milwaukee ML-LED Lumens Focusing Flashlight Instructions

June 3, 2024
Milwaukee

milwaukee ML-LED Lumens Focusing Flashlight Instructions
milwaukee ML-LED Lumens Focusing Flashlight

INSTALLATION

INSTALLATION
INSTALLATION

INSTALLATION

TECHNICAL DATA

Rated Power input: . 4 W
Lighting time: 5 h
Mode High: 18 h
Luminus fl ux
Mode High: 325 lm
Mode Low:  25 lm
Colour rendering index (CRI):  80
Colour temperature: 4000 K
Battery voltage: 4,5 V (3×1,5V)
Battery type: LR03 / AAA
Weight according EPTA-Procedure 01/2014: 0,13 kg
Protection class: IP 67

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS BATTERY LAMP

Warning: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss. Don‘t use this tool in wet areas . The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced

SAFETY INSTRUCTIONS BATTERY

This tool is designed to be powered by 3 LR03 / AAA batteries properly inserted into the instrument. Do not attempt to use with any other voltage or power supply. Do not leave batteries within the reach of children.

Do not mix new and used batteries. Do not mix brands (or types within brands) of batteries. Do not mix rechargeable and non-rechargeable batteries. Install batteries according to polarity (+ / –) diagrams. Properly dispose of used batteries immediately. Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.

SPECIFIED CONDITIONS OF USE

The Battery Lamp is intended to be used light independent use away from mains supply. Do not use this product in any other way as stated for normal use

MAINTENANCE

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany

SYMBOLS

CAUTION! WARNING! DANGER!

Please read the instructions carefully before starting the machine.

Do not stare at the operating light source.

Class III electrical protection.

SYMBOLS Do not dispose electric tools, batteries/ rechargeable batteries together with household waste material. Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.

European Conformity Mark

British Confomity Mark

Ukraine Conformity Mark

EurAsian Conformity Mark

Copyright 2020 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden
Germany +49 (0) 7195-12-0
www.milwaukeetool.eu

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals