TAOTRONICS SoundLiberty 92 True Wireless Stereo Earbuds User Guide

: June 7, 2024
: TaoTronics

Table of Contents

PRODUCT DIAGRAM
IMPORTANT SAFETY INSTRUCTIONS
WEAR YOUR EARBUDS
USING YOUR EARBUDS
FUNCTIONS AND OPERATIONS
CLEANING AND MAINTENANCE
TROUBLESHOOTING
WARRANTY AND SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TAOTRONICS SoundLiberty 92 True Wireless Stereo Earbuds User Guide

PRODUCT DIAGRAM

Multifunction Touch Control
LED Indicator
Microphone
Charging Contacts
Reset Butto
Charging Slot
Charging Indicator
Charging Case
USB-C Charging Port

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.

Hearing Safety

Do not wear earbuds with high volume for a long time to avoid damagingyour hearing.
Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
Do not set volume too high to stay aware of your surroundings.
lease refer to local laws and regulations if you want to answer phone calls via this device during driving.
For your safety, avoid distraction from music or phone calls when you are driving or doing other activities with potential dangers.

Warning: Please set the volume to proper level to avoid hearing damages.

Caution

Do not expose this product to high temperatures.
Do not immerse the earbuds into water or expose them to humidity for a long time.
Do not clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
Avoid dropping.
Place the earbuds back into the charging case when not in use and keep it away from children and pets to avoid choking hazard.
Unauthorized disassembly of any parts of this product is forbidden, which may cause fire hazard, warranty voidance, and/or property loss.
Close attention is needed when using near children.
Keep the charging case away from water, rain or any other liquid.
Don’t use the product in thunderstorm to avoid malfunction or electric shock.
Always ask a professional technician or authorized personnel for repair.

Warning : This product contains lithium battery. Never expose it to excessive heat such as direct sunlight or fire to avoid explosion.

We, ZBT International Trading GmbH, herewith confirm that this product is in line with the basic requirements of EU regulation. A copy of the declaration of conformity can be obtained online at the following link: https://www.taotronics.com/pages/user-manual
Note: You can search “TT-BH092” in the link.

WEAR YOUR EARBUDS

Please wear the earbuds as shown below (Fig. 1)

WEAR YOUR EARBUDS
Pictures only for reference.

Bluetooth Caution

When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference.
The maximum effective Bluetooth range may vary with the environmental circumstances.
When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.

USING YOUR EARBUDS

Charging
Charging the Earbuds

Put the earbuds into the charging case as per the L (left) and R (right) marks (Fig. 2).
Cover the lid and charging will start automatically (Fig. 3).

Note:

Please fully charge the earbuds when using them for the first time.
When battery is low, a “Battery low” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
Charge the earbuds at least once every 3 months when not using for a long time.

Charging the Charging Case

Connect the charging port with any USB charging adapter or active computer USB port (Fig. 4).
The charging indicator will flash and turn solid white once fully charged.
Note: Unplug the charging cable (timely) when fully charged.

Power On (Fig. 5)
Uncover the lid and they will power on automatically.
WEAR YOUR EARBUDS

Power Off (Fig. 6)
Put the earbuds into the charging case and close the lid, they will turn off automatically.

Pairing

You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.
When the earbuds are disconnected from your device for more than 10 minutes, they will turn off automatically.

Binaural Mode

Uncover the lid to turn on the earbuds, they will connect with each other automatically. The LED indicators on both earbuds will flash blue and white alternately indicating the earbuds are in pairing mode now.
Turn on the Bluetooth function on your device and search for near by devices. Find “TAOTRONICS Sound Liberty 92” in the searching results, tap on the name to connect.
Once connected, the LED indicators on both earbuds will flash blue slowly.

Note:

The earbuds can remember the devices paired previously, and will attempt to pair with the last connected device. If re-pairing failed, the earbuds will enter pairing mode.
It is not recommended to wear the two earbuds on different people. If necessary, please keep the two earbuds close to each other in binaural mode.

