nedis Digital Audio Converter User Guide
- June 7, 2024
- nedis
Table of Contents
Digital Audio Converter
RCA + Toslink 2x RCA
ACON2509BK
Digital Audio Converter
For more information see the extended manual online: ned.is/acon2509bk
Intended use
- This product is intended to convert an RCA signal or a Toslink signal into a stereo RCA signal.
- The product is intended for indoor use only.
- The product is not intended for professional use.
- Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
| Product | Digital Audio Converter |
|---|---|
| Article number | ACON2509BK |
| Power input | 5.0 VDC ; 0.6 A |
| Conversion | RCA + Toslink to 2x RCA stereo audio |
| Supported formats | PCM |
| Supported bitrates | 44.1 kHz 24-bit |
48 kHz 24-bit
96 kHz 24-bit
Main parts (image A)
1 Power indicator LED
2 Stereo RCA female output
3 Power port
4 Input selector switch
5 RCA female input
6 Toslink female input
7 DC to USB power cable
Safety instructions
-WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Only use the provided power cable.
Installation
1. Make sure all the devices you want to connect have been switched off.
2. Plug an RCA cable (not included) into the RCA female input A5 or plug a
Toslink cable (not included) into the Toslink female input A6.
3. Plug the other end of the cable into your audio source device.
4. Plug a twin RCA cable (not included) into the stereo RCA female output A2.
5. Plug the other end of the cable into your audio output device.
Connecting the power supply
1. Plug the DC to USB power cable A7 into the power port A3.
2. Plug the other end of A7 into a USB power source or adapter. The product
switches on. The power indicator LED A2 burns blue.
Use
1. Select the input port with the input selector switch A4.
2. Switch on the connected audio devices.
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>