VICTOR VWRP-5000 Mounment 8 In 1 Wood Music Center Instruction Manual

VICTOR VWRP-5000 Mounment 8 In 1 Wood Music Center

WARNING

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Important Safety Instructions

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at the plugs, power outlets, and at the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12. Unplug the apparatus during lighting storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.
16. The use of the equipment in moderate climate.
17. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
18. Do not place open flame sources, such as lighted candles, on the apparatus.
19. The symbol with indicates AC voltage.
20. CAUTION: These servicing instructions are for use by qualified service personnel only.
    To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

FEATURES

The Monument 8-in-1 Mahogany Wood Music Center features a great retro design and solid wood construction. With a 3 Speed turntable, CD & Cassette Player the Monument is ready to play all your music! The Dual Bluetooth feature allows streaming of your music to an external speaker. Record and playback all your favorite songs with the built in USB player & recorder. Also features built in Speakers & AM/FM Radio.

• 3-Speed record player with Auto Return will play 33 1/3, 45, 78 rpm records
• Bluetooth In connectivity allows you to stream music from another source up to 33 feet away.
• Bluetooth Out Connectivity allows you to stream vinyl playback through any external Bluetooth Speaker
• CD & Cassette Player and AM/FM Radio
• USB Input for Playback & One Touch Recording of your favorite Music
• Built in Stereo Speakers for playback convenience
• Includes a 3.5mm Aux input for additional connectivity options

SPECIFICATIONS

Adaptor, User Manual, Quick Set Up Guide

• Distance may vary depending on any objects or interference between devices.

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE

PRODUCT OVERVIEW

Turntable

1. Turntable Platter
2. Turntable Spindle
3. Transport Screw
4. Cue Lever
5. Speed Selector
6. Hold Down Clip
7. Tone Arm

Front Panel

1. USB Port
2. CD Door
3. BT (Bluetooth) Out indicator
4. AUX IN Jack
5. Power Button
6. Function Knob
7. Record/Erase Button
8. Open/Close
9. Repeat Button
10. Rewind / Previous Button
11. FM/AM Button
12. Display
13. Item Up/Down Buttons
14. Fast Forward / Next Button
15. Stop / Pair Button
16. Program / Memory Button
17. Play/Pause / Bluetooth Transmitter Button
18. Volume +/- Tuner

Back Panel

1. FM Antenna
2. Cassette Eject/Fast Forward Button

Side Panel

1. DC IN Jack
2. Line Out Jack

SETUP & BASIC OPERATION

Essential Setup

1. Unpack the unit and remove all packaging materials.
2. Place the unit on a flat and level surface. The selected location should be stable and free from vibration.
3. Plug the power adaptor into the electrical outlet and connect other end to the back of the unit.
4. Press the Button on the upper right corner of the front panel. The display will light up in amber background, and the playback mode will appear on the display.
   When the unit is playing music, the playback message will appear on the display.

To Open Turntable Cover:

1. Lift the turntable cover all the way up until it stops.
2. Lower the cover slowly until the latch engages. If the latch does not engage, pull the lower bar by hand.
3. The cover will now stay open.

To Close Turntable Cover:

1. Lift the cover all the way up until it stops.
2. The latch should disengage and you may now slowly lower the cover. If the latch does not disengage, push out the lower bar by hand.
3. Make sure you hold the cover to avoid pinching your fingers as it closes.

Common playback control

• Press the PLAY/PAUSE button to pause / play the playback.
• Press the or button to skip to next or previous track.
• To search for a part of track: press and hold the or button and release it when the part you want is found.
• Search for a folder, press the Item Up/Down buttons to choose the folder.
• Press the STOP/PAIR button to stop playing.

Note: These controls do NOT always function in specified playback mode.

Repeat function
Press REPEAT button:

• one time, to repeat the current track.
• two times, to repeat the current folder.
• three times, to repeat all tracks of the disc.
• four times, to cancel the repeat function.

Note: This feature functions in CD and USB mode.

Program function
This function enables you to set the playback of tracks into an ordered playlist.

1. Press the STOP button; then press the PROG/MEMORY Button to activate the program feature. The display will show “MEMORY”, “P01” and blinking “00”.
2. Press the or button to select your track.
3. Press the PROG/MEMORY button again to confirm.
4. Repeat the above steps to program other tracks.
5. After finished, press the PLAY/PAUSE button to start playback.
6. Press the STOP button once to stop.
7. Press the STOP button twice to erase the programmed track, and “MEMORY” will disappear from the display.

Note:

• This feature functions in CD and USB mode.
• This unit can program up to 20 tracks.
• Turning the power off or switching to other playback modes by turning the Function Knob will automatically erase the programmed playlist.

RADIO OPERATION

1. Set the Function Knob to TUNER position.

2. Press the AM/FM button to receive AM or FM signals. Note to extend the FM antennae when you want to listen to FM stations.

3. Press and hold the or button to search for available stations.

4. Adjust the volume by switching the VOLUME +/- Tuner.

5. You can store your favorite station to the unit and listen it

   • When you are listening to a radio channel, press PROG/MEMORY button, “MEMORY” will appear and blink on the display.
   • Press or button to select a number as the serial number of the current channel.
   • Press PROG/MEMORY button again to confirm.
   • Repeat the a-c steps to store other your favorite radio channels.
   • To listen the stored radio channels, just press PROG/MEMORY button, then use or button to select the serial number of your favorite radio channel, press PROG/MEMORY button again to confirm. Then the selected channel starts to play.

You can improve the signal receiving strength by:

• Extending the FM Antenna to a higher position.
• Turn the unit to face different directions.
• Move the unit to a different place.
• Connect the FM Antenna to your outdoor antenna.

CD OPERATION

1. Set the Function Knob to CD position.

2. Press the OPEN/CLOSE button to open the disc tray.

3. Place your desired audio CD on the tray with its label side up.

4. Press the OPEN/CLOSE button to close the tray.

5. The CD will start to play automatically.

Note:

• Do not pull or push the disc tray manually.
• Ensure the disc is placed in the center of the disc tray with its label side up.
• Be sure the inserted disc is an Audio CD / MP3 CD, not DVD or any other type of disc.

AUX IN OPERATION

With the AUX IN function, you can play music from an external device on the speakers of your VWRP-5000.

1. Insert one end of the 3.5mm AUX in cable into the AUX IN Jack on the upper right of the front control panel, the other end to your playing device.

2. Set the Function Knob to AUX/PH position.

3. Start to play your favorite music on your playing device.

USB OPERATION

1. Set the Function Knob to USB position.

2. Insert a USB device (only with .mp3 audio files) to the USB Port.

3. The unit will start playback automatically.

4. Use the volume and control buttons to control playback.

Note: control buttons may not work with all USB devices due to manufacturing differences.

Recording with USB
With this function you can record music from your player onto a USB device in .mp3 format.

1. Insert a USB device into the USB port.
2. Play music in the CD, AUX, Phono, BT or Tape mode.
3. Press the RECORD/ERASE button repeatedly until USB REC starts blinks in the lower left corner of the display (the information on the display varies with the playback mode when RECORD/ERASE button is pressed each time). Now the recording process starts.
4. Press the STOP/PAIR button to stop recording, and “END-REC” will appear on display. Now the recording process ends.

Note: If you want to listen the latest record track, just press button if it does not start to play automatically.

Erasing Files on the USB Device

1. Insert a USB device into the USB port and play the song you want to delete.
2. Press and hold the RECORD/ERASE button for about two seconds, “ERA” with blinking, and “ONE” will appear on the display.
3. Press the button to select:
   • ERA ONE – erase the current track
   • ERA FOLD – erase all the audio tracks in the entire folder
   • ERA ALL – erase all the audio tracks on the USB device
4. Press the RECORD/ERASE button again to confirm. “ERA WAIT” will appear, and erasing process starts.
5. When all tracks and folders erased, “NO SONG” will be shown on display.

CASSETTE TAPE OPERATION

1. Set the Function Knob to BT/TAPE position.

2. Insert a recorded cassette with its exposed side facing outwards. Push inwards until a CLICK sound is heard. Playback will start automatically.

3. During playback, you can lightly press and hold the Eject / Fast Forward button to accelerate the playing speed and release your finger when the part you want to listen to is found.

4. To stop playback and eject the tape, push the Eject / Fast Forward but ton all the way in until the tape is ejected.

VINYL RECORD OPERATION

1. Press the Power Button to turn on the unit and open the cover.

2. Set the Function Knob to “AUX/PH” position.

3. Detach the stylus protector by pressing both sides and pulling straight in the direction shown.

4. Place a vinyl record on the Turntable by aligning the Turntable Spindle to the record hole.

5. Slide the Speed Selector to 33, 45 or 78 to match the play speed of the record.

6. Unlock the Hold Down Clip.
   

7. Raise the Cue Lever to lift the Tonearm off the Tonearm support.

8. Gently move the Tonearm to the edge of the record (or the starting point of a track).

9. Release the Cue Lever to put the Tonearm onto the record. Turntable will begin playback.

10. Turn the VOLUME +/- Tuner to adjust the volume. To pause/stop during playback, raise the Cue Lever to lift the Tonearm off the record.

11. When finished listening:

    • Raise the Cue Lever to lift the Tonearm off the record.
    • Move the Tonearm to its support.
    • Lower the Cue Lever to release the Tonearm.
    • Lock the Hold Down Clip.

Note:

• Pull out the Aux in cable before playing a vinyl, or the unit will switch to AUX mode automatically.
• Put the 45 RPM Adapter across the Turntable Spindle firstly if playing a 45 RPM record.
• After you play 78 RPM vinyl record, it will stop in about 120 seconds.

BLUETOOTH® OPERATION

With the Bluetooth® In function, you can play music from an external Bluetooth® device on the speakers of your VWRP-5000.

1. Set the Function Knob to BT/TAPE position. “BT” will blink on display.

2. Turn on your external Bluetooth device and pair with the “VICTOR VWRP-5000” device.

3. When the Bluetooth connection is established, you will hear a short confirmation sound from the unit, and “BT” will stop blinking on the display.

4. Start to play your favorite music on the connected device.

Note: Make sure the cassette tape not inserted in the unit, or it will be TAPE mode.

Bluetooth® Transmitter
You can play music from your VWRP-5000 on external Bluetooth® speakers, soundbar, earbuds, or headphones.

1. Disable the Bluetooth® function on all devices nearby (e.g. amplifier, soundbar, wireless headphone, smart phone, iPad).
2. Play music in the CD, AUX, Phono, USB, Tuner, or Tape mode.
3. Press and hold PL/PA/BT OUT Button to activate Bluetooth Transmitter function. The BT OUT indicator will start to blink in blue.
4. Power on your Bluetooth® speakers or headphones and activate its Bluetooth pairing mode.
5. After a few seconds, the blinking BT OUT indicator turns to solid blue, and a beep will be heard, which means your turntable will connect automatically.
6. To change volume playback, adjust the volume on your Bluetooth® device.
7. To turn off BT OUT mode, press and hold the PL/PA/BT OUT Button again. The BT OUT indicator will be turned off.

CARE & MAINTENANCE

Always keep the turntable clean. If the surface of the unit gets dirty, wipe with a soft dry cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using.

Beware of condensation
When the unit (or a record/disc) is moved from a cold to warm place, or used after a sudden temperature change, condensation may form; vapor in the air could condense on the internal mechanism, making correct operation erratic or impossible. To prevent this, or if this occurs, leave the unit turned off for one or two hours. The unit will stabilize at the temperature of its surroundings.

Using Compact Discs
Discs which can be played on this unit:

• Conventional audio CD

• Properly finalized CD-R and CD-RW discs

• Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.)

• To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Should the disc become dirty, wipe the surface radially (from the center hole outward towards the outer edge) with a soft, dry cloth.
  

• Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface.

• Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to “skip.”

• Do not expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperatures will warp the disc.

• Do not play any disc that is warped, deformed or damaged. Playing such discs may cause irreparable harm to the playing mechanisms.

• CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location where direct sunlight will fall on them, and away from sources of heat such as radiators or heat-generating electrical devices.

• Printable CD-R and CD-RW discs are not recommended, as the label side might be sticky and damage the unit.

• Do not stick papers or protective sheets on the discs and do not use any protective coating spray.

• Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.

• Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction.

• Do not use CDs with an irregular shape (octagonal, heart shaped, business card size, etc.). CDs of this sort can damage the unit:
  

• If you are in any doubt as to the care and handling of a CD-R/CD-RW disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

Using Cassette Tapes

Tape Handling :

• Use your finger or a pencil to turn the cassette tape’s hub and take up any slack tape.
• Avoid touching the tape. Fingerprints attract dust and dirt.
• Avoid dropping or subjecting cassettes to excessive shocks.
• As C-120 tapes are physically weak and could become entangled in the transport mechanism, do not use them.

Do not store tapes in the following places:

• On top of heaters, exposed to direct sunlight or in any other places with high temperatures.
• Near speakers, on TV sets or amplifiers or where they would be exposed to strong magnetic fields.
• Where humidity is high or in dirty, dusty places.

Head Maintenance
The head and tape path should be cleaned and demagnetized periodically. Please use a cassette type head cleaning tape and demagnetizer. For specific details on the proper use of either item, please read each item’s instruction manual.

Maintaining Vinyl Records

• Do not touch the record’s grooves. Only handle records by edges or label.
  

• Make sure your hands are clean. Skin oils from even clean hands can leave a residue on the record surface that will gradually deteriorate the quality of your record.

• Keep your records away from dust. Store in a cool, dry place.

• Keep records in sleeves and jackets when not in use to avoid dust and scratches.

• Store records upright on edges. Records stored horizontally will bend and warp.

• Do not expose records to direct sunlight or high humidity and temperature. Long exposure to high temperatures will warp records.

• Do not store records in the trunk of a car.

• Store records in an area with a stable temperature and low humidity.

• Should the record become dirty, gently wipe surface in a circular motion, using a soft anti-static cloth.

How to Replace the Stylus
The stylus should last about 50 hours under normal use. However, it is recommended that the stylus be replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus may damage the record. Wear and tear on the stylus will be accelerated when playing 78 RPM records. The higher speed of 78 RPM records can wear the stylus more quickly .

Caution:

• Do not bend the stylus.
• To avoid injury, do not touch the needle.
• Turn off the unit’s power before you replace the stylus.
• Keep out of the reach of children.
• Handle with care, as the stylus is delicate. Use of a bent or broken stylus may damage the record and cause the turntable to malfunction.
• Do not expose stylus to extreme heat.
• Contact a qualified repair company if you experience difficulty in changing the stylus.

Removing an Old Stylus

1. Set a screwdriver at the tip of the stylus and push down to the direction “A”.
   

2. Pull the stylus out toward direction “B”.

Installing a New Stylus

1. Hold the tip of the stylus and insert the other edge by pressing toward direction “C”.
   

2. Push the stylus up toward direction “D” until it locks at the tip.

TROUBLESHOOTING GUIDE

In case of trouble with the unit, please look through the problems below and see if you can solve them yourself before calling your dealer.

No power

| Check the connection to the AC power source. Make sure the AC source is not a switched outlet and if it is, turn the switch on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan.
No sound|

• Adjust the volume
• Connect the AUX IN cables into the correct jack.

The sound has interference| The unit is too close to a TV set or similar appliance. Relocate the unit further away from them or turn the other appliances off.
Radio| Cannot listen to any station or signal is weak|

• Tune in the station properly.
• If a TV is near the unit, turn it off.
• Rotate the unit or antenna wire for the best reception position.

Record Player| Will not play|

• Turn the VOLUME KNOB clockwise.
• Loosen the screw and detach the stylus guard. The stylus guard is a white plastic cover that protects the stylus during transportation. Failing to remove this guard will not allow the needle to contact the grooves of the record and no sound will be heard!
• If the stylus is worn-out, change the stylus. Select the correct playback speed.

Sound skips|

• Place the unit on a stable surface to avoid vibration and shock. Make sure the unit is level both front to back and side to side.
• Clean the surface of the record/disc.
• Do not use scratched, damaged or warped records/discs.

CD Player| Will not play|

• Turn the VOLUME knob clockwise and rotate the FUNCTION KNOB to “CD”.
• Load a disc with the playback side facing down.
• If the disc is dirty, clean the surface of the disc.
• A blank disc has been loaded. Load a pre-recorded disc.
• Depending on the disc, it may not be possible to play back CD-R/CD-RW discs. Try again with another disc.
• You cannot play back unfinalized CD-R/CD-RW discs. Finalize and try again.

Bluetooth®| Will not play|

• Device is NOT paired properly; turn OFF Bluetooth, turn ON Bluetooth and repair device.

Cassette Player| Button does not

work

|

• Insert the cassette tape securely.

Sound is distorted|

• Clean and demagnetize the heads.
• Use normal tape.

AUX In| No Sound|

• Ensure external player works when not connected via AUX cable.
• Ensure AUX In cables are securely connected and not damaged.
• Increase the volume level.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The device must not be colocated or operating in conjunction with any other antenna or transmitter.
To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.

IC STATEMENT

This device complies with RSS247 of Industry Canada.  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with IC radiation exposure limits set forth for an uncontrolled environment.
The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

CAUTION ON MODIFICATIONS
Any changes or modifications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate this equipment. Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed-out trash can symbol, seen the right side. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste but should be disposed of separately. All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites or be collected from the households. Additional information is available at the technical department of your city.

SUPPORT

We do our best to offer high quality products to our customers. If you experience any issues or problems with your product, please contact customer support as many issues can be quickly resolved.

If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.naxa.com to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support.

Naxa Technical Support
2320 East 49th St.
Vernon, CA 90058
(866) 411-6292
http://www.naxa.com/supportcenter

• This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC.

VICTOR and the DOG & GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC.

Further information at www.victor-brand.com.
All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>