Member s Mark Teak Porch Swing Instruction Manual
- June 7, 2024
- Member s Mark
Table of Contents
Member s Mark Teak Porch Swing Instruction Manual
Important Safety Information
- Please read all instructions carefully before assembling this
- For your safety, assembly by two or more adults is strongly
- Use only vendor-supplied hardware to assemble this Using unauthorized hardware could jeopardize the structural integrity of the item.
- Hardware may loosen overtime. Periodically check that all connections are tight
Before Assembly
- Remove all parts and hardware from the Place all items on a carpeted or scratch-free work surface, as this will avoid damaging parts during assembly.
- The shipping box provides an ideal work
- To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the shipping carton until assembly is
- Use the parts and hardware lists below to identify and separate each of the pieces
- The use of power tools for assembly is not Power tools can damage the hardware and/or split the wood.
- Note : Do not fully tighten all bolts until all pads are in place. Failure to follow these instructions may cause the bolts to misalign during assembly.
WARNING-TO AVOID RISK OF FALLING
- WEIGHT LIMIT 500 LBS
- Swing is intended to be used by two persons at a
- Swing must be used with all provided Ensure that all parts are installed according to instructions and inspected for damage before use.
- Ensure that all bolts and hardware are securely tightened and installed before
- Never place infants or pets in the
- Never allow young children to use chair without adult
- Do not jump, stand, or twist in
- Swing are designed for minimal swing Use care when getting in and out of swing.
MAINTENANCE
it to teak wood’s natural characteristics, wood color and grain variations may be resent. This is a symbol of the originality of each unit and gives each finished piece a distinctive look and inherent charm.
Care Instruction :
Teak wood, when left bare and unsanded, will naturally fade to a silver-
gray color. This silver-gray color transformation does not in any way affect
the durability of the furniture.
To maintain the smooth finish and golden brown color of your teak furniture, you will need to sand the furniture regularly. To prolong the period of time needed between anding, teak oil may also be applied.
If you choose to apply teak oil, apply every 6 months, or follow the teak oil container actions. Again, if you choose to maintain the smooth brown finish of your teak Lure, this method requires some regular maintenance, such as sanding and application of teak of Teak oil, along with sanding, will help maintain the golden brown color.
Staining :
please note, once you stain your teak, it will not return to the natural
golden brown or weathered silver-gray color without sanding off the stain.
Staining is intended to be permanent. If you choose to gain your furniture
after it has turned silver-gray, you must first sand it before applying the
stain.
Do not leave your teak wood furniture in puddles of water or on wet ground.
Cover your teak wood furniture during winter months or move Into covered storage, if in wet climates.
The manufacturer supports protection of the world’s forest resources and is
diligent II sourcing legally harvested wood.
Thank you
The manufacturer.
Component
-
A Right armrest 1 pc
-
B Left armrest 1 pc
-
C Back rest 1 pc
-
D Seat 1 pc
-
E Apron 1 pc
Hardware
-
(F) 1″ Screw Qty: 4 Pcs + 1
-
(G) 1 1/2″ Screw Qty: 2 Pcs + 1
-
(H) 1 1/2″ Bolt Qty: 6 Pcs + 1
-
(I) Wooden cap Qty: 6 Pcs + 2
-
(J) Washer Qty: 12 Pcs + 1
-
(K) Hanger bolt with chain & chain lock Qty: 2 Pcs
-
(L) Hanger bolt Qty: 2 Pcs
-
(M) Nut Qty: 6 Pcs + 1
-
(N) Head nut Qty: 4 Pcs
Tools Needed for Assembly
-
Phillips Screwdriver ( not included).
-
Wrench (included).
-
Rubber mallet (not included).
-
Adjustable wrench (not included).
-
Install on level ground. Attach the right armrest (A) to the back rest (C), secure using 1 1/2″ bolt (H).
-
Attach the apron (E) onto the seat (D). And then attach the seat (D) onto the back rest (C) and to right armrest (A) secure using 1 1/2″ bolts (H), position as shown.
-
Attach the left armrest (B) to the assembly from step 2, secure using 1 1/2″ bolts (H), 1″ screws (F) and 1 1/2″ screws (G) from underneath, position as shown, tighten using screwdriver. Tap in wooden caps (I) to cover bolt heads using rubber mallet.
-
Secure the hanger bolts with chain (K) into pre drilled holes of left armrest (B) using washers (J), nuts (M) and head nut (N), as shown. (The hanger bolt with long chain must be installed in front, short chain must be installed at the back). Repeat the same procedure to install the hanger bolts (K) into right armrest (A). Make sure all parts are correctly connected and tighten all nuts completely using wrench
-
To hang up the swing : Insert the hanging bolts (L) Into pre drilled holes of swing frame an( secure with washers (J) and nuts (M) as shown.Tighten the nuts using adjustable wrench. Insert and hang the hanger bolt with chain (K) to hanger bolt (L) and lock. Recommended height is 60 cm from the bottom of the seat to the ground.
NOTICE : Install not less than 6.5 feet from any obstruction such as fence, garage, house, overhanging branch laundry lines or electrical wires.