PetSafe M400-2506-17 Sliding Glass Pet Door Security Bar User Manual

June 1, 2024
PetSafe

PetSafe M400-2506-17 Sliding Glass Pet Door Security Bar

PetSafe M400-2506-17 Sliding Glass Pet Door Security
Bar

What you have

What you have

What you need

What you need

If installing with screws:

What you need

Before we start

Before we start

The security bar fits into the opening between your sliding glass door and frame. It is designed for use in sliding glass doors with a pet door panel installed. You can mount the security bar at any height you prefer. Use screws for the most secure installation.

  1. Attach the bracket and clip to the ends of the security bar.
    Before we start

  2. Adjust the length of the security bar to fit the opening between your sliding glass door and frame. Remove the pin and extend the inner rod of the security bar to the desired length, then line up the holes in the outer and inner rods and re-insert the pin. There are two holes in the outer rod and four holes in the inner rod, allowing eight different length adjustments. You can make further adjustments by rotating the threaded end of the security bar to extend or retract it.
    Before we start

  3. Make sure the security bar is level, then make marks on your sliding glass door and frame to indicate where to mount the bracket and clip. Set the security bar aside.
    Before we start

  4. Remove the bracket and clip from the security bar and mount them to your sliding glass door and frame at the locations you marked. If using:

    • Adhesive – Using an alcohol wipe or solution, clean and dry the bracket, the clip and the surfaces to which they will be attached. Peel the backing from one side of the adhesive and press it onto the back of the bracket or clip. Peel the backing from the other side of the adhesive and press the bracket or clip into place in the marked location.
    • Screws – Attach the bracket and clip to the door frame using the screws provided.
      Depending on your frame material, you may wish to drill 2.5 mm pilot holes first for ease of installation.
      Before we start
  5. To use the security bar, hook the security bar on the bracket, then swivel it upward and snap it into the clip.
    The security bar can hang from the bracket at the side of the door frame when not in use.
    Before we start

Let’s keep you and your loved ones safe and secure.

Customers Support

Let us help!
1-Year Warranty
For important safety information,
please see the customer care guide.
United States
800-732-2677

©2021 Radio Systems Corporation petsafe.com M400-2506-17/1

Radio Systems Corporation
10427 PetSafe Way
Knoxville, TN 37932 USA
+1 865-777-5404

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals