Johan Lewis Tilt Marble Led Floor Light User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
Johan Lewis Tilt Marble Led Floor Light User Manual
Tilt Marble Led Floor Light
Recommended bulb
1 x 21 Watt integrated energy efficient LED (non-replaceable)
Specification
Max power: 21W
Voltage: 220~240V, 50Hz
IP20 Weight 5.2Kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal
house-hold waste and it should be recycled. John Lewis does not operate in
store take back, but as members of the Distributer Take Back scheme have
funded the development and upgrade of recycling facilities across the UK.
Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
Trouble shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order. John Lewis partnership
171 Victoria Street London SW1E 5NN Johnlewis.com
Made in China Issue 02 09/19
Thank you for purchasing this Tilt Marble LED floor lamp. Please read the
instructions carefully before use to ensure safe and satisfactory operations
of this product.
Please keep this instruction for future reference.
Warnings!
The supply cable runs through the inside of this product. Take care not to
place undue stress on the cable whilst unpacking to prevent the possibility of
a poor connection.
If you are in any doubt consult a person competent to give advice on the
assembly of electrical equipment.
If the external flexible cable of the lamp is damaged it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard. To prevent electrocution switch off at the
mains supply before assembling or maintaining this fitting. Ensure the plug is
not connected to any power supply and read instructions before assembly.
Caution! The bulb and surrounding parts can become hot during use.
For indoor use only. The light source of this luminaire is not replaceable;
when the light source reaches the end of its end of life the whole luminaire
shall be replaced.
For indoor use only.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish.
Parts list
Assembly
Never assembly your appliance on a wet, freshly painted surface. Ensure to off at the mains supply before assembling or maintaining this fitting.
Step 1
Unpack the product and remove all packaging. Be careful not to scratch the
surface of the product whilst removing the wrapping.
Lay the product out on the floor. If the floor is not carpeted please cover it
with a soft cloth to avoid damage to the flooring and surface of the product.
Assembly should take place with the product lying flat. Rotate the centre pole
onto the lamp holder/head section ensuring that the lamp holder section is
kept still and that the pole is threaded on ensuring that the cable does not
twist.
Step 2
Rotate the lower pole onto the centre pole section ensuring that the centre pole is kept still and that the pole is threaded on ensuring that the cable does not twist.
Step 3
Rotate the base section onto the pole assembly. Keep the poles parallel to
avoid cross threading. Keep the upper poles stationary and only rotate the
base section. Stand the floor lamp upright and ensure all the assembled parts
are fully tightened.
Floor lamp is now ready for use.
Read More About This Manual & Download PDF:
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>