Cameras X38 Camera User Guide
- June 3, 2024
- Cameras
Table of Contents
Cameras X38 Camera
User Guide
ABOUT PHONE
Overview
1. Camera
2. LED
3. Speaker
4. Power key
5. Volume key| 6. Volume key
7. Function key
8. Reset
9. Mic
10. Memory Card
11. USB
---|---
BEFORE USING
The device needs to be plugged into an SD card.
GETTING STARTED
Basic Function:
-
Turn on the phone
Connect the Charger and the device will start automatically. -
Turn off the phone
Long press the power key until a menu shows. Choose “Power off’’ to turn off . -
Restart the phone
Long press the power key until a menu shows. Choose “Restart’’ to restart.
Working condition of equipment
Voice prompt :“camera is power on’’
Quick Menu
-
Volume Control
Adjust media volume, ring tone, and notification volume -
Bluetooth switch
When turned on, you can search for nearby Bluetooth devices
-
BLAN switch
Once Open, you can search for nearby networks
-
Settings Menu
You can change time, language, restore factory settings, view device information, and soon
LED light flicker status
Blue Light :The blue light flashes when the machine is turned on
Red Light :Flashing red lights while the equipment is working5. LED light
flicker status
Blue Light :The blue light flashes when the machine is turned on
Red Light :Flashing red lights while the equipment is working
WARNING
The power output is 5V/2A .
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this evice must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party esponsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should beinstalled and operated with minimum 20cm distance between the
radiator and your body. Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>