Harley Benton 372334 PowerPlant Tuner User Guide
- October 27, 2023
- Harley Benton
Table of Contents
PowerPlant Tuner.
372334 PowerPlant Tuner
Quick Start Guide
This quick start guide contains important information on the safe operation of
the product. Read and follow the safety advice and instructions given. Retain
the quick start guide for future reference. If you pass the product on to
others please include this quick start guide.
Safety instructions
Intended use This device is intended to be used for sound processing of
signals from musical instruments with electromagnetic pickups. Any other use
or use under other operating conditions is considered to be improper and may
result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! Never let children unattended use electrical devices.
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device
and possibly the user. Unplug the external power supply before electrical
storms occur and when the device is unused for long periods of time to reduce
the risk of electric shock or fire.
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your surface and after some time cause permanent
dark stains. In case of doubt, do not put the rubber feet directly on the
surface and use a suitable underlay if necessary, i.e. felt pads or similar.
Fire hazard due to exceedance of the maximum current
The device can power other devices of identical construction. The current
consumption of all other devices connected in series must not exceed the
values indicated in the technical specifications. Otherwise you risk injuries
and irreparable damages to the device. Only connect so many identical devices
that the maximum current consumption
is not exceeded. Ensure the sufficient dimensioning (wire cross section) of
the power cables used for all devices connected in series.
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Chromatic floor tuner with external power adapter to supply up to eight further 9-V devices
- Suitable for guitar and bass
- 12 Hz … 4186 Hz
- Accuracy ± 1 cent
- Excellent readability due to large LED / LC display
- Power supply via stabilized DC power adapter (100 … 240 V AC), included
- Supply of connected devices via included DC cables
- Outputs: 6 × 9 V DC, each loadable with 100 mA 2 × 9 V DC, each loadable with 500 mA
Connections and operating elements
- 9V Input socket for an external DC 9 V power supply
- IN 1/4″ input jack socket for standard instrument cable
- OUT Use this 1/4″ output jack socket to feed the input signal to an amplifier or further effects pedals.
- True Bypass Pedal switch to enable True Bypass mode for feeding the unchanged input signal to an amplifier or another effects pedal. Press the pedal switch to leave True Bypass mode and tune your instrument. That mutes the output.
- Display
- Six output sockets for the power supply of further devices with 9 V, each loadable with 100 mA.
- Two output sockets for the power supply of further devices with 9 V, each loadable with 500 mA.
Technical specifications
-
Input connections
1 × socket for power adapter
1 × 1/4″ jack socket -
Output connections
6 × socket for power supply of further devices, each 100 mA
2 × socket for power supply of further devices, each 500 mA
1 × 1/4″ jack socket -
Tuning range
12 Hz … 4186 Hz -
Current consumption
120 mA (only PowerPlant Tuner, without connected devices) -
Output current
1600 mA
• Power supply
• Operating voltage
• Degree of protection
• Dimensions (W × H × D) • Weight
• Ambient conditions| External power adapter, 100 – 240 V ~ 50/60 Hz
9 V ****/ 2 A, centre negative
IP20
70 mm × 55 mm × 122 mm
300 g (without power adapter)
Temperature range 0 °C…40 °C
Relative humidity 20 %…80 %
(non-condensing)
---|---
A detailed user manual is available to download on the product website on our homepage www.thomann.de.
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these
materials with your normal household waste, but make sure that they are
collected for recycling. Please follow the notes and mark- ings on the
packaging.
**** This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose of
your old device with your normal household waste. Dispose of this product
through an approved waste disposal firm or through your local waste facility.
Comply with the rules and regulations that apply in your country. If in doubt,
consult your local waste disposal facility.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach •
www.thomann.de •
info@thomann.de
DocID: 372334_10.08.2022
Documents / Resources
|
Harley Benton 372334 PowerPlant
Tuner
[pdf] User Guide
372334, 372334 PowerPlant Tuner, PowerPlant Tuner, Tuner
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>