Cuisinart CPT-160 Metal Classic 2-Slice Toaster User Manual

Cuisinart CPT-160 Metal Classic 2-Slice Toaster

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic safety precautions should always be followed, including the following:

1. Read all instructions.

2. Do not touch hot surfaces. Use handles or knobs.

3. To protect against electrical shock, do not place any part of the toaster in water or other liquid. See instructions for cleaning.

4. Close supervision is necessary when any appliance is used by or near children.

5. Always unplug from the outlet when not in use and before cleaning. Allow cooling before cleaning or handling.

6. Do not operate any appliance with a damaged cord or plug, or after the appliance has malfunctioned or has been dropped or damaged in any way, or if it is not operating properly. Return the toaster to the nearest Cuisinart Repair Center for examination, repair, or mechanical or electrical adjustment.

7. The use of accessory attachments not recommended by Cuisinart may cause injury.

8. Do not use outdoors.

9. Do not let the cord hang over the edge of the table or countertop or touch hot surfaces.

10. Do not place the toaster on or near a hot gas or electric burner or in a heated oven.

11. Do not use this toaster for other than intended use.

12. Oversize foods, metal foil packages, or utensils must not be inserted in the toaster, as they may involve a risk of fire or electric shock.

13. A fire may occur if the toaster is covered or touching flammable materials, such as curtains, draperies, or walls when in operation. Do not operate under
    wall cabinets.

14. Do not attempt to dislodge food when the toaster is plugged into an electrical outlet.

15. To avoid the possibility of fire, do not leave the toaster unattended during use.

16. Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, push the cancel button, then remove the plug from the wall.

17. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY SPECIAL CORD SET INSTRUCTIONS

A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. Longer extension cords are available and may be used if care is exercised in their use.

If a long extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and the longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
NOTICE: This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

FEATURES AND BENEFITS

1. Dual Toasting Slots
   1½-inch slot toasts a wide variety of bread.

2. Extra-Lift Carriage Control Lever
   Brings the toast close to the top of the toaster, making it easy to remove the smallest items.

3. Browning Control
   Sets desired toast color from light to dark, with six browning levels.

4. Bagel Button
   Adds extra time to the toasting cycle. LED lights when selected.

5. Defrost Button
   Defrosts and toast frozen bread. LED lights when selected.

6. Reheat Button
   Reheats without browning or toasting. LED lights when selected.

7. Cancel Button
   Interrupts the toasting process.

8. Slide-out Crumb Tray (not shown)
   Pulls out to clean crumbs that collect in the bottom of the toaster.

9. Cord Storage (not shown)
   Takes up excess cord and keeps countertop neat.

10. BPA-Free (not shown)
    All parts that come in contact with food are BPA-Free.

USE AND CARE

Unwind the power cord. Check that the crumb tray is in place and that there is nothing in the toaster slot. Plug the power cord into the wall outlet.

1. Insert Slice(s) of Bread.
   Be sure that multiple slices do not overlap and that the carriage is in the up position.

2. Set the Browning Control.
   Turn the rotary dial to the desired position:
   Dial Setting  Color
   1-2                  light
   3-4                  medium
   5-6                  dark

3. To Begin Toasting
   Press the carriage lever until it locks into the down position.

4. To Stop Toasting
   When the toasting cycle is finished, the toast will be raised. If you wish to stop the cycle before it is finished, simply press the “Cancel” button.

Some notes on browning:

Toasting is a combination of cooking and drying the bread. Therefore, differences in moisture level from one bread to another can result in varying toasting times.

• For slightly dry bread, use a lower setting than you normally would.
• For very fresh bread or whole wheat bread, use a higher setting than normal.
• Bread with very uneven surfaces (such as English muffins) will require a higher toast setting.
• Thickly cut pieces of bread (including bagels) will take longer to toast, sometimes significantly longer since more moisture must be evaporated from the bread before toasting can occur. Very thick pieces may require two cycles.
• When toasting raisins or other fruit bread, remove any loose raisins, etc. from the surface of the bread before placing it into the toaster. This will help prevent fruit pieces from falling into the toaster or sticking on the guide wires in the slot.
• Before toasting the bagels, slice each bagel into two equal halves.

Single Slice Toasting: If you are toasting a single slice of bread, set the heat selector to a lighter setting than you normally would. The toaster is designed to heat the whole toasting chamber for two slices. By lowering the heat for a single slice, you won’t over toast.

Notes on Specialty Uses: The following bread and pastries should be warmed using the  “Defrost” button: Frozen Waffles, Pancakes, French Toast, and Frozen Bagels

Toaster pastries: Exercise caution with toaster pastries; the filling can become quite hot, long before the surface of the pastry becomes browned. Never leave toaster pastries unattended while toasting or warming.

