Johan Lewis Didi table light User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
Johan Lewis Didi table light User Manual
Didi table light
Recommended bulb
1 x 5W LED GU10
Bulb included
Specification
Max power: 6W
Voltage: 220~240V, 50Hz
IP20
Weight 0.5Kg
Please retain these instructions for future reference.
This symbol indicates that this product should be installed so the bulb is no
closer than 30cm from the surface it is illuminating This symbolindicates that
this product should not be treated as normal house-hold waste and it should be
recycled. John Lewis does not operate in store take back, but as members of
the Distributer Take Back scheme have funded the development and upgrade of
recycling facilities across the UK. Please take it to your nearest collection
facility or for further details contact your local council or visit www
.recycle-more.co.uk. We have taken great care to ensure that this product
reaches you in perfect condition. However, should any parts be damaged or
missing please e-mail lightingparts@JLPspares.co.uk
Trouble shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
John Lewis partnership
171 Victoria Street
London SW1E 5NN Johnlewis.com
Made in China
Issue 02 12/19
Thank you for purchasing this Didi table lamp. Please read the instructions
carefully before use to ensure safe and satisfactory operations of this
product.
Please keep this instruction for future reference.
Warnings!
The supply cable runs through the inside of this product. Take care not to
place undue stress on the cable whilst unpacking to prevent the possibility of
a poor connection.
If you are in any doubt consult a person competent to give advice on the
assembly of electrical equipment.
If the external flexible cable of the lamp is damaged it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
To prevent electrocution switch off at the mains supply before assembling or
maintaining this fitting. Ensure the plug is not connected to any power supply
and read instructions before assembly. Always be sure to use the correct type
and wattage of bulbs as indicated on the fitting. Never exceed the wattage
stated.
When changing the bulb, always switch off at the mains and allow the old bulb
to cool down before handling. Dispose of used bulbs carefully.
Caution! The bulb and surrounding parts can become hot during use. The fitting
should be installed so the bulb is no closer than 30cm from the surface it is
illuminating For indoor use only.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish.
Replace bulbs from John Lewis or established brand of the same type and
compatibility
Parts list
Step 1
Instructions for use Carefully unpack the product from its packaging. LED Bulb
is pre-fitted to the product.
This product has a tilt angle range of approximately 10°. Insert the wall plug
into mains power outlet.
Bulb Replacement
Unplug from wall plug from the mains outlet and allow the lamp to cool before
replacing the bulb.
Remove the bulb using bulb suction fitting tool, turn anticlockwise to remove
bulb. Insert a new bulb into the lamp holder. (see below)
Table lamp is now ready for use.
Supplied LED GU10 bulb information:
Read More About This Manual & Download PDF:
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>