Aerpro Led Daytime Running Lights Instructions
- June 7, 2024
- Aerpro
Table of Contents
DTRL600S
Inclusions
Installation
- Use DTRL rubber support base as a template for marking holes required for attachment
- Drill holes into the bumper
- Line up DTRL to pre-drilled holes and secure with screws or bolts provided
Wiring Instructions
- To mount DTRL’s, use supplied rubber support base & mounting hardware.
- Connect the supplied wiring harness.
- 3 input wires +12V/24 DC ignition or accessory wire
- Wire with ( symbol) to car ground (chassis) of vehicle
DTRL Wiring Instructions
For DTRL usage a relay is required
Wiring Instructions cont…
- To mount DTRL’s, use supplied rubber support base & mounting hardware.
- Connect the supplied wiring harness.
- 3 input wires +12V/24 DC ignition or accessory wire
- Wire with ( symbol) connect to 87a of relay
- Connect headlight to 86 of relay
- Once connected, turn on to ignition, DTRL’s will turn on. Turn on parker lights and DTRL’s turn off
Notes: Some vehicles including CANBUS may require an additional relay to be installed between the DTRL and parking light connection. This is to fix flickering problems with the LED′s.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>