Mono Mode

Take out one earbud from the charging case, and make sure the other one is placed in the charging case and the lid is covered.
It will try to pair with the last paired device first then enter pairing mode with its LED indicator flashing blue and white alternately if pairing failed.
Turn on the Bluetooth function on your device and search for nearby devices. Find “TAOTRONICS SoundLiberty 92” in the searching results, tap on the name to connect.
Once connected, the LED indicator will flash blue slowly.
Note: If you want to change to binaural mode, simply take out the other earbud from the charging case, they will pair with each other automatically.

Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing history as instructed below:

Put the earbuds back into the charging case, close the lid then open it.
Press and hold the Reset Button for 10 seconds until the LED indicators on the earbuds and the charging case flash white three times.
If you have paired your device with the earbuds before, remove “TAOTRONICS SoundLiberty 92” from the Bluetooth device list and pair again.
Re-pair with your Bluetooth® device as instructed in “Pairing” section.
Note: If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or clear “TAOTRONICS SoundLiberty 92” from its Bluetooth list. Restore the earbuds to factory settings as instructed above if pairing failed.

FUNCTIONS AND OPERATIONS

Function

|

Operation

|

Voice Prompt

---|---|---
Play / Pause| Tap the Touch Control on either of the earbuds twice under music| /
Volume +| Tap the Touch Control on the right earbud| Toots when highest setting is reached
Volume –| Tap the Touch Control on the left earbud| /
Next Track| Tap the Touch Control on the right earbud three times|

/

–

|

–

|

–

Note: Only when you are wearing the earbuds can you hear the voice prompt.

CLEANING AND MAINTENANCE

Clean the earbuds and the charging case on a regular basis.
Use dry and soft cotton cloth to wipe the unit.
Note: Do not insert anything into the product.
Keep away from sharp objects to avoid scratches.
Put the unit in a dry and shady place if it is not in use for a long time
Do not clean the product with detergent or chemicals.

TROUBLESHOOTING

TROUBLESHOOTING

–

N o.

|

Problem

|

Solution

1| Failed to turn on the earbuds| Earbuds low battery, please charge them

2

| Failed to charge the earbuds|

Place the earbuds into the charging case properly
Make sure the charging case is charged fully

3| Can’t charge the charging case| Make sure the charging cable is intact and plugged in properly

4

|

Can’t find “TAOTRONICS

SoundLiberty 92” in the Bluetooth device list

| The earbuds reconnected with previously paired device automatically:

Deactivate the Bluetooth function of previously paired device or clear “TAOTRONICS SoundLiberty 92” from its Bluetooth device list, and then search again
Put the device to be connected close to the earbuds

5

| Failed to pair the earbuds with your device|

Turn on the device and activate its Bluetooth function before pairing
Bring the earbuds into pairing mode as instructed in the “Pairing” section

6

|

No sound in one of the earbuds in binaural mode

| Place both earbuds back to the charging case then take them out, they will pair with each other automatically. If pairing failed, restore them to the factory settings as instructed in the “Clear Pairing List” section
7| Poor sound quality|

Wear the earbuds properly and keep them close to each other.
Place the connected device close to the earbuds or remove the obstacles between them
Clear the debris on the earbuds

8| Unstable connection|

Keep the earbuds close to your Bluetooth device
The effective distance may shorten with obstacles in the way
Turn off other Bluetooth devices to decrease the interference

9| Can’t hear the other party during a phone call| Set the volume to higher level
10| The other party can’t hear your voice during a phone call| Free the built- in microphone of any covers
11| Multifunction Touch control of the earbuds is unresponsive| Place the two earbuds into the charging case and cover the lid, disconnect the Bluetooth connection. Uncover the lid to turn on the earbuds and pair again.

WARRANTY AND SERVICE

If any problems occur, please contact the TaoTronics Customer Care Centre through the following ways. Hotline service: 1-888-456-8468 / Mon-Fri 09:00 – 17:00 PST and support@taotronics.com