Nedis Bluetooth Connection to Stream Audio User Guide

June 7, 2024
nedis

Nedis Bluetooth Connection to Stream Audio User Guide
Nedis Bluetooth Connection to Stream Audio

Product Overview

Product Overview
Product Overview
Product Overview

Bluetooth Transmitter Receiver

For more information see the extended manual online: ned.is/bttc100bk

Intended use
The BTTC100BK is a device that allows you to transmit or receive Bluetooth audio. The BTTC100BK functions wirelessly with a built-in, rechargeable battery. The product is not intended for professional use. Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Prodtuct Bluetooth Transmitter Receiver
Article number BTTC100BK
Power supply 5 VDC / 1 A
Battery Lithium-Polymer
Max. battery lifetime Up to 6 hours
Max. battery charging time Up to 2 hours
Maximum Standby Time Up to 220 hours
Bluetooth® version Bluetooth® 5.1
Maximum transmission power 2 dBm
Bluetooth frequency range 2402 – 2480 MHz
Wireless Transmission effective distance Up to 10 meters
Bluetooth profiles A2DP / HFP / HSP
Supported codecs SBC
Connections AUX output/input / Micro USB

Main parts

(image A)

  1. Mode switch
  2. Bluetooth indicator LED
  3. Charging indicator LED
  4. Power button
  5. AUX output/input
  6.  Micro USB charging port
  7. 3.5 mm female to 2x RCA cable
  8. 3.5 mm to 3.5 mm audio cable
  9. USB charging cable

Safety instructions

WARNING

  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
  • Only use the product as described in this document.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
  • Do not drop the product and avoid bumping.
  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
  • Disconnect the product from the power source and other equipment if problems occur.
  • Do not expose the product to water or moisture.
  • Do not dismantle, open or shred secondary cells or batteries.
  • Do not expose cells or batteries to heat or fire. Avoid storage in  direct sunlight.
  • Retain the original product literature for future reference.
  • Do not leave a battery on prolonged charge when not in use.
  • After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
  • Batteries contain explosive gases. Prevent contact with flames and sparks. Provide adequate ventilation during charging.
  • Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
  • Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
  • Read the manual carefully before use. Keep the manual for futurere ference.

Charging the product

  1. Connect A9 to A6.
  2. Plug the other end of A9 into a 5V/1A USB adapter (not provided).
  3. Plug the USB adapter into a power outlet. A3 lights up to indicate that the product is charging. A3 switches off when the battery is fully charged.

Switching the product on/off

  1. Press and hold A4 for 3 seconds to switch the product on or off.
    Note : The product automatically switches off when it is not paired within 5 minutes.

Receiver mode (image B)

  1. Set the mode switch A1 to RX.
  2. Plug the 3.5 mm to 3.5 mm audio cable A8 into the aux output/ input A5.
  3. Plug the other end of A8 into the audio device. 4 You can also connect an audio device with the 3.5 mm female to 2 x RCA  cable A7.
  4. Switch on the product. A2 flashes quickly.
  5. Enable Bluetooth on the device you want to pair.
  6. Select “BTTC100BK” from the list of available Bluetooth devices on your device. A2 flashes slowly to indicate pairing is successful.
  7. Press A4 to play or pause music.

Transmitter mode (image C)

  1. Set A1 to TX.
  2. Plug A8 into A5.
  3. Plug the other end of A8 into your audio source. 4 You can also connect an audio device with the 3.5 mm female to 2 x RCA cable A7.
  4. Switch on the product. A2 flashes quickly.
  5. Keep your Bluetooth audio device within range and switched on. 4 Pairing time will vary depending on the device used. A5 flashes slowly to indicate pairing is successful.

Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product BTTC100BK from our brand Nedis® , produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: webshop.nedis.com/BTTC100BK#support

For additional information regarding the compliance, contact the
customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28 5215 MC ’s-Hertogenbosch, the Netherlands

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals