrist sizes.
- Pop ZeCircle unit into the wristband
- Locate the vertical marking lines on the back of the ZeCircle unit and on its wristband
- Make sure the vertical marking lines are aligned with each other
- Place ZeCircle around your wrist and put the clasp pin inside the hole
- Press a few times to ensure the pin is fully inserted and that ZeCircle is securely fastened
To get the most accurate data, we recommend wearing ZeCircle on your non- dominant hand and not too loose.
DISPLAYS
ACTIVITY
ZeCircle tracks the number of steps taken, distance travelled and calories
burned throughout the day. You can view your daily activity in real-time on
ZeCircle display by tapping below the display area.
You can also monitor your activity data and history from the Activity tab of ZeCircle. On the main activity screen, you can check your performance level against your daily goals. Click on any activity bar to get a detailed graph of your daily, weekly and monthly performance.
- ZeCircle shows daily data. The activity tracker resets at midnight. To upload your latest activity data, do not forget to tap the sync icon in the upper right hand corner of ZeCircle App
SLEEP
- ZeCircle tracks the hours slept and the quality of your sleep (light sleep, deep sleep, awake times)
START / EXIT SLEEP MODE
- To start sleep mode, open ZeCircle App, tap on the bottom purple sleep bar, click on Add sleep log > Start Sleep now
- To end sleep mode, open ZeCircle App, tap on the bottom purple sleep bar, click on Add sleep log > Awake
PRESET SLEEP
- Open ZeCircle App > Go to Settings > Advanced Settings > Click on Preset sleep to enter your desired bed and wake up times. By default, ZeCircle will track your sleep from 11pm until 7am.
To upload your latest sleep data, do not forget to tap the sync icon in the upper right hand corner of ZeCircle App. If you forgot to activate sleep mode, you can manually add sleep logs in ZeCircle App. Open ZeCircle App, click on Add sleep log > Add sleep
GOALS
Tap the Goals tab of ZeCircle App to set daily goals for steps taken, distance travelled, calories burned and hours slept. Click on the sync button in the upper right corner to save your goals. On the Steps screen of your ZeCircle, a progress bar will show how close you are to your daily goal.
Once you hit one of your daily goal, ZeCircle will gently vibrate and display a Goal achieved icon
REMINDERS
Tap the Reminders tab of ZeCircle App to add daily life reminders. You can set up to 6 daily reminders, and choose the type of reminder and preferred time and day. ZeCircle will gently vibrate and display the corresponding reminder icon to alert you. A single tap on your ZeCircle can dismiss the reminder. If not dismissed, the same alert will repeat after two minutes.
NOTIFICATIONS
ZeCircle shows notifications of incoming and missed calls, SMS, email, social media activity, calendar events and anti-lost alert*. Open ZeCircle App, tap Settings > Notifications to select the notifications you want to receive onto your ZeCircle. If you wish to disable certain notifications, swipe the selection button to the left. A single tap on your ZeCircle can dismiss the notification. If not dismissed, the notification will reappear next time you wake up the screen.
Setting up notifications for iOS users:
- Go to “Settings” of your iOS device
- Tap “Notification Center”
- Select which type of notifications you wish to receive on ZeCircle
- Enable ”Show in Notification Center” to receive the notification on ZeCircle
Caller ID supports latin character only. For more languages support, please contact support@ mykronoz.com. *Windows Phones may not support those features, please contact support@mykronoz.com.for more information.
TECH SPECS
SAFETY INSTRUCTIONS
Before using the device, read these instructions carefully.
- ZeCircle has one built-in battery. Do not disassemble the battery on your own. KRONOZ LLC is not responsible for any damage or personnel injury caused by the removal of the battery or any component.
- This device is not waterproof so keep it away from all sources of heat or humidity. Do not use it near sink or other wet areas. Do not immerse the product in any liquid other than water. Do not immerse the product in salt water. Do not swim wearing this product. Do not use the product underwater.
- Charge the battery in a cool, ventilated room. Excessive temperature during charging could cause heat, smoke, fir or deformation of the battery or even explosion.
- Avoid excessive temperatures. Do not expose this device to excessive smoke, dust sand, or direct sunlight for an extended period of time.
- Do not open, crush, bend, deform, puncture or shred secondary cells or batteries. In the event of a battery break or leak, prevent battery liquid contact with skin or eyes. If this happens, immediately flush the areas with water (do not rub the eye) or seek medical help.
- Do not short-circuit. Short-circuiting can occur when a metallic object, such as coins, causes direct connection of positive and negative terminals of the battery. Short-circuiting may damage the battery.
- Do not use batteries that have been damaged or have been exhausted.
- Keep the batteries out of children’s reach and in a safe place to prevent danger.
- Do not dispose of batteries in fire as they may cause explosion. Dispose of used batteries in accordance with your local regulations (such as recycling). Do not dispose as household waste.
- Use only the USB cable supplied to charge this battery. Do not charge fo more than 24 hours.
- KRONOZ LLC is not responsible for any damage caused by improper use of the device.
REGULATORY NOTICES
USA
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
CAUTIONS
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC NOTICE
This equipment complies within the limits of a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio and TV interference in residential areas. However, even during normal operation, this equipment may cause TV or radio interference. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following corrective measures:
- Reposition the receiving antenna
- Increase the distance between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2AA7D-ZECE1
CANADA
INDUSTRY CANADA (IC) STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
EUROPEAN UNION
CE DIRECTIVE
Declaration of conformity with regard to the EU Directive 1999/5/EC. Kronoz LLC hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive 1999/5/EC. The complete declaration of conformity is available on request via our customer service:
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
©2015 Kronoz LLC, all rights reserved. Kronoz LLC, Route de Valavran 96, 1294 Genthod, Suisse All brands or product names are or may be trademarks of their respective owners. Pictures and specifications are not contractual.Les marques citées sont des marques déposées par leur fabricant respectif. Photos et caractéristiques non contractuelles. Designed in Switzerland – Made in China
© 2015 KRONOZ LLC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>