DENVER Wireless Kids Headphones Blue Instruction Manual

DENVER® BTH-150 BLUE INSTRUCTION MANUAL

facebook.com/denverelectronics

Congratulations on your purchase and thank you for your use of our Bluetooth headset. In order to start quickly, please read the user guide carefully.

Caution

1. Please turn off the headset and put it into box to avoid damage, scratches or bracket deformation when long time no use. In order to prolong the battery service life, please charge every 6 months.
2. Please charge at first if the headset is left unused for long time.
3. The battery of headset is original and please don’t change it by yourself.
4. Please keep the headset under dry place.
5. Please don’t put this product into the environment with temperature over than 60¥ or into fire to avoid battery blast accident.
6. Please don’t bend or twist the bracket to avoid deformation.
7. Please don’t tear down ear-cushions by un-professional person.
8. Don’t adjust the volume to a very high level and continued play. If tinnitus occurs, please turn the volume down or stop playing, do not turn the volume up suddenly. Please slowly turn up the volume to avoid hearing damage caused by high volume.
9. Do not use the headset in dangerous place or place where cannot hear the outside sound.

Included:

The headset contains the following parts:
Bluetooth Headset 1
Manual 1
2.5mm – 3.5mm audio Cable 1
Micro USB Charging Cable 1

Switch On: Press and hold the MFB about 3 seconds. There will be a warning tone and the blue light is on. The headset enters Bluetooth paring mode automatically, and the blue & red indicator light starts to flash alternately and quickly.

Switch Off: Press and hold the MFB about 3 seconds.

Calls: Quick Press MFB to answer a call; Press and Hold MFB to reject or end a call; Quick press MFB twice to redial previous number;

Change the song: Short press +/- button.

Adjust the volume: Long press +/- button. When the max volume is reached the headphones will indicate with a beep tone.

Pairing:

1. Ensure that your phone or Bluetooth device is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the blue & red indicator light starts to flash alternately and quickly. To pair the headset if it has been previously paired with another device, ensure that the previously paired devise is switched off.
3. Activate the Bluetooth feature on your phone or Bluetooth devices, and set it to search for Bluetooth devices.
4. Select “Denver BTH-150” from the list of found devices on your phone or Bluetooth devices.
5. When successfully connected, the blue light turns to continuously lighting.

Note: The headset that has been previously paired with another device will automatically connect with the device if the device is power on and within connecting range, if not, the headset will enter standby mode with blue light.

Charge the Battery:

Plug the Micro USB cable into the USB charging socket of headphone and plug the other end into a USB port on your computer or other devices made for USB charging. The indicator light will be red while charging. Once fully charged, the indicator light will be Blue.

Low Battery Warning:
When battery voltage is lower than 3.2V under power on condition, there will be a warning beep every 15 seconds.

Power-Off under Low Battery Condition:
When battery voltage is lower than 3.0V under power on condition, the headset will switch off automatically.

Application:

Denver BTH-150 can make and receive calls hands-free with your compatible mobile phone and listen to music from a compatible Bluetooth device, but they should be within 15 meters (49 feet) without barrier The headset is compliant with the Bluetooth Specification 5.0 and supports the following profiles: Headset Profile (HSP) , Hands-free Profile (HFP) , Advanced Audio Distribution Profile (A2DP) , and Audio Video Remote Control Profile (AVRCP)

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environ- ment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type DENVER BTH-150 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address.

Please enter: www.denver-electronics.com and then click the search ICON on topline of website. Write model number: BTH-150

Now enter product page, and red directive is found under downloads/other downloads.

Operating Frequency Range: 2402-2480MHz
Max Output Power: 14dBm
Warning Lithium battery inside

DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
facebook.com/denverelectronics

References

• Denver A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>