SUNBA 405-ECO Network PTZ Camera User Guide

: June 15, 2024
: SUNBA

Table of Contents

SUNBA 405-ECO Network PTZ Camera
Product Information
Product Usage Instructions
- Type A: With DC12V Adapter (non-PoE)
- **Type B: With PoE Injector/Switch
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUNBA 405-ECO Network PTZ Camera

Product Information

Lite Series Network PTZ Camera

Premium Engineering. Durable Outdoor Surveillance Ideal for
House or Project Site
User Guide V11.0
2023/05 Version 11.0
Visit http://lite.sunbatech.com to access the step-by-step YouTube video tutorials for setting up Sunba IP PTZ camera.

Product Usage Instructions

Camera Bench Test

When you take the camera out of the box, please test the camera indoor first before mounting outside.

Type A: With DC12V Adapter (non-PoE)

Setup:

Connect the IP Camera to the Adapter.
Connect the Adapter to the Router.
Connect the Computer to the Router.

Note: Do NOT extend the power cable during the bench test because DC power drops quickly along the transmission.

Purpose:

A bench test helps you rule out all problems caused by power supply. Underpower causes problems such as:

PTZ issues
Unstable infrared (camera reboots repeatedly)
Spinning dome

**Type B: With PoE Injector/Switch

**

Setup:

Connect the IP Camera to the PoE Injector.
Connect the PoE Injector to the Router.
Connect the Computer to the Router.

Note: It is important to note that all Sunba pan tilt zoom cameras require to be powered by PoE+/++ adapters (injector/switch) with 802.3at/bt standard. Conventional PoE standard 802.3af delivers only 15.4W per port and using those adapters would cause underpower.

What to Test:

Does the camera rotate when powered up? When powered up, the speed dome automatically begins a self-diagnostic process during which the camera will pan horizontally and vertically to make sure PTZ, lens and other parts of the camera are functional. Please contact our technical staff if a self-test does not happen on your
unit. Please refrain from disassembling the unit before contacting us.
Live View and Picture Quality: Check the video streaming quality.
Pan Tilt and Zoom: Check whether the camera performs the pan, tilt, zoom actions properly.
Night Vision: Shield the camera front lens, turn off the lights and draw the curtains to see if the camera is able to automatically turn to infrared night vision mode.

Connection: Good
Power: Good
Video and Control: Good
Tested Day and Night: Guess we are ready to mount it outside.

Camera Setup by Smartphone

[Instructions for camera setup by smartphone]

Camera Setup by VMS Client

[Instructions for camera setup by VMS client]

WiFi Application

[Instructions for WiFi application]

Mounting Outdoor

[Instructions for mounting the camera outdoors]

Web Access

[Instructions for web access]

Assign a Static IP

[Instructions for assigning a static IP]

Access by 3rd Party Software

[Instructions for accessing the camera using 3rd party software]

Remote Access

[Instructions for remote access]

Presets, Patrol and Pattern

[Instructions for presets, patrol, and pattern]

The Full Preset List

[Full preset list]

Camera Configuration

[Camera configuration instructions]

Account Management

[Instructions for account management]

Motion Detection

[Motion detection instructions]

Face Capture

[Face capture instructions]

FTP Communication

[FTP communication instructions]

Reset the Camera

[Instructions for resetting the camera]

Cable Waterproof Measures

[Cable waterproof measures instructions]

Audio Setting

[Audio setting instructions]

Specifications

FCC Warning (U.S.A)
The device has been tested in compliance with limits set by Part 15 of Federal Communication Commission (Class B).
The operation of the device is thus limited by the following two conditions:
1. It is not permitted to cause harmful interference to any authorized radio communications.
2. It must accept any interference it receives.

FAQ

Q: How do I contact support?
A: You can contact support by emailing support@sunba.net.

FCC Warning (U.S.A) The device has been tested in compliance with limits set by Part 15 of the Federal Communication Commission (Class B). The operation of the device is thus limited by the following two conditions: 1) it is not permitted to cause harmful interference to any authorized radio communications, and 2) it must accept any interference it receives. WARNING: Please test the camera indoors before mounting it outside. Stay at least 24 hours to test both daytime and night vision IR LED.