Avantree Portable Wireless Car Kit User Manual
- June 7, 2024
- Avantree
Table of Contents
Avantree Portable Wireless Car Kit
Overview
What’s in the box?
A. Avantree Bluetooth receiver
B. 3.5mm extension cable
C. USB charging cable
D. User manual / Quick user guide
Basic operations
Component
| Function|
Operation
---|---|---
Power Switch
| Power On/Off| Slide to ON/OFF position
MFB
| Pairing mode| Press and hold for 2 seconds until the LED flashes Blue and Red
alternately
Manually re-connect| Press once
Answer/End a call| Press once
Reject a call| Press and hold for 1 second
Redial| Double click
Voice dial (phone feature)| Press and hold for 1 second
Play/Pause| Press once
V+
| Volume Up| Long press
V-
| Volume down| Long press
V+
| Next track| Press once
V-
| Previous track| Press once
Pairing and connecting
Step 1
Release 3.5mm plug (press button on top). (Note: to retract plug, press and
hold button to release lock).
Step 2
Plug the Avantree Bluetooth CK210 into the 3.5mm port of car stereo then turn
CK210 ON.
Step 3
Press and hold the MFB for 3 seconds to enter pairing mode( Note: On first
use the CK210 will automatically enter pairing mode).
Step 4
Activate Bluetooth on your phone – search for new devices.
Step 5
Select “Avantree CK210” on your phone.
Note:
Once paired and connected, it will auto re-connect the next time.
Multi-point: pairing 2 phones simultaneously
Step 1 Connect the first phone (instructions above) then turn off its
Bluetooth function.
Step 2 Set the CK210 into pairing mode again.
Step 3 Turn on Bluetooth on the second phone and connect with the CK210.
Step 4 Reboot the CK210 by turning it off then on again. Turn on the
Bluetooth on the first phone.
Both phones will now be connected to the CK210.
Clear pairing history
You may need to reset the CK210 if it is not working as expected. When reset to its factory default settings, all the paired device information will be erased.
Step 1 Set the CK210 to PAIRING MODE – press and hold the MFB for 3
seconds until the LED flashes BLUE and RED alternately.
Step 2 Double click the MFB – the BLUE and RED LEDs will turn on for 1
second to indicate a successful reset. Then it will automatically enter
pairing mode
How to charge
When the battery runs low, the RED LED will flash every 2 seconds. Recharge
the CK210 by plugging it into a USB car charger (not supplied) or PC USB port
using the supplied charging cable. It normally takes 1.5 hrs to fully charge
the battery. The LED will indicate red when charging and turn off when
charging is completed.
Charging requirements: DC5.0V/ 500mA-1A.
Product specifications
- BT Version: 4.0
- Support Profile: A2DP, AVRCP, HSP, HFP
- Operation Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM band
- Operation Range: Class 2, Up to 30ft.
- Working Time: 8 hours
- Standby Time: 130 hours
- Charging Time: 1.5 hours
- Charger Voltage: DC5.0V, 500mA
