nedis Smart Power Plug User Guide
- June 7, 2024
- nedis
Table of Contents
WIFIPO120xxx
Quick Start Guide
Smart power plug
Description
1. On/off button Reset button
2. On off indicator
3. Connection status indicator
Use
1. Download and install the app “Nedis SmartLife“ from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app “Nedis SmartLife“.
3. Create a new account or log in to your existing account.
4. Tap “+” to add the device.
5. Select “Electrical outlet” from the list of products.
6. Plug in the smart power plug.
7. If the status indicator does not flash: Press and hold the reset button
for 6 seconds. If the status indicator flashes: Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Enter the device name.
Note : The device name will also be used by Amazon Alexa and Google Home.
Safety
• To reduce risk of electric shock, this product should only be opened by an
authorized technician when service is required.
• Disconnect the product from the mains and other equipment if a problem
should occur.
• Read the manual carefully before use. Keep the manual for future reference.
• Only use the device for its intended purposes. Do not use the device for
other purposes than described in the manual.
• Do not use the device if any part is damaged or defective. If the device is
damaged or defective, replace the device immediately.
• Do not touch the device with wet hands.
Cleaning and maintenance
Warning!
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the device does not operate
correctly, replace it with a new device.
• Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please visit www.nedis.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>