August LED Bluetooth Desk Lamp User Manual
- June 7, 2024
- August
Table of Contents
August LED Bluetooth Desk Lamp
Thank you for purchasing the August LEC630. This user manual is designed to familiarize you with all the features of this device. Please take the time to read this user manual carefully, even if you are already familiar with a similar product.
Safety
To ensure the safety of you and others, please read the Safety Instructions
before using this device. Please do not disassemble the LEC630, it can be
unsafe and will invalidate the manufacturer’s warranty.
Disposal
Please ensure the product and accessories are disposed of in compliance with
the WEEE (Waste Electrical and Electronic Equipment) Directive and any other
regulations applicable to your country. Always check with the environment
agency and any other relevant authorities for current disposal regulations.
Declaration of Conformity
The Declaration of Conformity can be found on our website at
http://augustint.com/en/declaration/
Customer Service
You can contact us by phone on: +44 (0)845 250 0586 or by email at:
service@augustint.com should you require
further technical support or customer service.
Safety Instructions
Storage and Use
Maintenance
Please unplug all leads before cleaning this device.
Main Features
- Low Consumption LED Lamp
- Touch Control 3 Steps Adjustable Brightness
- Integrated Warm Night-Light Function
- Built-in 7W Bluetooth v4.0 Speaker
- 2.1A USB Charging Port for Tablet and Smartphones
Box Contents
Part Names and Functions
- 3.5mm Audio Jack
- USB Port, Output 5V / 2.1A
- Power Socket, DC-IN 12V
- Volume Up
- Previous Track
- Play I Pause
- Status LED
- Next Track
- Volume Dow
- LED
- Light Power Button
Operation
LED Lamp
Use the provided power adaptor to plug the LEC630 to a powered electrical
plug. Press no turn on /off the LED lamp.
Whilst the LED lamp is on, press* to adjust the brightness or turn the LED
lamp off.
Night-Light
Press and hold* for 3 seconds to turn on I off the night-light.
Bluetooth Speaker
Operations
To turn the speaker on, press and hold Pause for 3 seconds. To turn the
speaker off, press and hold Pause for 3 seconds.
Initial Connection
- Turn the speaker on by pressing and holding Pause for 3 seconds. The speaker will enter pairing mode. In pairing mode the status LED flashes blue quickly.
- Scan for available Bluetooth devices on your source device.
- Select ‘LEC630’ from the available devices and confirm the connection. If a pin code is requested, please enter the code ‘0000’.
- Once successfully connected, the status LED will light blue.
Reconnection
- Press and hold Pause for 3 seconds. The speaker will enter pairing mode and reconnect automatically to any previously known devices.
- Once successfully connected, the status LED will light blue.
- If no previously known devices are available after 2 seconds, the speaker will renter pairing mode and be available to any new devices.
Pair to a new device
- Turn the speaker on by pressing and holding button for 3 seconds.
- Press and hold button simultaneously for 5 seconds to force the speaker onto pairing mode. This action can be done when the speaker is already connected to another device. In pairing mode the status LED will flash blue quickly.
- Scan for available Bluetooth devices on your source device.
- Select ‘LEC630’ from the available devices and confirm the connection. If a pin code is requested, please enter the code ‘0000’.
- Once successfully connected, the status LED will light blue.
Audio-ln
Press and hold button for 3 seconds. Plug your source device to the LEC630
using the provided 3.Smm audio cable. The Audio-In mode will be enabled
automatically and music playback will start.
use Power Output
Use the USB power output ports to charge or power a device.
Specifications
Light Power| 5W
240 Lumens 5000-6000K
Ra>80
---|---
Maximum Brightness Colour Temperature Chromaticlty
Speaker Power Bluetooth Version
Bluetooth Profile
| 7W
v4.0 + EDR A2DP/AVRCP/HSP/HFP
Bluetooth Distance Transmission Frequency
USB Power Output
| 10m
2.40GHz – 2.48GHz DC 5V/2.1 A
Power Supply| DC 12 V / 1.5A
Dimensions
Weight
| 129 x 141 x 490mm
800g (excluding adaptor)
Warranty
This product is guaranteed for twelve months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge (where possible) during this period. An alternative product will be offered in case the product is no longer available or repairable.
This warranty is subject to the following conditions:
- The warranty is only valid within the country where the product is purchased.
- The product must be correctly installed and operated in accordance to the instructions given in this user manual.
- The product must be used solely for domestic purposes.
- The warranty only covers the main units, and does not cover the accessories.
- The warranty does not cover the damage caused by misuse, negligence, accident and natural disaster.
- The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repairs. T he manufactures disclaim any liability for incidental or consequential damages.
- Please consult our customer adviser before returning any product; we are not responsible for any unexpected product returns.
- Any faulty product must be kept and returned in the original packaging with all the accessories and the original copy of the purchase receipt.
The warranty is in addition to, and does not diminish, your statutory or legal rights.
Customer Service:
Telephone: +44 (0) 845 250 0586
Email: service@augustint.com
This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of conformity may be consulted online at http://www.augustint.com/en/declaration
August international Ltd United Kingdom
Tel: +44 (0)845 250 0586 -.augustint.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>