AMCREST AL-PIRSEN1 Motion Sensor User Guide

: June 6, 2024
: Amcrest

Table of Contents

AMCREST AL-PIRSEN1 Motion Sensor
What’s Included?
Overview
Specifications
LED Behavior
Pairing the Sensor
Installing the Motion Sensor
Install Using the Mounting Bracket
Changing the Battery
Documents / Resources

AMCREST AL-PIRSEN1 Motion Sensor

What’s Included?

May include one or more depending on the package purchased. To purchase additional sensors, visit us at amcrest.com

Overview

Specifications

Environment	Indoor
Max Detection Distance	26 feet
Max Detection Angle	110°
Operating Temperature	14°F ~ 113°F
Operating Humidity	0-95% RH
Battery Type	CR2450
Protocol	Bluetooth 5.0

LED Behavior

Please refer to the table below for details regarding the LED behavior of the device

Behavior	Description
Flashing Rapidly	Sensor is pairing.
Solid (for 2 seconds)	Pairing successful
Flashing (3 times)	Pairing failed.

**Try repeating setup.

Flashing Rapidly (after pairing)| ****

Alarm has been triggered after

Steady Flash

| ****

Firmware upgrade is in progress.

Pairing the Sensor

Locate the Alarm Hub on the main menu.
Tap on the “+” icon to pair the sensor to the hub.
Follow the on-screen prompts to finish setting up the sensor.

Note: Once the sensor has been successfully paired, please begin the physical installation.

Installing the Motion Sensor

Location tips:

Install the motion sensor indoors on a flat surface.
The motion sensor should be placed 6 to 8 feet high to keep it from falling and out of reach of children or pets.
To detect smaller objects, it is recommended to use one of the angled sides of the bracket.

Install Using the Mounting Bracket

The bracket offers two separate angles for the sensor to face. Use the included two-sided mounting adhesive to install the sensor to the bracket.

Peel the other portion of the circular mounting adhesive and adhere it to the back of the bracket.
Peel the other portion of the circular mounting adhesive and adhere it to the back of the bracket.
Place another mounting adhesive to the bracket to achieve the desired angle.
Peel the other portion of the mounting adhesive and place the bracket onto a flat surface.

Changing the Battery

The sensor uses a CR2450 cell-type battery. The battery typically lasts up to one year before it needs to be replaced.
Note: For more information on this and other products visit: amcrest.com/support

Make sure that the alarm hub is disarmed before changing the battery.
Use the wide portion of the pin to open the sensor from the battery slot.
Slide the old battery out of the sensor and replace it with a new battery.
Snap the top portion of the sensor into place and secure it to the bottom portion of the sensor

How can we help?
We are dedicated to providing the highest quality support to our customers and are available 7 days a week

We’d Love to Hear From You!

We wanted to personally reach out and thank you for purchasing from our Amazon store. Selling on Amazon is what we do to support our family, and product reviews are the lifeblood of our business. It would mean the world to us if you could take one minute of your time to help share the love by leaving us an honest review using the link below:

LINK