nedis Supports 10W Qi wireless charging User Guide

June 7, 2024
nedis

nedis Supports 10W Qi wireless charging User Guide

nedis Supports 10W Qi wireless charging User Guide

ned.is/ltlgq3m2bk
ned.is/ltlgq3m2wt

Desktop LED lamp

For more information see the extended manual online:
ned.is/ltlgq3m2xx

Main parts (image A)

nedis Supports 10W Qi wireless charging - Overview

  1. LED lamp
  2. Power input
  3. Power adapter
  4. Wireless charging area
  5. Light mode button
  6. Power button
  7. Timer button

Safety instructions

WARNING

  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the
    packaging and this document for future reference.

  • Only use the product as described in this document.

  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.

  • Do not drop the product and avoid bumping.

  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

  • Do not expose the product to water or moisture.

  • Disconnect the product from the power source and other equipment if problems occur.

Installation

  1. Plug the power adapter A(3) into the power input A(2) .
  2. Plug the other end of A(3) into a power outlet.

Using the lamp

  1. Press the power button A 6 to switch on the LED lamp A (1) .
  2. Press and hold A 6 to change the brightness of A (1) .
  3. Press the light mode button A 5 to cycle through the different light modes.
    • The light modes are Natural, Cool and Warm.
  4. Press and hold the timer button A (7) to set a timer for 40 minutes.
    • A (1) flashes twice to indicate the timer is active.
    • A (1) switches off after the timer runs out.
  5. Press A 6 to switch off A (1)

Using the wireless charger

  1. Place your QI wireless charging enabled device onto the wireless charging area A (4) .
  2. Check the charging indication on your device to ensure your device is charging.

Intended use

The Nedis LTLGQ3M2xx is a desktop LED lamp with a built-in wireless charger.
This product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

nedis Supports 10W Qi wireless charging -
Specifications

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals