TESLONG NTG450H Rifle Borescope User Manual
- June 5, 2024
- TESLONG
Table of Contents
TESLONG NTG450H Rifle Borescope
Product Manual
Teslong NTG450H, a Rigid Rifle Borescope with a 4.5inch high definition color IPS display screen. This borescope has a 26inch rigid camera probe and a 0.2inch diameter camera, which make it easy to access into any .22 and larger caliber barrel. With a detachable side-view mirrow, users can check the wall of the rifle barrel, or remove it to check the firing point The snapshot and recording functions are supported, photos and videos can be saved on Micro-SD memory card. A WARNING: This product is not intended to use for patient in health care environments unless specifically designated.
Safety and Maintenance
- his product is a borescope camera and is not intended for medical use or human examination.
- Insert or pull out the borescope slowly and carefully to avoid damage of camera lens or barrel. Please do not violently hit the camera probe, and do not imprudently pull the cable.
- This product is not suitable for people ith limited physical, sensory or mental capabilities.
- Do NOT allow children to touch or operate this device In case the device is damaged,
- Do Not disassemble it by yourself. Please Contact the seller or the agent where you bought it to get repair service.
FUNCTIONS
- Camera probe connector.
- Snap button: Photo taking/Start video recording/End video recording
- Light control button: To adjust the the LED sbrightness of thecamera
- Up and down selection button/rotate180°
- Mode switch button: switch between three function modes: Photo taking,video recording and playback.
- Enter button: Confirm selection/freeze screen
- Settings button: enter/exit settings menu.
- Power button: Press and hold for a few seconds to turn ON/OFF.
- TF card slot
- Charing port
- Speaker
- Installation hole of Screen bracket
- Reset button
- Microphone
- Rigid Probe
- Side Viewing Mirror
- Cable
- Type C Plug
Instructions
- Press & hold the Power butto for a few second to turn ON/OFF the device.
- Pull in or pull out the Type C plug of the probe from the monitor.
- The devIce is equipped with a IF memory card(inserted). Gently press to eject the card.
Insert TF card:
- Power off device first before insert TF card.
- Make sure the direction and the front and back sides is correct when inserting the TF card.
- Do not use excessive force when inserting or removing the TF card to prevent damages of card slot structure.
How to Focus
Screw mirror in or out depending on your caliber diameter to getthe best focal distance and using lock ring to hold it in position.
For Example
- For rifle barrel with .223 caliber
- For rifle barrel with larger-caliber
Language Settings
The default language is English, and the system supports English, Chinese, German, French, Spanish, Italian, Russian, and Japanese.
Setting path:
- Press the button twice to enter setting page.
- Select second item(Language)on settings page.
- Press up and down keys to select the language you need.
- Press to save your choice.
Photo taking/Video recording/Playback
- Press to switch to the photo taking o video recording mode, and press to take a photo or start recording
- Press to switch to playback mode, pres to select photo or video to view, andress to delete photo or video
Copy photo and video files to computer
You can use a TF card reader to copy data directly or use a type-C cable to connect to a computer for copying
Charge the monitor
- Please use 5V household charger that meets safety requlations tocharge this device.
- This device can work while charging.
- If you do not use the device for a long time, make sure to charge it at least once every 3 months to prevent irreparable damage caused by excesSIve battery discharge.
Specification Parameters
Monitor
- Screen: 4.5inch IPS Color HD Screen
- Screen Resolution: 854×480 (Pixels)
- Image Capturing Resolution: 1920×1 080,
- Video Recording Resolution: 1920×1080, 1280×720
- Port: Type-C charging port, TF memory card slot
Probe
- Diameter: 0.2inch
- Probe Length: 26inch
- Resolution: 1.0 Megapixel HD
- Viewing angle: 70°
- Depth of Field: 0.4-0.8inch
- Light Source: 6 adjustable high-intensity LEDs
Others
- Operating Temperature: 32° Fto 113° F (0° C to 45° C)
- Power Source: 2500mAh Lithium Battery
- Max Battery Life: 3~4 hours
- Charging Time:3-4 hours
Packaging
- 4.5inch IPS Monitor
- Rigid Rifle Borescope Probe
- Side-View Mirrors
- Type-C Charging cable
- Screen Bracket
- User Manual
Customer Service
- Please contact us if you have any questions,
- We love to hear from you www.teslong.com
- 877-899-8809
- support@teslong.com