nedis On-Ear Headphones Noise Cancelling Instruction Manual

: June 7, 2024
: nedis

Table of Contents

Main Parts (Image A)
Intended use
Specification
Using the Product
Charging the Product
Switching on the Product
Pairing the headphones to a Bluetooth audio source
Controlling the Music
Using Noise Cancelling
Making Phone Calls
Using Voice Assistant
Switching off the headphones
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis On-Ear Headphones Noise Cancelling Instruction Manual

Main Parts (Image A)

Micro USB charging port
Charging indicator LED
Built-in microphone
On/off / play / pause button
3.5 mm input
Status indicator LED
Noise Cancelling button
Previous song / Volume down button
Next song / Volume up button
USB power cable
3.5 mm audio jack

diagram, engineering drawing
diagram
Safety Instructions

WARNING

To prevent possible hearing damage, do not listen at high volume levels for long periods.
Using headphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping. · This product may only be serviced by a qualified
technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the power source and other equipment if problems occur.
Do not expose the product to water or moisture.
Do not use any charger other than that specifically provided for use with the product.

Intended use

The Nedis HPBT2160BK are Bluetooth headphones with Noise Cancelling. The product can be paired with any Bluetooth enabled audio/video device. The ear cups can be folded for easy storage. Any modification of the product may have consequences for safety, warranty and proper functioning.

Specification

Product	On-Ear headphones
Article number	HPBT2160BK
Power input	5 VDC ; 0.5 A
Bluetooth® version	5.0
Bluetooth frequency range	2402 – 2480 MHz
Frequency response	20 – 20,000 Hz
Max. radio transmit power	4 dBm
Impedance	32 Ω
Sensitivity	99 ± 3 dB
Driver size	40 mm
Battery type	Lithium-polymer, 3.7 V / 250 mAh
Charging time	Up to 3 hours
Play time	Up to 12 hours
Standby time	250 hours
Built-in microphone	Yes
Noise reduction performance	Up to 23 dB
Voice control	Siri, Google Assistant

Using the Product

Due to the wide variety of products with a bluetooth connection we cannot guaranty that all devices will be recognized or all operating options can function.

Charging the Product

Plug the USB power cable A10 into the micro USB charging port A1.
Plug the other end of A10 into a computer or power adapter.

Switching on the Product

Press and hold the on/off / play / pause button A4 for 3 seconds.

Pairing the headphones to a Bluetooth audio source

Switch on the product to activate pairing mode.
The status indicator LED A6 blinks red and blue to indicate pairing mode is active.
Enable Bluetooth on the device you want to pair nthe headphones with.
Select “HPBT2160BK” from the list of available Bluetooth devices on your device.
When paired, A6 lights up blue.
If the headphones have been paired with another device before, make sure that device is switched off.
If the headphones lose connection to the Bluetooth source, they will automatically reconnect when back in range and switched on.

Controlling the Music

Press A4 to play or pause the music.
Press the next song / volume up button A9 to skip to the next song.
Press the previous song / volume down button A8 to go back to the start of the song. Press again to go to the previous song.

Using Noise Cancelling

Press and hold the noise cancelling button A7 for 1 second to toggle Noise Cancelling on or off.
A6 lights up green when Noise Cancelling is enabled. Controlling the volume
Press and hold A9 to increase the volume. · Press and hold A8 to decrease the volume.
When the volume reaches to maximum, there is a warning tone.

Making Phone Calls

To answer an incoming call, press A4.
To reject an incoming call, press and hold A4 for 2 seconds.
To end a call, press A4.

Using Voice Assistant

Double press A4 to activate the voice assistant on your mobile phone (Siri or Google assistant).

Switching off the headphones

Press and hold A4 for 3 seconds to switch off the headphones.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT2160BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/ HPBT2160BK#support.

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055
(during office hours) Nedis B.V., de Tweeling 28 5215 MC ‘s-Hertogenbosch, the Netherlands