Johan Lewis White/Wood Triple Plate Spot User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
Johan Lewis White/Wood Triple Plate Spot
This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk
We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please e-mail lightingparts@JLPspares.co.uk
Trouble Shooting:
Why is the light not working when switched on? Check your power supply is
switched on Turn off light and check that the bulb is inserted correctly Check
the bulb is still in working order.
Thank you for purchasing this White/Wood Triple Plate Spot.
Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product. Please keep these instructions for
future reference.
Warnings!
This product is Class I and must be earthed.
This fitting should be fitted in accordance with IEE Regulations and the
Building Regulations. If in any doubt, or where required by law, consult a
competent person who is registered with an electrical self-certification
scheme. Further information is available online or from your Local Authority.
To prevent electric shock, switch off at the mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electricity
supply without your knowledge.
If you are in any doubt, please consult a qualified electrician. If replacing
an existing fitting, make a note of the connections. Always use the correct
type and power bulb. Never exceed the power stated.
When changing a bulb, always switch off at the mains and allow the old bulb to
cool down before handling. Dispose of used bulbs carefully.
The flexible cable on this luminaire, if damaged, shall only be replaced by
the manufacturer or his service agent or a similar qualified person.
Caution! The bulb and surrounding parts can become hot during use.
Important!
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish. Indoors use only.
Replace bulbs from John Lewis or established brand of the same type and
compatibility.
Assembly
Ensure the mains electricity supply switched off a t the fuse board.
Step 1: Ensure that the bracket (supplied) is fixed to a wooden joist, or
use a suitable fixing to the ceiling which will support the weight of the
fitting.
Step 2: Connect cables to
terminals as shown below.
Check all wires are tight in the terminal block and no loose strands are left
out.
Cover with insulating tape (not included).
Push up ceiling plate and secure with grub screws
provided.
Step 3: Fit shade over lamp holder and secure with shade ring by tool
provided.
Step 4: Attach the correct type
and wattage bulb to the lamp holder (bulb not included).The maximum power
indicated must not be exceeded.
Switch on the electricity supply at the fuse board.
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- 📧lightingparts@JLPspares.co.uk
- Everything you need to know to Recycle More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>