brother QL-810Wc Series Label Printer with Wireless Networking Instruction Manual
- June 11, 2024
- Brother
Table of Contents
D02JDX001A
QL-810Wc / QL-820NWBc / QL-1110NWBc
QL-810Wc Series Label Printer with Wireless Networking
These derivative models are similar to the original models as listed in the table. For operating instructions and troubleshooting, see the original models’ documentation at support.brother.com.
| Your model | Original model |
|---|---|
| QL-810Wc | QL-810W |
| QL-820NWBc | QL-820NWB |
| QL-1110NWBc | QL-1110NWB |
The following specifications are different from the original models’ specifications:
| Description | QL-810Wc | QL-820NWBc | QL-1110NWBc |
|---|---|---|---|
| USB port for USB flash drives | N/A | Not Supported | Not Supported |
| Wireless connection with Ad-hoc mode | Not Supported | Not Supported | Not |
Supported
Security protocol WPA3TM
– WPA3-SAE (TKIP+AES), WPA3-SAE (AES)| Supported| Supported| Supported
Security protocol LEAP| Not Supported| Not Supported| Not Supported
Bluetootha version| N/A| 5.| 5.
Bluetooth profile – BIP| N/A| Not Supported| Not Supported
Coin Cell Battery replacement instructions (QL-820NWBc)
-
Gently lift the safety cover away from the battery cover and keep it in the raised position, as shown.
DO NOT remove the safety cover. -
Use a coin or similar object to turn the battery cover in the direction shown in illustration A, and then remove the battery cover.
-
Insert the new battery, making sure the + and – symbols facing the correct direction.
-
Replace the battery cover and, using a coin or similar object, slowly turn the battery cover in the direction shown in illustration B until it locks into place.
Information for compliance with Commission Regulation 801/2013
| QL-810Wc| QL-820NWBc| QL-1110NWBc
---|---|---|---
Power consumption*| 1.3 W| 1.6 W| 1.8 W
- All network ports activated and connected.