nedis Smart Extension Socket User Guide
- June 7, 2024
- nedis
Table of Contents
**nedis Smart Extension Socket User Guide
WIFIP311FWT**
- Power Button
- Switch Ports
Smart Extension Socket
Description
-
On/off button
Reset button -
Status indicator
Use
-
Download and install the app “Nedis SmartLife“ from Apple App Store or Google Play Store on your mobile device.
-
Launch the app “Nedis SmartLife“.
-
Create a new account or log in to your existing account.
-
Tap “+” to add the device.
-
Select “Smart Plug” from the list of products.
-
Plug in the smart extension socket.
-
If the Reset button does not flash: Press and hold the reset button for 6 seconds.
If theReset button flashes: Confirm in the app. -
Confrm the Wi-Fi network and password.
-
Enter the device name.
Note: The device name will also be used by Amazon Alexa and Google Home.
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- Do not expose the product to water or moisture.
- Do not touch the device with wet hands.
Cleaning and maintenance
Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit www.nedis.com/support
T: +31 (0)73-5993965
E: [email protected]
W: www.nedis.com/contact