LINDY 4343345 (30m) Fibre Optic USB 3.0 Cable User Manual
- June 3, 2024
- LINDY
Table of Contents
LINDY 4343345 (30m) Fibre Optic USB 3.0 Cable
Introduction
Thank you for purchasing the Lindy Fibre Optic USB 3.0 Cable. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. This Fibre Optic USB 3.0 Cable supports far longer distances than standard copper cables. A more light and flexible construction makes this cable simple to install with cable trays and through conduits.
Package Contents
- Lindy 30m/100m Fibre Optic USB 3.0 Cable
- This manual
Features
- USB standard USB 3.2 / 3.1 Gen 1 / USB 3.0 (max. 5Gbps), backward compatible with USB 2.0 / 1.1
- 850nm Laser Optical Transmission Technology
- Transmission Medium: Optical Fiber 62.5/125/250 MM
- Low RFI/EMI for sensitive environment
- Connectors: USB A male, USB A female with USB A male for power
- Jack diameter/material: 3mm (0.12in) / TPU
- Nominal Attenuation: 4dB/km
- Min. Bend Radius: 30mm (1.18in)
- Max. Tensile Load: 0.3GN/m²
- The number of connected devices can be increased by adding a USB hub
- Plug & Play
- Operating Temperature: 0°C – 70°C (32°F – 158°F)
- Storage Temperature: -20°C – 85°C (-4°F – 185°F)
Installation
Connect the USB 3.0 Type A plug to your host computer´s USB 3.0 port. Then connect your USB device to the USB A female port of the Active Optical Cable. Finally connect the included USB Type A male cable to a USB power supply.
Note
The min. bending radius of this cable is appr. 30mm/1.18 inch, never bend the
cable to a smaller radius because this would destroy it. Never step on the
cable or put heavy pressure on it. The max. tensible load to this cable is
0.3GN/m². Never pull the cable with a higher load.
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Hersteller / Manufacturer (EU)
LINDY-Elektronik GmbH Markircher Str. 20 68229 Mannheim Germany
Email: info@lindy.com T: +49 (0)621 470050
Manufacturer (UK)
LINDY Electronics Ltd. Sadler Forster Way Stockton-on-Tees, TS17 9JY England
sales@lindy.co.uk
T: +44 (0) 1642 754000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>