Tips:

• Never force foods into the toasting slot. Foods should fit freely between the guide wires.
• Do not place buttered bread or pastries with fillings or frostings in the toaster, as this could create a fire hazard.
• Uneven toasting is usually due to bread slices of uneven thickness.
• After use, unplug your toaster from the electrical outlet.

Defrost Button

The “Defrost” button is designed to first defrost and then toast the bread, which extends the toasting cycle slightly.

1. Insert slice(s) of bread.
   Be sure that multiple slices do not overlap and that the carriage is in the up position.

2. Set the Browning Control.
   Setting 1-2:
   For refrigerated bread and thinner frozen items such as frozen pancakes.
   Setting 3-4:
   For toaster pastries, frozen waffles and (thin) French toast, and refrigerated bagels.
   Setting 5-6:
   For thicker frozen items such as bagels, hand-cut bread, and thick French toast.

3. Press the Carriage control lever until it locks into position.

4. Press the “Defrost” button. Red LED indicates the feature is activated.

To stop the cycle:

When the defrost cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply press the “Cancel” button to interrupt.
After use, unplug the toaster from the electrical outlet.

Reheat Button

The reheat feature allows you to reheat bread without browning or toasting.

1. Insert slice(s) of bread. Be sure that multiple slices do not overlap and that the carriage is in the up position.
2. Press the carriage control lever until it locks into position.
3. Press the “Reheat” button. Red LED indicates the feature is activated.

To stop the cycle:

When the reheat cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply press the cancel button to interrupt.

Bagel Button

The bagel feature adds extra time to the toasting cycle to allow for thicker bread.

1. Insert slice(s) of bread. Be sure that multiple slices do not overlap and that the carriage is in the up position.
2. Press the carriage control lever until it locks into position.
3. Press the “Bagel” button. Red LED indicates the feature is activated.
   When the bagel cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply press the cancel button to interrupt.

CLEANING AND MAINTENANCE

Always allow the toaster to cool completely before cleaning.

1. Always unplug the toaster from the electrical outlet.
2. Do not use abrasive cleaners. Simply wipe the exterior with a clean damp cloth and dry thoroughly. Apply any cleansing agent to a cloth, not to the toaster, before cleaning.
3. To remove crumbs, slide out the crumb tray and discard the crumbs. Wipe clean and replace. Never operate the toaster ` without the crumb tray in place.
4. To remove any pieces of bread remaining in the toaster, turn the toaster upside down and gently shake. Never insert any hard or sharp instruments into the slot, as this could damage the toaster and cause a safety hazard.
5. Never wrap the cord around the outside of the toaster. Use the cord storage cleats on the underside of the toaster.
6. Any other servicing should be performed by an authorized service representative.

CUISINART® METAL CLASSIC 2-SLICE TOASTER LIMITED 3-YEAR WARRANTY

This limited warranty is available to consumers only. You are a consumer if you own a Cuisinart® Toaster which was purchased at retail for personal, family or household use. Except as otherwise required under applicable state law, this warranty is not available to retailers or other commercial purchasers or owners.
We warrant that your Cuisinart® Toaster will be free of defects in materials and workmanship under normal home use for three years from the original date of purchase.
We recommend that you visit our website, www.cuisinart.com for a fast, efficient way to complete your product registration. However, product registration does not eliminate the need for the consumer to maintain the original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for purposes of this warranty will be the date of manufacture. If your toaster should prove to be defective within the warranty period, we will repair or replace it at our option, without charge to you. To obtain warranty service, simply send the defective product to Cuisinart, 7811 North Glen Harbor Blvd. Glendale, AZ 85307., or call our Consumer Service Center toll-free at 1-800-726-0190.

To facilitate the speed and accuracy of your return, please also enclose $7.00 for shipping and handling of the product. CA residents need only provide proof of purchase and should call 1-800-726-0190 for shipping instructions. Please be sure to include a return address, description of the product defect, product serial number, and any other information pertinent to the product’s return. Please pay by check or money order. Your Cuisinart® Toaster has been manufactured to the strictest specifications and has been designed for use with authorized Cuisinart® accessories and replacement parts.

THIS WARRANTY EXPRESSLY EXCLUDES ANY DEFECTS OR DAMAGES CAUSED BY ACCESSORIES, REPLACEMENT PARTS, OR REPAIR SERVICES OTHER THAN THOSE WHICH HAVE BEEN AUTHORIZED BY CUISINART. THIS LIMITED WARRANTY DOES NOT COVER ANY DAMAGE CAUSED BY ACCIDENT, MISUSE, SHIPMENT, OR OTHER THAN ORDINARY HOUSEHOLD USE. THIS WARRANTY EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of these damages, so these exclusions may not apply to you. ALL APPLICABLE IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, GIVEN TO YOU BY LAW, ARE HEREBY LIMITED IN DURATION TO THIS WARRANTY.
This warranty gives you specific legal rights and you may have other rights which vary from state to state. If you have any questions about the safety features of your Cuisinart® Toaster, please call us, toll-free, at 1-800-726-0190.

BEFORE RETURNING YOUR CUISINART PRODUCT

If you are experiencing problems with your Cuisinart product, we suggest that you call our Consumer Service Center at 1-800-726-0190 before returning the product for servicing. Often, our Consumer Service Representatives can help solve the problem without having the product serviced. If servicing is needed, a representative can confirm whether the product is under warranty and direct you to the nearest service location. *Important: If the nonconforming product is to be serviced by someone other than Cuisinart’s Authorized Service Center, please remind the Servicer to call our Consumer Service Center at 1-800-726-0190 to ensure that the problem is properly diagnosed, the product is serviced with the correct parts, and the product is still under warranty.

CALIFORNIA RESIDENTS ONLY

California law provides that for In-Warranty Service, California residents have the option of returning a nonconforming product (A) to the store where it was purchased or (B) to another retail store that sells Cuisinart products of the same type. The retail store shall then decide to either repair the product, refer the consumer to an independent repair facility, replace the product, or refund the purchase price less the amount directly attributable to the consumer’s prior usage of the product. If either of the above two options does not result in the appropriate relief to the consumer, the consumer may then take the product to an independent repair facility if service or repair can be economically accomplished. Cuisinart and not the consumer will be responsible for the reasonable cost of such service, repair, replacement, or refund for nonconforming products under warranty.

California residents may also, according to their preference, return nonconforming products directly to Cuisinart for repair or, if necessary, replacement, by calling our Consumer Service Center toll-free at 800-726-0190. Cuisinart will be responsible for the cost of the repair, replacement, shipping, and handling of such nonconforming
products under Warranty.

FAQs

What is the difference between the Cuisinart CPT-160 and CPT-440 Metal Classic 2-Slice Toaster?****

The CPT-440 has a bagel button, a cancel button, and a defrost button. The CPT-160 does not have these features.

How do I clean the crumb tray?****

You can remove the crumb tray by pulling it out of the toaster. You can then use any type of brush or vacuum to clean it out.

What metal is used in toasters?****

Nichrome is an alloy that combines Nickel, Chromium, and iron. Since nichrome is high heat and high-temperature oxidation resistance, it is used in building toasters, soldering iron, hair dryers, and electric ovens.

How long will a toaster last?****

While toasters can range in price and features, most toasters have an average lifespan of six to eight years. You can extend the life of your appliance by cleaning it regularly to remove excess breadcrumbs and additional food particles.

How is a metal toaster made?****

The toaster is manufactured using several different processes. The main two processes used is injection molding and stamping. Extrusion, deep draw methods, and a hydraulic press were also used. The case, bottom, and user interface of the toaster were all injection molded.

Can you use metal utensils for the toaster?****

Never use metal utensils to lift food from the toaster or to free jammed food. Unplug the toaster and allow it to cool, then carefully use rubber or plastic tongs to remove items that cannot otherwise be retrieved.

What is the best temperature for a toaster?****

Keep a ruler nearby because you’ll want to measure the thickness of the bread, which should be 14 millimeters or 0.551181 inches. Set the toaster to produce a temperature of 309 degrees.

What happens if a toaster is left on?****

Sometimes, toasters can catch fire with no warning, so it’s best if you don’t leave it alone while it’s in use. Also, it’s a good rule to unplug your toaster when you’re not using it, even it it’s brand new, just to be on the safe side. If your toaster ever does flare up, unplug it right away.

What is the maintenance of a toaster?****

Apart from the after-use, you should also deep clean the toaster once a month by using all the important stuff. Brush Out Crumb Tray Once a Week: Remove your toaster’s crumb tray once a week and brush off all the dirt and crumbs. Wipe the Exterior Every day: This thing is necessary to do on a daily basis.

How hot does a 2 slice toaster get?****

The heating element inside a toaster is a nickel-chromium alloy. The electrical current that runs through it heats it to make it red hot, with a temperature of 1,100°F to 1,200°F (519°C to 566°C).

Video – Product Overview

Download The PDF Link; Cuisinart Metal Classic 2-Slice Toaster PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>