Cameras WiFi Magnetic Hitch Camera User Manual
- June 7, 2024
- Cameras
Table of Contents
Cameras WiFi Magnetic Hitch Camera
Note: please goto download latest instruction manuals!
Note: please read the manual carefully before using!
INTRODUCTION
The user manual has a detailed description on how to correctly use the hitch camera and provides detailed product information, including operation, installation precautions and technical specifications.
PACKAGE LIST
- 1x Color Waterproof Wifi Hitch Camera with Magnetic Base and Rechargeable Battery and Infra-red Night Vision • 1x 2.4G antenna(5DB)
- 1x antenna extender cable(10ft)
- 1x car charger power cable
- 1x USB charger cable(indoor)
- 1x magnetic car vent mount kit
FEATURE
- WiFi Connection : View hitch camera on mobile device, 2.4G WIFI wireless transmission, 5DB antenna. • APP WIFI wireless cameras support Apple cell phone interconnects and Android.
- Magnetic Camera Mount : Magnet anti-skid function, Mounts anywhere with no hardware.
- Built-in Rechargeable Battery,up to 16H working time at daytime, Recharge with Car Charger cable.
- Four 940 Infra-Red Lights night Vision.
- Completely Waterproof Camera with an IP67 Rating.
- Transmission bandwidth 8MHZ,82ft in open distance.
- Horizontal and left and right viewing andgle are larger than 120 degree.
- DC 5.5 female connector,12-24V DC charging,short circuit and over-voltage protection.
- Battery display indicator, low voltage red light indicator.
- Support for charge while using.
BEFORE BEGINNING INSTALLATION
Please indoor 5-minute simple basic function test verification before actual installation on the cars/trucks.
FUNCTIONS OF EACH PART
CAMERA INSTALLATION
- Attach camera close to hitch ball, centered on vehicle.
- Adjust the camera angle.
- Recommended installation placement
MONITOR/SMARTPHONE INSTALLATION
- To Attach the Pedestal mount to the dashboard or to the head-liner using self-tapping screws and/or the adhesive pad.
- Attach monitor to mount, and adjust mounting angle to allow optimum driver viewing comfort.
- Recommended installation location.
- Download and install APP
- Scan the QR code for your device below and download the App, For iPhone/iPad, if you can’t download by scanning qrcode, please search “SWD Camera” APP for apple store to install
START TO USE
- First turn ON the camera by long press the power button, then the red led will turn on.
- Open Wifi settings on your phone and connect to WiFi network named “SONiX_***”
- You must wait to confirm the WiFi connection status and keep it for about 5 seconds, then you can open the app, otherwise you will immediately encounter the “no picture” problem.
- You will now be able to see the camera view on your smartphone!
FINISH/END TO USE
Turn OFF the camera by long press the power button, then the four led will flash once at the same time,avoiding the camera is always ON and therefore can drain the built-in battery.
FUNCTIONS AND OPERATION
- Image flip setting: toggle between mirror/normal image.
- Gridline setting :toggle between gridline ON/OFF.
- Three charging methods: car charge cable and usb charge cable and power cable.
SPECIFICATION & DIMENSION
Image Sensor | 1/3” Color CMOS |
---|---|
Resolution | 640*480 |
System | P/N automatically |
Viewing Angle | 120˚ |
Transmission Distance | Normal wifi distance,82ft in open distance |
Battery Capacity | 6800mAh |
Parking Guide Line | On/Off switchable |
Compatible System | IOS & Android |
Battery working time | 16hrs(continuous daytime) 13hrs(continuous night) |
Battery standby time | 35hrs(continuous daytime) 20hrs(continuous night) |
Battery charging time | 8hrs(80%),16hrs(100% full) |
Night Vision | 4 infra-red lights |
Frequency | 2400-2483.5MHz |
Waterproof Level | IP 67 |
shockproof Level | 4G |
Battery Level Display | 4 LED lights |
Receive Sensitivity | -89dBm |
--- | --- |
Operation Temperature | –20℃ ~ 70℃ |
Storage Temperature | –30℃ ~ 85℃ |
TROUBLESHOOTING
If you have any questions about this product, Please send us an mailbox!
-
Failed to download and install APP
- The APP is not suitable for Motorola/Nokia/Google phones and Android 10.1,IOS 13.5.1 version or above, please check the version of your phone system before purchasing.
- For iPhone/iPad, if you can’t download by scanning qrcode, please search “SWD Camera” APP for apple store to install.
-
No signal, No found WiFi network named “SONiX_***”
-
Please check whether the camera is powered on.
-
Please check whether antennas are plugged on the camera.
-
Please check the angle of the antenna.
-
Please check whether metal obstacles near the antenna.
-
Out of range, please add an antenna extender cable or change the camera mounting location
-
First,Whether it is in power on mode? Observe whether the red led is on after SHORT press the power button. Second,Whether it is in power off mode?Observe whether the red led is on after LONG press the power button. At last, Is draining the battery ?Please charge first!
-
No picture
-
Please check whether the phone is currently connected to the WiFi network named “SONiX_***”(No Inernet Connection), but not the other WiFi network names, avoid the other wifi network(not “SONiX_xxx”) auto-join and force forget this network, Only allow the wifi network named “SONiX_xxx” auto-join.
-
Out of range, the wifi signal is blocked too badly or fps<10, please add an antenna extender cable or change the camera mounting location.
Note: You must wait to confirm the WiFi connection status and keep it for about 5 seconds, then you can open the app, otherwise you will immediately encounter the “no picture” problem. -
Please check low voltage red light blinking(flash) indicator, please charge first!
-
Freezes and disconnects / Unstable / static video
-
Out of range, Please add an antenna extender cable or change the camera mounting location.
-
The wifi signal is blocked too badly or fps<10, please add an antenna extender cable or change the camera mounting location.
-
Fuzzy picture,Not clear
-
Please remove the camera lens protector to get best picture quality after install.
-
Please check whether wipe off the camera lens.
-
The mounted camera slides or falls
Please check whether remove the film from the camera base, or Not steel iron furface.
FAQs
Q: Do you provide instruction manuals?
A: Please goto the product website and download latest instruction
manuals document.
Q: Do the backup camera systems work at night?
A: Yes, with infra-red lights and all come with excellent night vision.
Q: Will I be able to install a camera system myself?
A: Many people do have the handiness to install our systems without
having to hire assistance.
Q: Battery life
A: fully charged for 8 hours(80%) and 16 hours(100% full), 16 hours
continuous use(daytime),cold weather will consume power a little faster.
A2: The battery life is superb. I charged it fully and used it for months
off one charge but I did turn it off when it wasn’t in use.
Q: How to check if the camera is in power-on mode or power-off mode?
A: Please check after short press the power button, power-on mode when
the red led is on status ,power-off mode or draining the battery when the red
led is off status.
Q: How to check whether the camera is draining the battery ?
A: the four leds of the camera are always off by long press the power
button hold 3 second.
Q: How to power on/power off ?
A: power on: the red led on when long press the power button hold 3
second.
power off: the full four led blink on and then all off when long press the
power button hold 3 second.
Q: How to check the battery?
A: In power on mode, Please check whether the four leds of the camera
indicator by short press the power button,
one red led on plus three green led on(about 100%),
one red led on plus two green led on(about 75%),
one red led on plus one green led on(about 50%),
one red led on plus three green led off(about 25%),full four led off (about
0%).
Q: How to check low voltage of the “No picture /Fuzzy picture”
A: the red LED blinking(flash) indicator, please charge
first!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>