DANCO Universal Diverter Handle w/Adapter 80015 Instructions

DANCO Universal Diverter Handle w/Adapter 80015

Instructions

Tools Required: Screwdriver, Allen Wrench (included)

1. Turn off water supply to faucet.
2. Pry off old handle button (A) with small screwdriver.
3. Remove handle screw (B) and keep for re-use.
4. Remove old handle (C).
5. Place handle adapter (D) over faucet stem (E) and tighten with wrench provided.
6. Place replacement handle onto adapter.
7. Once installed, if handle contacts the faucet base or wall, remove handle and insert correct spacer (F) onto adapter (choose correct spacer that provides adequate clearance between handle and faucet base or wall).
8. Insert handle screw (B) into washer (G), then into handle and tighten.
9. Place replacement handle button into top of faucet handle.
10. Turn on water supply to faucet. Check for leaks.

©2019 Manufactured for Danco, Inc., Irving, TX 75062 Made in China/Hecho en China 80015

Documents / Resources

| DANCO Universal Diverter Handle w/Adapter 80015 [pdf] Instructions
Universal Diverter Handle w Adapter 80015
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>