Teufel Rockster Cross User Guide

July 20, 2024
Teufel

Teufel Rockster Cross

Specifications :

  • Input: 20V DC / 3.25 A
  • Battery Type: Lithium-Ion, 7.4V, 5510mAh
  • Output Power: 2.5 mW / 4 dBm
  • Manufacturer’s Name: Lautsprecher Teufel GmbH
  • Output Power: 84.3%, 0.10W

Product Usage Instructions

  1. Setting Up:
    Unbox the Teufel ROCKSTER CROSS and ensure all components are included as per the scope of delivery.

  2. Powering On:

    • Connect the provided power adapter to the input on the device (20V DC / 3.25 A).
    • Press and hold the power button for 3 seconds to turn on the device.
  3. Bluetooth Connectivity:

    • Activate Bluetooth on your desired device and search for available devices.
    • Select ‘Teufel ROCKSTER CROSS’ from the list of available devices to pair.
  4. Audio Playback:

    • Play your favorite music or audio content on your connected device.
    • Adjust volume and settings using the controls on the Teufel ROCKSTER CROSS.

Frequently Asked Questions (FAQ):

  • Q: What should I do if I encounter Bluetooth pairing issues?
    A: Ensure that the Teufel ROCKSTER CROSS is in pairing mode and that your device is within range. Try disconnecting and reconnecting the devices.

  • Q: How can I check the battery level of the device?
    A: The Teufel ROCKSTER CROSS may have indicators or you can check the battery level on your connected device.

  • Q: Can I use the Teufel ROCKSTER CROSS while charging?
    A: Yes, you can use the device while it is charging, but ensure it is not placed near water or in a humid environment.

Fender® × Teufel ROCKSTER® CROSS

Scope of delivery

Connect and charge battery

Bluetooth® connection

Volume and playback

Connect mode

Technical data

Dimensions (W × H × D)|

  • 385 × 149 × 129 mm
  • (15.2 x 5.9 x 5.1 inch)

---|---
Weight| 2,82 kg (6.22 lbs)
Power supply| 20 V DC / 3,25 A
Battery| Lithium-Ion/7,4 V/5510 mAh
Frequency bands| 2402–2480 MHz
Transmission power| 2,5 mW/4 dBm
Power supply

Manufacturer’s name| Dongguan Dongsong Electronic Co. Ltd.
Model number| DYS865-200325W
Power consumption /| 100–240 V~ / 50/60 Hz / 1,5 A
Output power| 20,0 V DC / 3,25 A / 65,0 W
Average efficiency| 90,0 %
Efficiency at low charge (10%)| 84,3 %
No load power consumption| \0,10 W

© All trademarks and brand names are the property of their respective owners.

  • Bluetooth® is a registered trademark of the Bluetooth SIG, Inc.
  • Qualcomm® aptX™and Qualcomm® aptX™ HD are products of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the U.S. and other  countries. aptX™ is a trade-mark of Qualcomm Technologies International, Ltd. registered in the U.S. and other countries.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

  • * If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi transmitter product procedures.
This product should be installed and operated with minimum distance 20 cm between the radiator and your body.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals