nedis Fully Wireless Earphones voice control User Guide

: June 7, 2024
: nedis

Table of Contents

Fully Wireless Earphones
- with voice control
- HPBT3052WT
Quick start guide
Fully Wireless Earphones HPBT3052WT
Specifications
Safety instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fully Wireless Earphones

with voice control

HPBT3052WT

nedis Fully Wireless Earphones voice control

ned.is/hpbt3052wt

A

nedis Fully Wireless Earphones voice control A

nedis Fully Wireless Earphones voice control B

nedis Fully Wireless Earphones voice control C

Quick start guide

Fully Wireless Earphones HPBT3052WT

For more information see the extended manual online: ned.is/hpbt3052wt

Intended use
The Nedis HPBT3052WT is a pair of fully wireless earphones.
The product can be paired with any Bluetooth enabled audio/video device.
The earphones can be charged up to 4 times in the fully charged case.
Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product	Fully Wireless Earphones
Article number	HPBT3052WT
Power input	5 VDC / 0.3 A
Bluetooth® version	5.0
Bluetooth® frequency range	2402 – 2480 MHz
Frequency response	20 – 20,000 Hz
Max. radio transmit power	4 dBm
Impedance	32 Ω
Sensitivity	103 ± 3 dB
Driver size	10 mm
Voice control	Siri, Google Assistant
Battery type	Lithium-Polymer (earphones)

Lithium-Polymer (charging case)

4

Main parts (image A)

Lid
Micro USB port
Left earphone slot
Charging indicator LED
Status indicator LED
Left earphone button
Right earphone slot
Right earphone button
Micro USB cable

Safety instructions

WARNING

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Only use the product as described in this document.
Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
Do not expose the product to direct sunlight, naked flames or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Do not open the product.
Keep the product out of reach from children.
This product is not a toy. Never allow children or pets to play with this product.
Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Charge the battery for at least 2 hours when you use it for the first time.
Only use the provided USB charging cable.
Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
Disconnect the product from the power source and other equipment if problems occur.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.

5

Do not short circuit.
Do not repair the product. If damaged, it must be properly disposed of.

Pairing the earphones to a Bluetooth audio source

Take the earphones out of the charging case. The earphones switch on automatically.
Press and hold both earphone buttons A A for 2 seconds to switch the earphones on manually.
The status indicator LED A blinks red and blue to indicate pairing mode is active.
Enable Bluetooth on the device you want to pair the earphones with.
Select “HPBT3052WT” from the list of available Bluetooth devices on your device.

Charging the product

1. Plug the Micro USB cable A into the Micro USB port A of the charging case.
2. Plug the other end of A into a computer or power adapter.
3. Plug the power adapter into a power outlet.
The charging indicator LED A lights up red when charging.
A lights up red when the case is fully charged.

4. Place the earphones into the respective slots A A and close the lid A to charge the earphones.
5. The status indicator LED A on the earphones lights up red.
6. A switches off when the earphones are fully charged.
The earphones and the charging case can charge simultaneously.

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

To answer an incoming call, press A or A.
To reject an incoming call, press and hold A or A for 2 seconds.
To end a call, press A or A.

Controlling the music

Press A or A to play or pause the music.

6

Double press A to skip to the next track.
Double press A to skip to the previous track.

Add Siri/Google Assistant function
Press and hold A or A for 3 seconds to activate Siri/Google Assistant.

Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product HPBT3052WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/hpbt3052wt#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC’s-Hertogenbosch, the Netherlands

7

Nedis BV
De Tweeling 28, 5215 MC’s-Hertogenbosch
The Netherlands 06/20