Johan Lewis Calia Dining Table 190×95 User Manual

June 7, 2024
JOHAN LEWIS

Johan-Lewis-Logo.png

Johan Lewis Calia Dining Table 190×95 User Manual

Johan Lewis Calia Dining Table 190x95

H76 W95 D190cm

Thank you for purchasing the Calia Dining Table. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.

From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety and quality of the product we sell.

We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.

The John Lewis Team

FIG 1 Tools required

Important safety information

Warnings

  • The product should only be used on firm, level ground.
  • Keep small parts out of reach of children.
  • Ensure the product is fully assembled as illustrated before use.

Do’s

√ Check the pack and make sure you have all the parts listed.
√ Check all screws or bolts are tightened and inspect regularly.
√ Make sure the legs remain in contact with the ground at all times.

Don’ts

× Do not over tighten screws or bolts.
× Do not stand on the product.
× Do not use power tools to construct as over tightening and panel failure may occur:

FIG 2 Important safety information

FIG 3 Important safety information

Your Calia Dining Table

FIG 4 Your Calia Dining Table

FIG 5 Your Calia Dining Table

Internal Dimension

Stock number: 836 03002
Calia Dining Table, overall size: H76 W95 L190cm

Fixtures and fitt

FIG 6 Fixtures and fitt

Fixtures and fittings Supplied (Actual size)

FIG 7 Fixtures and fittings

Fixtures and fittings Supplied (No Actual size)

FIG 8 Fixtures and fittings

Product Assembly

Calia Dining Table

836 03002

Step 1: Parts fittings and tools

Step 2: Parts fittings and tools

FIG 10 Parts fittings and tools

Care and maintenance

Wood furniture
Wood displays different grain patterns depending on which way they are cut –for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber-these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic. Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer fronts by the way slivers are arranged. All timber and veneer surfaces will change colour and mellow over time. New furniture will initially vary in shade from items that have been previously purchased.

How to care for your wood furniture
Your Calia furniture should be dusted or wiped over with a damp cloth. Do not use abrasive cleaner. Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface when building up over time.

Make sure all surface are protected from heat and liquids by mats and coasters. Wipe up spills immediately and ensure that a mat or pad is placed under if you are writing.

Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack humidity caused by home heating can cause damage such as warping.

How often should the piece of furniture be treated with oil?

  1. Preferably already before use
  2. The surface should be treated when necessary, and we suggest as often as every three months

How do you apply the oil to the piece of furniture?

  1. Apply plenty of oil with a clean cloth. Table tops must be treated underneath as well as on the top side. (Do not drop oil on the floor!)
  2. After 15 minutes, polish with a sandpaper sponge or fine sandpaper (no. 150) along the grains of the wood
  3. Polish off remaining oil with a clean, dry cloth
  4. Do not use the item, until the oil is completely absorbed
    Your piece of furniture is already oil treated from the factory.

We recommend to use Woca “Worktop oil – natural” – item no. 527713AA (0.75 L) – available at http://www.wocadenmark.co.uk

Safety instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.

Retain these instructions for future reference.

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

JOHAN LEWIS User Manuals

Related Manuals