VARTA A003295 LCD Universal Charger Plus Instruction Manual
- June 12, 2024
- VARTA
Table of Contents
VARTA A003295 LCD Universal Charger Plus
Package Content
Safety
Risk of injury! Primary batteries can burst while charging. Charge only NiMH
rechargeable batteries, no primary batteries. Integrated safety shutdown
control, 8h AA/AAA/D/9V and minus delta-V cut-off function.
A heating of rechargeable batteries and charger/adaptor while charging is
usual. Never charge corroded, damaged or leaking rechargeable batteries. Do
not open, throw into fire or short-circuit rechargeable batteries and charger.
In case of damages/failure contact a VARTA dealer.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
How To Use The Charger
Fig. 1: Attach cable. Charger can be used worldwide. Where necessary, use a
country-specific adapter.
Fig. 2: Insert rechargeable batteries. Both contacts of the battery must be
connected.
Fig. 3: charging indication: Charging
state of charge: 1 quarter circle=5-25%, 2=26-50%, 3= 51-75%, 4= 76-100%
5V USB solidly on= charging
Fig. 4: Charging mode 9V
a) Second charging channel is empty: 9V symbol is on and second circle
indicating the battery level is on
b) Second charging channel is occupied (AA, AAA): only 9V symbol is Žashing;
Second circle indicating the battery level is showing charging status of the
AA/AAA cell
Fig. 5: Description Display Modes
a) charging complete
b) charging
c) defective/wrong battery (Automatical recognition can take a few minutes)
d) processing
e) no symbol = failure: no contact, wrong polarity
f) 9V Flashing = charging, 9V fast flashing = error, 9V solidly on = charging
complete
The relative capacity is calculated within the charger by using the charging
time and current. Due to systemic reasons, NiMH cells can provide only few
reference points for the exact determination of the state of charge.
Therefore, under certain circumstances, the percentages on the display can
change faster than expected. The timer protects the rechargeable batteries
from overcharging.
Interrupting the power supply restarts the timer. Charging control function
protects the batteries from overcharging. Remove the batteries when the
charger is unplugged.
1)Environmental Protection
To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted municipal waste, but recovered, reused, or recycled. For further information on recycling please contact your local city council.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>