ACURITE Multicolor LED Clock with Indoor Temperature and Data Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
ACURITE Multicolor LED Clock with Indoor Temperature and Data Instruction
Manual
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LED screen prior to using this product. Locate the tab and peel off to remove.
Package Contents
- Digital Clock
- Power Adapter
- Instruction Manual
Features & Benefits
-
Clock
-
AM/PM Indicator
-
Indoor Temperature
-
Day of The Week
-
Date
-
Color Selection Button
Press and release to cycle through available colors. Press and hold to turn on/off auto-cycle mode. -
Integrated Keyholes
For easy wall mounting. -
Fold-Out Stand
-
Battery Compartment Cover
-
Power Adapter
-
Built-In Cord Storage
Secures excess cord. -
Battery Compartment
-
Button
For setup preferences. -
SET Button
For setup preferences. -
Button
For setup preferences.
SETUP
-
Install or Replace Backup Batteries (Optional)
-
Remove the battery compartment cover.
-
Insert 2 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
-
Replace the battery cover.
-
Plug in Power Adapter
Plug the power adapter into a power outlet. -
Install Backup Batteries (Optional)
2 AA Batteries
IMPORTANT: Batteries are a backup power source to preserve records in the
event of a power outage.
Power adapter is required as the power source of this product.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior
to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the
battery compartment. Promptly remove dead batteries from the device. Dispose
of used batteries properly. Only batteries of the same or equivalent type as
recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose
of batteries in fire, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO
NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO
NOT short-circuit the supply terminals.
Set the Time & Date
Press and release the “SET” button, located on the back of the clock, to enter SET MODE. Once in SET MODE the preference you are currently setting will blink on the clock.
To adjust the currently selected (flashing) item, press and release the “ ” or “ “ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the
next preference.
The preference set order is as follows:
AUTO DST (ON or OFF*)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DAY
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
Enter SET
MODE at any time by pressing AND HOLDING the “SET” button.
***** If you live in an area that observes daylight saving time, DST should be set to ON.
Adjust the Backlight
This clock’s color display features 5 different lighting settings: 100%, 75%, 50%, 25%, and 10%. When the display is powered with the power adapter, the backlight remains on at 100% brightness by default. Manually adjust the backlight brightness by pressing and releasing the ” ” or ” ” buttons when not in SET MODE.
Set the Color
This clock’s display features 6 different color settings. Choose between
white, blue, violet, magenta, red, or green, or set to auto-cycle to fit your
preference. In auto-cycle mode, the display automatically cycles through all
available colors, changing every minute. Press and release the Color Selection
button on the front of the display to select your desired color.
Press and hold to turn on/off auto-cycle mode.
Care & Maintenance
Clock Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Specifications
TEMPERATURE RANGE
| 32ºF to 122ºF; 0ºC to 50ºC
---|---
POWER
| 9-ft. 9V, 1.0A power adapter (included)
2 x AA alkaline batteries (for backup; optional)
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions:
- This device may NOT cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Customer Support
AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:
Chat with
our support team at www.acurite.com/support
Email us at
support@chaney-inst.com
► Installation Videos
► Register your Product
► Instruction Manuals
► Support User Forum
► Replacement Parts
► Submit Feedback & Ideas
Warranty Info
Limited 1-Year Warranty
AcuRite is a wholly owned subsidiary of Chaney Instrument Company. For purchases of AcuRite products, AcuRite provides the benefits and services set forth herein.
For purchases of Chaney products, Chaney provides the benefits and services set forth herein. We warrant that all products we manufacture under this warranty are of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one year from the date of purchase.
Any product which, under normal use and service, is proven to breach the
warranty contained herein within ONE YEAR from date of sale will, upon
examination by us, and at our sole option, be repaired or replaced by us.
Transportation costs and charges for returned goods shall be paid for by the
purchaser. We hereby disclaim all responsibility for such transportation costs
and charges.
This warranty will not be breached, and we will give no credit for products
which have received normal wear and tear not affecting the functionality of
the product, been damaged (including by acts of nature), tampered, abused,
improperly installed, or repaired or altered by others than our authorized
representatives.
Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). If we determine that repairor replacement is not feasible, we may, at our option, refund the amount of the original purchase price.
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
We expressly disclaim all liability for special, consequential, or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
We further disclaim liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of our products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to bind us to any other obligation or liability in connection with the sale of our products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this warranty unless done in writing and signed by a duly authorized agent of ours.
In no case shall our liability for any claim relating to our products, your purchase or your use thereof, exceed the original purchase price paid for the product.
Applicability of Policy
This Return, Refund, and Warranty Policy applies only to purchases made in the
United States and Canada. For purchases made in a country other than the
United States or Canada, please consult the policies applicable to the country
in which you made your purchase. Additionally, this Policy applies only to the
original purchaser of our products. We do cannot and do not offer any return,
refund, or warranty services if you buy products used or from resale sites
such as eBay or Craigslist.
Governing Law
This Return, Refund, and Warranty Policy is governed by the laws of the United
States and the State of Wisconsin. Any dispute relating to this Policy shall
be brought exclusively in the federal or State courts having jurisdiction in
Walworth County, Wisconsin; and purchaser consents to jurisdiction within the
State of Wisconsin.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>