PetSafe Rechargeable Lite Bark Collar User Guide

: June 7, 2024
: PetSafe

Table of Contents

Rechargeable Lite Bark Collar
Welcome
- IMPORTANT SAFETY INFORMATION
WARNING
Temperament Learning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rechargeable Lite Bark Collar

PBC17-16447
Rechargeable Lite Bark Collar

rechargeable lite bark collar
Please read this entire guide before beginning.

Welcome

You and your pet were made for each other. Our aim is to help you have the best companionship and the most memorable moments together. Your rechargeable bark collar is designed to safely and humanely eliminate nuisance barking.

We know that safe pets make happy owners. Before getting started, please take a moment to read through the important safety information. If you have any questions, please don’t hesitate to contact us.

IMPORTANT SAFETY INFORMATION

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if not avoided, could resulting death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
CAUTION, used without the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in harm to your pet.
NOTICE is used to address practices not related to personal injury.

WARNING

Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or a certified trainer.

CAUTION

This product is not a toy. Keep it away from the reach of children. Use it only for its bark stopping purpose.

CAUTION

Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made to tight on the pet’s neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores.

Avoid leaving the collar on the dog for more than 12 hours per day.
When possible reposition the collar on the pet’s neck every 1 to 2 hours.
Check the fit to prevent excessive pressure; follow the instructions in this manual.
Never connect a lead to the electronic collar; it will cause excessive pressure on the contact points.
When using a separate collar for a leash, don’t put pressure on the electronic collar.
Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth.
Examine the contact area daily for signs of a rash or a sore.
If a rash or sore is found, discontinue use of the collar until the skin has healed.
If the condition persists beyond 48 hours, see your veterinarian.
For additional information on bed sores and pressure necrosis, please visit our website.

Customer Care Center 1-800-732-2677

The PetSafe® Rechargeable Bark Control Collar must be used only on healthy dogs. We recommend that you take your dog to a veterinarian before using the collar if he is not in good health.
To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. Most importantly, your valuable information will never be given or sold to anyone. Complete warranty information is available online at www.petsafe.net.

Components

How it Works

The PetSafe® Rechargeable Bark Control Collar uses several features designed to shorten the training phase and promote good behavior.
First, the bark control collar has a unique sensor that provides the most reliable bark detection available. It also uses temperament learning to decrease and, in most cases, eliminate nuisance barking.
The system has 15 levels of static correction. It begins with low-level corrections. If excessive barking continues, the correction intensity will increase with each successive bark until the barking stops. Once the dog has learned to reduce the barking, the initial warning corrections are reduced. As a built-in safety feature, if your dog barks 15times or more within a1 minute 20 second period, the bark control collar will automatically shut off for 3 minutes.

Fitting the Collar

Important: The proper fit and placement of the bark collar is important for effective operation. The contact points must have direct contact with your dog’s skin on the underside of his neck.

Make sure that the collar is turned off.
Start with your dog standing comfortably (A).
Place the collar on your pet so that the PetSafe®logois right side up and the collar is directly under your dog’s B chin. Center the contact points underneath your dog’s neck, touching the skin (B). NOTE: It is sometimes necessary to trim the hair around the contact points to make sure that contact is consistent. However, you should never shave your pet’s neck as this may increase risk of skin irritation.
Check the tightness of the collar by inserting one finger between the end of a contact point and your dog’s neck (C). The fit should be snug but not constricting.
Allow your dog to wear the collar for several minutes, and then recheck the fit. Check the fit again as your dog becomes more comfortable with the collar.

Do not shave the pet’s neck as this may increase the risk of skin irritation. The collar should not be worn for more than 12 hours out of every 24-hour period. Leaving the collar on too long could lead to skin irritation.

Charging the Collar

Excessive charging can shorten battery life. Only charge the collar when you see the low battery light.

Lift the cover protecting the charging port and connect the charger.
Plug the charger into a standard wall outlet. The green LED will appear.
Recharges take no more than 5 hours. Although your bark collar should be partially charged, you’ll want
to fully charge it before using it for the first time. The green LED will turn off after charging is complete.
When the bark collar is charged, replace the rubber cover.

To Turn the Collar On
Press and hold the power button (D) until you hear a low to high beep andthe green LED appears, and then release. The green LED willflash once every 5 seconds.
To Turn the Collar Off
Press and hold the power button until the bark collar beeps high to low, and then release. The red LED will be illuminated during the button press and will turn off when the bark collar turns off. Quick Tip: When you’re notusing the collar, you’ll want to turn itoff. This will increase the battery life.
LED Function
The two color LED indicates the battery level. When the battery is low, the red LED will blink 3 times every 5 seconds. When itisfully discharged, no LED willflash. When the collar ischarged, the green LED willflash once every 5 seconds.

Temperament Learning

Temperament Learning tracks the number of corrections needed to substantially reduce (and in most cases) eliminate the number of nuisance barks. The collar starts at the lowest correction level and increases the intensity with each successive bark until the barking stops. This correction level becomes the starting level the next time the dog barks. Once your dog has learned to reduce this barking, the initial warning corrections are automatically reduced.
NOTE: As a built-in safety feature, if your dog barks 15 times or more within an 80 second period, the bark control collar will automatically shut off for 3 minutes.

Reset the Correction Level

Press and release the on/off button to turn ON the collar. Wait 5-10 seconds.
Press and hold the on/off button for 10 seconds. The green LED will flash 5 times.
Release the on/off button to turn the bark control collar OFF.
The correction level will then return to 1.

Testing the Collar

Plug the bark control collar into the charger.
While the charger is plugged in, press and hold the on/off button.
Continue to hold the on/off button while unplugging the bark collar from the charger. A blue LED will appear and the red and green LED’s will turn off.
Release the on/off button. After a 2 second delay, the following will begin: The bark collar will tone (beep) 15 times: once for each level of correction. Then it will sound the normal power off tone and turn itself off.
The test can be stopped at any time by pressing the on/off button.

What to Expect During Use

Important: Do not leave your dog alone the first few times he receives a correction.
Place the collar properly on your dog and wait nearby until he barks. Most dogs will understand very quickly that the collar is disrupting their urge to bark and will relax and stop barking. Because the static correction may be surprising or startling at first, some dogs may bark more at the initial correction.
On rare occasions, a dog may begin barking at the correction. If this happens, reassure your dog with a calm voice. As your dog relaxes, he will understand that if he becomes quiet,he will not receive anymore static corrections. The number of dogs that have this reaction typically will only have it the first time they wear the bark control collar. You should notice a reduction in your dog’s barking within the first couple of days that he wears the bark control collar. At this point, it is important to remember the learning process is still not complete. Dogs will “test” this new learning experience and may increase their attempts to bark. This usually occurs during the second week a dog wears the bark control collar. If this does occur, remain consistent and do not alter your use of the bark control collar. You must place the bark control collar on your dog in every situation when you expect him to be quiet. If your dog is not wearing the bark control collar, he may resume barking and his learning will suffer a setback.

Customer Care Center 1-800-732-2677

FREQUENTLY ASKED QUESTIONS

How old does a pet have to be before using the bark control collar?|

• Your pet should be at least 6 months old before using the bark control collar. The collar may be too large for dogs under 8 lbs.

Will the bark control collar work for my dog?|

• The bark control collar is safe and effective for most breeds and sizes of dogs, though it may be too large for dogs under 8 pounds to wear comfortably.

Can I attach a leash to the bark control collar?|

• No. This can result in pulling the contact points too tightly against your dog’s neck. Attach a leash to a separate, non-metallic collar or a harness, making sure the extra collar does not put pressure on the contact points.

Terms of Use and Limitation of Liability

Terms of Use This product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this product implies acceptance of all such terms, conditions, and notices.
Proper Use This product is designed for use with pets where training is desired. The specific temperament or size/weight of your pet may not be suitable for this product. Radio Systems Corporation recommends that this product is not used if your pet is aggressive and accepts no liability for determining suitability in individual cases. If you are unsure whet her this product is appropriate for your pet, please consult your veterinarian or certified trainer prior to use. Proper use includes, without limitation, reviewing the entire Operating Guide and any specific Caution statements.
No Unlawful or Prohibited Use This product is designed for use with pets only. This pet training device is not in tended to harm,injure, or provoke. Using this product in a way that is not intended could result in violation of Federal, State or local laws.
Limitation of Liability In no event shall Radio Systems Corporation be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages whatsoever arising out of or connected with the use or misuse of this product. Buyer assumes all risks and liability from the use of this product.
Modification of Terms and Conditions Radio Systems Corporation reserves the right to change the terms, conditions and notices under which this product is offered.

Customer Care
USA & Canada – Tel: 800-732-2677 Monday – Friday 8 AM – 8 PM / Saturday 9 AM 5 PM (EST)

Battery Disposal
Separate collection of spent batteries is required in many regions; check the regulations in your area before discarding spent batteries. At the end of the product life, please contact our Customer Care Center to receive instructions on proper disposal of the unit. Please do not dispose of the unit in household or municipal waste. For a listing of Customer Care Center telephone numbers in your area, visit our website at www.petsafe.net.
Compliance

FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: Modification or changes to this equipment not expressly approved by Radio Systems Corporation may void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,if not installed and use din accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult customer care, the dealer, or an experienced radio/TV technician for help.

Warranty
One Year Non-Transferable Limited Warranty This product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this product and its terms can be found at www.petsafe.net.
Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 1-800-732-2677 www.petsafe.net J400-2072
©2017 Radio Systems Corporation