nedis FM Radio suitable under cabinet mounting User Guide

: June 7, 2024
: nedis

nedis FM Radio suitable under cabinet mounting User Guide

Main Parts (image A)

Mounting bracket
FM antenna
Battery compartment
Stands
Mode button
Power button
Volume wheel
Function button
Set button
LCD display
Buzzer mode indicator
Radio mode
Power cable
3.5 mm audio output
3.5 mm audio input
Memory down button
Memory up button
Tune wheel
Alarm button
Snooze / sleep button
Assembly template
Screws

diagram

diagram
diagram
diagram, engineering drawing

FM Radio
For more information see the extended manual online: ned.is/rdfm4000wt

Intended use

The RDFM4000WT is an FM radio with 30 preset radio stations that can be mounted under a cabinet to save valuable workspace. The product is equipped with clock, alarm, stopwatch and countdown functions. This product is not intended for use by persons (including children) with a reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety. The product is intended for indoor use only. The product is not intended for professional use. Any modification of the product may have consequences for safety, warranty and proper functioning.

Specification

Product	FM Radio
Article number	RDFM4000WT
Dimensions (w x h x d)	245 x 48 x 120 mm
Weight	544 g
Power input	220 – 240 VAC ; 50 Hz
Rated power	5 W
Battery type	3 VDC (2 x AA) (not

included)

Radio bands| FM
FM frequency range| 87.5 – 108 MHz
Preset stations| 30
Connections| 3.5 mm audio input and output

Safety Instructions

WARNING

Only use the product as described in this manual.
Read the manual carefully before use. Keep the manual for future reference.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the electrical outlet and other equipment if problems occur.
Do not expose the product to water or moisture.
Disconnect the product from the power source before service and when replacing parts.
Children should be supervised to ensure that they do not play with the product.
The power cable cannot be replaced. If the cable is damaged the product should be scrapped.
Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
Battery usage by children should be supervised.
Remove the batteries if you do not use the product for an extended period of time.
Unplug the product if you do not plan on using the product for an extended period of time.
Do not use the product near water.
Do not expose the product to direct sunlight, naked flames or heat.
When the product is not used for an extended period, store the product in a dry place away from sunlight and protect it against excessive dust and dirt.
Do not open the product. There are no user serviceable parts inside.
Do not put hands and foreign objects inside the product.
Keep the product away from magnetic or magnetized objects.
Extended exposure to high volumes can cause hearing loss.

Installing the product on a flat surface

Unfold the stands A4.
Place the product on a flat surface close to a power outlet.

Installing the product under cupboard (image B, C, D)

The cupboard floor thickness should be at least 16 mm.
Install the product close to a power outlet.
Use a screwdriver to fix the screws.
Do not plug the power cable A13 into the power outlet during the installation.
Do not use any accessories that are not included.
Do not install the product under a cupboard with a lighting strip installed underneath.
Do not install the product above places were steam and water can get in contact with the product.

Inserting the batteries (image E)

Open the battery compartment A3.
Insert 2 AA batteries.
Make sure to match the (+) and (-) polarity markings.
Close A3.

Connecting the product to a power source

Plug the power cable A13 into the power outlet.

Switching on the product

Press the power button A6 to switch on the product.
Press A6 while the product is switched on to switch to standby mode.
In standby mode the time and date are shown on the LCD display A10.
The display is automatically dimmed between 23:00 05:00 h

Controlling the product

Rotate the volume wheel A7 to adjust the volume to the desired sound level.
Rotate the tune wheel A18 to adjust values and press the set button A9 to confirm a setting.
Rotate and hold A18 to rapidly advance or reverse values.

Setting the clock

Switch the product to standby mode.
Press A9.
Set the current minutes and confirm.
Set the current hours and confirm.
Set the clock to 24 hour or 12 hour setting and confirm.

Setting the Calendar

Switch the product to standby mode.
Press the mode button A5.
The month, day and year appear on A10.
Press A9.
Set the current day and confirm.
Set the current month and confirm.
Set the current year and confirm.

Setting the Alarm

Switch the product to standby mode.
Press the alarm button A19 once. ALM1 appears on A10.
Press A19 again. ALM2 appears on A10.
Select the buzzer mode indicator A12 or the radio mode indicator A11 and confirm.
Set the minutes and confirm.
Set the hours and confirm.
In radio mode, press A9 again to continue and select a radio station.
When the alarm goes off, press any button to switch off the alarm.
Press the snooze / sleep button A20 to delay the alarm sound, the alarm sound resumes after 5 minutes.

Controlling the Music

Switch on the product.
Press the function button A8 to select radio or AUX function.
In radio mode the current radio frequency appears on A10.
Tune to a desired FM station or rotate and hold A18 to start the automatic scanning for the next available radio station.
In AUX mode, connect an external audio source to the 3.5 mm audio input A15 to play external audio.
The product automatically switches to standby after 10 minutes without a signal.

Saving radio Presets

In radio mode, press A9.
Select a preset number with the memory up button A17 or the memory down button A16 and confirm to save the current radio station.

Setting the Timer

Press A8 1 time. TMR appears on A10.
Press A9.
Set the seconds and confirm.
Set the minutes and confirm.
Rotate A18 clockwise to start the timer.
When the timer runs out, a signal tone sounds for about 1 minute.
When the timer goes off, press any button to switch off the sound.

Setting the Stopwatch

Press A8 2 times. STW appears on A10.
Rotate A18 clockwise to start the stopwatch.
Rotate A18 clockwise again to stop the stopwatch.
Rotate A18 counterclockwise to reset the stopwatch.

Using sleep Function

In sleep mode, the radio plays until the timer runs out. The remaining time appears on A10

Press A20 to change the remaining time in steps of 10 minutes.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product RDFM4000WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/ rdfm4000wt#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055
(during office hours) Nedis B.V., de Tweeling 28 5215 MC ‘s-Hertogenbosch, the Netherlands