singing machine iSM9010 WiFi Touch Screen Karaoke System Instruction Manual
- June 12, 2024
- Singing Machine
Table of Contents
singing machine iSM9010 WiFi Touch Screen Karaoke System
Product Information
- Product Name: iSM9010
- Manufacturer: Singing Machine
- Website: www.singingmachine.com
Product Usage Instructions
Warnings
- RISK OF ELECTRIC SHOCK DO NOT OPEN. Do not remove the cover (or back) of the product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
- Dripping Warning: The product should not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, should be placed on the product.
- Ventilation Warning: The normal ventilation of the product should not be impeded for intended use.
- FCC Warning: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless expressly approved in the instruction manual. Unauthorized changes or modifications can result in loss of authority to operate the equipment.
- Electric Shock and Fire Hazard Warning: Match the wide blade of the plug to the wide slot and fully insert. Do not expose this unit to rain or moisture.
- RF Exposure Warning Statements: This equipment complies with FCC radiation exposure limits. It should be installed and operated with a minimum distance of 20cm between the radiator and body.
Important Safety Information
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all Instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any of the ventilation openings. Install in accordance with the Manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When using a cart, exercise caution to avoid tip-over injuries.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
www.singingmachine.com
The Singing Machine® is a registered trademark of The Singing Machine Co.,
Inc. The Singing Machine® es marca registrada de The Singing Machine Co., Inc.
The Singing Machine® est une marque déposée de The Singing Machine Co., Inc.
Warnings
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying this
product.
DRIPPING WARNING: This product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be
impeded for intended use.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
FCC WARNING : This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the rear of the unit.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Important Safety Information
- Read these Instructions.
- Keep these Instructions.
- Heed all Warnings.
- Follow all Instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any of the ventilation openings. Install in accordance with the Manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with water, such as a vase, on the apparatus.
- The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use. In order to completely disconnect the apparatus from power, the mains plug should be completely removed from the AC outlet socket.
- CAUTION: To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine, fire or other heat sources.
Included
Please make sure that the following items are included.
Location of Controls (Top)
- Touch Screen
- (LIGHTS) Button
- (BACK) Button
- (HOME) Button
- Power indicator
- (ON/STANDBY) Button
- RECORD Button
- Speaker
- SKIP Button
- SKIP Button
- USB Port
- (PLAY/PAUSE/ENTER) button
- (VOICE EFFECTS) Button
- VOLUME/ EFFECTS Control
Location of Controls
- Mic 1 Jack
- Mic 2 Jack
- Aux In Jack
- Line Out Jack
- Reset hole
- HDMI Jack (Video only)
- DC IN Jack
- Wireless Mic holders
- Handles
- Power indicator
- ON/MUTE/OFF switch
- Battery compartment
Connections
Connecting to AC Power
- Insert the DC plug of the adapter into the DC IN Jack located on the main unit.
- Insert the AC adapter into a conveniently located AC outlet having 120V AC, 60Hz.
- Secure the power cord into the pre-installed Power Cord Clamps.
NOTE:
- Make all connections prior to plugging the AC adaptor into a power outlet.
- The AC adaptor has a polarized plug that fits into the AC outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force and do not file or cut the wide blade.
Connecting the Unit to a TV
zThe video and lyrics will be displayed on the built-in screen. You may
also want to connect a TV to display a larger image (follow the steps below):
Plug the HDMI cable (not included) into the HDMI Jack on the back of the unit.
Plug the other end of the HDMI cable into the HDMI input on your TV.
NOTES:
- This unit can be used with or without a TV.
- Also refer to the TV’s or external unit’s User Guide.
- Audio and mic input cannot be output to your TV.
Changing the Wireless Microphone’s Battery
When the wireless mic batteries are low the battery indicator will flash.
Change the batteries as follows:
- Slide the battery door in the direction the arrow indicate to reveal the battery compartment.
- Replace the batteries with 2 x “AAA” size/LR03 battery (not included).
- Replace cover tightly before operating.
Battery Precautions
The precautions below should be followed when using batteries in this device:
- Use only the size and type of batteries specified.
- Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
- Do not mix different types of batteries together (e.g. Alkaline and Carbon Zinc) or old batteries with fresh ones.
- If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
- Do not try to recharge batteries not intended to be recharged, they can overheat and rupture. (Follow battery manufacturer’s directions.)
- Rechargeable batteries are to be removed from the product before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Exhausted batteries are to be removed from the product.
- Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Connecting the Wireless Microphone(s)
Slide the Wireless Mic’s ON/MUTE/OFF switch to the ON position. The Mic
power indicator v will light solid.
NOTES:
- Working distance of up to 66 feet/20 meters in open space.
- If there is no audio input for 15 minutes, the wireless mics connection will automatically turn off. Press and rotate the VOLUME/EFFECTS control to reactivate the connection.
- Sliding the switch to MUTE will temporarily stop the microphone input.
Connecting the Microphone(s)
Connect the wired microphone (not included) into Mic jack u or v (when
desired).
NOTE: Maximum of two microphones (wired or wireless) can be connected to
the unit at one time. After inserting the wired microphone (Mic 3), the
wireless microphone 1 (Mic 1) will be turned off automatically. 
Connecting to Line Out Jack
This unit can be connected to another audio system for greater audio output
via 3.5mm AUX cord (not included).
Plug one end of AUX cord into the LINE OUT jack located on the rear of the
machine.
Plug the other end of the AUX cord into the Line In jack on your separate
audio device. You may need to refer the instructions of your separate audio
device for more details.
Energy Saving (Auto Power System-APS)
This unit will automatically turn to Screen Saver mode after 15 minutes of
inactivity, and automatically turn off after 10 minutes. The unit can be
powered back on by pressing the (ON/STANDBY) button once. APS is for energy
saving purposes.
NOTE: You can change the energy saving setting in the Screensave option,
see the section of Wi-Fi & setting.
Operation
Wi-Fi & Settings
-
Connect the unit as described previously. Press the button to turn the unit on. The set up Wi-Fi connection window will pop up. Select CONTINUE on the touch screen.
-
Select your Wi-Fi network using the touch screen.
-
Use the keyboard on the touch screen to enter your Wi-Fi password and press the ENTER button. “Connected” will appear if the connection is successful.
If unsuccessful, check your password and Wi-Fi frequency and re-connect.
-
You can always change the Wi-Fi network, by selecting the SETTINGS icon on the touch screen to enter Wi-Fi settings mode.
-
Select WIFI and connect as previously described, if you want to connect to another network.
-
To adjust the language, brightness, sleep time, HDMI, screen, time setting and screensave select DISPLAY.
-
Select ABOUT US to check the current version and serial number of this unit.
-
Select RESET to reset this unit to factory settings.
-
Select UPDATE to set the date and time.
-
Select HOME to go to main menu.
Accessing the Singing Machine Karaoke Catalog
- Select Singing Machine Karaoke to enter Singing Machine Karaoke Store page.
- Select “Sign up” and follow the on screen instructions to register your machine.
- After signing up, select “Log In” to log into your account. Select Singing Machine Karaoke at home screen to go to the Singing Machine Karaoke Store home screen directly.
- Select your favorite songs using the touch screen to playback.
Applications
- Selecting APPLICATIONS displays all built-in applications.
Other icons on the touch screen
-
Select BLUETOOTH to enter the bluetooth mode.
NOTE: The unit automatically searches for and pairs a previously paired Bluetooth device (if previously paired).
-
Select LINE-IN to enter the line in mode.
NOTE: It must have been connected to this unit and your audio device using a 3.5mm AUX cable (not included).
-
Select MEDIA to play internal or USB recorded music.
NOTE:
If you want to play USB recorded music, please insert the USB flash drive into the USB port of this unit.
Control Keys
-
Connect the unit as described previously. Press the button to turn the unit on. The touch screen will turn on.
NOTE: If the Wi-Fi network is not connected in this unit, the Wi-Fi connection window will pop up.
-
RECORD YOUR SINGING PERFORMANCE
During music playback, press the REC button to record your singing and the music. Recording will begin and the recording indicator will appear on-screen.
When done recording, press the REC button again.
NOTES:- You can save the recorded vocals and music to the built-in memory or USB flash drive.
- If the recorded audio files will be recorded on a USB drive, Insert a USB flash drive into the USB port on the unit.
-
There are 9 built-in light modes. Repeatedly press button to switch between lighting effects.
-
Press the button repeatedly or press the button once and turn the VOLUME/EFFECTS control to select a sound effect.
-
Press the button to play the song or enter the mode/folder. Press the button during playback to pause the song. Advance or go back one track by pressing the or button.
-
Press home button to go to the menu screen while in any mode or screen.
-
Press the ← button to go back to the previous screen.
-
Press the VOLUME/EFFECTS control key; the MUSIC VOLUME, MIC VOLUME and ECHO VOLUME level list appear on the touch screen. Select the list you want to adjust, then turn the VOLUME/EFFECTS control or use the touchscreen to adjust
NOTE: Mic volume to adjust the volume of both microphones.
Record songs
-
During music playback, press the REC button to record your singing and the music. A timer will appear on the screen.
-
Press the REC button again to stop recording. A box will pop up to choose Delete or Save.
-
If selected Save the rename box and save box will pop up.
NOTES:- You can save the recorded vocals and music to the built-in memory or USB flash drive.
- If the recorded audio files will be recorded on a USB drive, Insert a USB flash drive into the USB port on the unit.
Using a Bluetooth Device
-
Connect the unit as described previously. Press the button to turn the unit on.
-
Select BLUETOOTH to enter the bluetooth mode.
-
Turn on your device’s Bluetooth option in settings to search for a discoverable device with a Bluetooth signal. Select “SINGING MACHINE” from the device results on the Bluetooth menu.
NOTE: Also refer to the user manual of your Bluetooth device for detailed instructions. -
The screen will show that your Bluetooth device is connected.
NOTES:- If your Bluetooth prompts you for a passcode during the pairing process, please enter “0000” to connect.
- On some Bluetooth devices, once pairing is complete, select your Bluetooth device as “Use as Audio Device” or similar.
- If connection is lost after successful pairing, check to make sure the distance between speaker and Bluetooth enabled device does not exceed 30 feet/10 meters.
-
To control your Bluetooth device from this unit, press the button to start playback (music app must be open). Press the button during playback to pause the song.
-
SKIP: Advance or go back one track by pressing the or button.
-
Press Disconnect Device to disconnect the bluetooth connection.
-
To sing without the lead singer on the recording, press the Vocal
Fader OFF. To resume the lead singer, press Vocal Fader ON.
NOTE: Lead vocal removal might work better on some songs than others.
Using the LINE IN Jack
-
Connect the unit as described previously. Press the button to turn the unit on.
-
Connect the external device by using an appropriate cable (3.5mm audio cable not included) to the LINE IN Jack on the rear of this unit as previous described. Connecting an external unit will allow the audio to be played through your Singing Machine.
NOTES:- It is highly recommended to set the volume on the auxiliary unit to 1/3 or lower to avoid distortion.
- Skipping files/tracks is not possible on this unit when using an external device.
-
Select LINE IN to enter the line in mode.
Playing Songs from the Recorded Files
-
Connect the unit as described previously. Press the button to turn the unit on.
-
Select MEDIA to enter.
-
Press USB or RECORDINGS to choose your desired playlist.
NOTE: If the audio file to be played is recorded on a USB flash drive, please insert the USB flash drive into the USB port of this unit.
-
Use the touch screen or the or button to select a recorded audio file from the song list. Press once on touch screen or to start playing the audio file. Press ▶ on the touch screen or on the control panel buttons during playback to pause the file.
NOTE: To delete a file, press and hold the file on the touch screen.
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service: No Power
- Power is not on; press the button to turn power on.
- Confirm that the AC adapter is connected securely to the rear of the unit.
- Connect the unit to a different outlet.
- The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply restart the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location.
No Sound – General
- Music Volume is set to minimum; raise volume.
- If using an external device, raise the volume.
No sound from the microphone
-
Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack.
-
Make sure the mic’s ON/OFF switch is set to the ON position.
-
Make sure the MIC VOLUME/ECHO control is not set too low.
File(s) on USB jack not playing -
The file is corrupted; replace the file.
-
The file is not in a format this unit will play.
-
The connected USB device is not supported by the product.
The Bluetooth device cannot be paired or connected with the unit
- Ensure any other Bluetooth devices are turned off to avoid accidental pairing.
- You have not activated the Bluetooth function of your device; see page E16 or refer to the Bluetooth device user’s manual.
- The system is not in pairing mode; press and hold the button to restart pairing.
The Music is not available on the unit after successfully connecting the Bluetooth
- Ensure your Bluetooth device can support the A2DP Bluetooth profile.
- The volume on the external Bluetooth device is set too low or muted; raise as desired. The unit will not record
- No USB drive inserted or the USB drive is full. Move all recordings to your computer to make room.
Failed to connect to the Wi-Fi network
- The unit is not within the Wi-Fi signal range.
- Ensure the unit’s Wi-Fi signal has NOT been turned off.
- Ensure you have entered the correct password.
- WPA3 security settings can cause connection issues. If you have WPA3 security, we recommend lowering to WPA2 or lower. Or contact us for further help.
Specifications
AUDIO
Output Power…………………………………………………………………………………………………. 25 Watts (RMS)
BLUETOOTH .
Working Distance…………………………………….Up to 30 feet/10 meters measured in open space
USB
Format……………………………………………………………………………………………………………………………….FAT32
Maximum Compatibility…………………………………………………………………………………………………….32GB
Wi-Fi frequency ………………………………………………………………………………………………… 2.4GHz/5GHz
GENERAL
Power………………………………………………………………………………………………………100-240V, 50-60Hz
Output ……………………………………………………………………………………. 15VDC 1.5A Positive Center
Dimensions – Main Unit ………………………. 18.7 x 18.7 x 36.7 inches (47.5 x 47.5 x
93.2cm)
Weight – Main Unit………………………………………………………………………………………….. 8.6Lbs (3.9kgs)
Microphone…………………… -78 dB 600 Ohms impedance with 6.3 mm Dynamic Microphone
Line In…………………………………………………………………………………………………………..3.5mm Stereo Jack
Line Out ………………………………………………………………………………………………………3.5mm Stereo Jack
Internal memory …………………………………………………………………………………….. 1GB RAM, 8GB flash
Specifications are subject to change without notice.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks and lo-gos by The Singing Machine Company, Inc. is under license. Other trademarks and trade names are those of their respective owners.
Visit Our Website: www.singingmachine.com
Copyright © 2023 All Rights Reserved.
U.S. Representative
Company Name : The Singing Machine Company, Inc.
Address : 6301 NW 5th Way, Suite 2900, Fort Lauderdale,
Florida, 33309 United States
Telephone : 954 -596-1000
Website : www.singingmachine.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>